QA/QC Inspector I Danaher CorpQA/QC Inspector ITimonium, MDPerform final inspection of finished products in accordance with approved specifications, inspection procedures, sampling plans, and quality documentation, verify that finished products meet visual, functional, and performance requirements prior to release. From airplane engines to hydraulic systems, scotch to smartphones, OLED screens to paper-everyday Pall is there, helping protect critical operating assets, improve product quality, minimize emissions and waste, and safeguard health.
AMPP / NACE Coatings Inspector HRV CONFORMANCE VERIFICATION ASSOCIATES, INCAMPP / NACE Coatings InspectorBaltimore, MD$35–$50 / hourPrepare and submit accurate daily and/or weekly inspection reports documenting work performed, inspection findings, testing results, and compliance with project specifications. The successful candidate will perform quality assurance inspections throughout all phases of the coating process, including surface preparation, environmental monitoring, coating application, and final acceptance.
Maryland State Inspector - $7,500 Bonus Carvana CoMaryland State Inspector - $7,500 BonusBaltimore, MD$30–$35 / hourWe have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process. We also have a variety of other automotive roles available in one of our 17 locations across the country - take a look at our Careers site to apply for one of the following roles: Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles.
NDE Inspector Starship Space Exploration Technologies CorpNDE Inspector StarshipWestminster, MD$25–$33.50 / hourPREFERRED SKILLS AND EXPERIENCE: Additional nondestructive evaluation Level II OR III certifications in line with ASNT TC-1A, NAS-410, or DOD guidance in one of the following methods: Eddy current (ET), radiography (RT), digital radiography (DR), dye penetrant (PT), visual inspection (VT), computed radiography (CR), phase array (PAUT), ultrasonic (UT), ultrasonic shear wave (UTSW), or magnetic particle (MT). Nondestructive Evaluation Level II certification in line with ASNT TC-1A, NAS-410, or DOD guidance in one of the following methods: eddy current (ET), radiography (RT), digital radiography (DR), dye penetrant (PT), visual inspection (VT), computed radiography (CR), phase array (PAUT), ultrasonic (UT), ultrasonic shear wave (UTSW), or magnetic particle (MT).
NewAviation Safety Inspector (Dispatch) U.S. Department of TransportationAviation Safety Inspector (Dispatch)Washington, DC$90,925–$118,204 / yearThe Aviation Safety Inspector (Dispatch) is assigned to Air Carrier Safety Assurance (ACSA) and interfaces among assigned air carriers, course operators, designated aircraft dispatcher examiners (DADE), and the Federal Aviation Administration (FAA). The minimum medical requirements include the following: Have good distant vision in each eye and be able to read, without strain, printed materials the size of typewritten characters (glasses and contact lenses permitted); Have the ability to hear the conversational voice (hearing aid permitted); and.
PUBLIC NOTICE - Aviation Safety Inspector (Aircraft Dispatch) U.S. Department of TransportationPUBLIC NOTICE - Aviation Safety Inspector (Aircraft Dispatch)Washington, DCAt least two years of experience as a part 121 scheduled domestic and/or scheduled international (flag) dispatcher, and at least one year of experience in at least one of the following positions: Air Transportation Supervisor (ATS); Designated Aircraft Dispatcher Examiner (DADE); An Aircraft Dispatcher with primary responsibility for developing, creating, and/or revising dispatch manuals and procedures which require a comprehensive knowledge of FAA regulatory requirements and current FAA policy for a Part 121 Air Carrier; or. The Aviation Safety Inspector (Aircraft Dispatch) serves at the certificated dispatch/operational control expert technical authority to interface between assigned air carriers/course operators/designated aircraft dispatcher examiners (DADE) and the FAA.
Lead Fire Protection Inspector-DIRECT HIRE AUTHORITY United States Air ForceLead Fire Protection Inspector-DIRECT HIRE AUTHORITYWashington, DC$69,905–$90,882 / yearHazards include: Burns, dehydration, and other effects of heat, smoke inhalation, falling materials, or explosions; Exposure to toxic materials and chemical, biological, radiological, nuclear, and explosive agents; Physical injury and sensory damage from firefighting activities and noise levels; Dealing with victims in varying stages of fright, panic and injury; Operating or riding on fire truck under adverse conditions or flying in aircraft to reach crash sites of fires in outlying areas. The incumbent of this position must be certified by the DoD Fire and Emergency Services Fire Fighter Certification system as Fire Officer II, Fire Instructor II, Fire Inspector II, HAZMAT Incident Commander, and Incident Safety Officer NOTE: The following certifications are also required if a Lead Fire Protection Inspector is utilized to fill in or support a firefighting operations position- DoD Hazmat Technician, (includes Hazmat Operation), and Firefighter I, II.
Senior Wastewater Inspector PL ASSOCIATES INC. (PLA)Senior Wastewater InspectorWASHINGTON, DCFull timeTwo (2) years of wastewater systems installation and maintenance experience, including at least one (1) year at a level equivalent to Water & Sewer Maintenance Worker II. The Senior Wastewater Inspection position is responsible for providing Quality Assurance and inspecting the Contractor’s work and ensuring that the work is in accordance with the Project specifications and drawings.
Sewer/Water Line Inspector / Construction Manager PL ASSOCIATES INC. (PLA)Sewer/Water Line Inspector / Construction ManagerEdgewood, MDFull timeTwo (2) years of wastewater systems installation and maintenance experience, including at least one (1) year at a level equivalent to Water & Sewer Maintenance Worker II. The Sewer Inspection I position is responsible for providing Quality Assurance and inspecting the Contractor’s work and ensuring that the work is in accordance with the Project specifications and drawings.
MEP Inspector - Federal Sector Procon ConsultingMEP Inspector - Federal SectorWashington, DCThe ideal candidate will bring extensive construction inspection experience, strong knowledge of industry practices and applicable codes, and the ability to effectively coordinate with project teams while maintaining accurate inspection records. Procon is seeking an experienced MEP Inspector to support the field inspection of complex Mechanical, Electrical, and Plumbing (MEP) construction and renovation projects.
Surveillance Inspector United States ArmySurveillance InspectorWashington, DC$33.93–$39.53 / hourFor each relevant work experience, make sure you include the employers name, job title, start and end dates (include month and year), for qualifications purposes, the number of hours worked per week, and a brief description that show you can perform the tasks at the required level listed in the job announcement. Conduct technical inspections, operations and activities in the receipt, shipment, handling, inspection, storage, safety, and logistics functions involving conventional ammunition items, large/small rockets and guided missiles used and stored.
Construction Inspector - Welding/Coating Accura EngineeringConstruction Inspector - Welding/CoatingBaltimore, MarylandJob Title: Construction Inspector- Welding/Coating ***Work Location: Pittsburg, PA*** Salary: Based on experience and will be discussed with manager in interview REQUIREMENT- Must be a US Citizen and must pass a federal background review and drug screen Duties/Responsibilities Observe, inspect, and provide reports on construction projects at federal facilities for compliance with plans and specifications in regard to workmanship, materials, installation, and construction methods. Coating inspection and must have NACE Level I or higher or SSPC Protective Coatings Inspector Level 1 or higher and shall have received formal training in coating inspections and testing of various coating systems and methods of application.
Elevator Inspector Alutiiq LLCElevator InspectorArlington, VAA professional, experienced vertical transportation inspector to provide detailed code compliance safety inspections and oversight of required testing for vertical transportation equipment operating in the Department of State diplomatic facilities abroad. b) Travel globally to conduct periodic elevator safety inspections and witness safety testing ensuring compliance with 15 FAM 660, OBO-Elevator Management (OBO-EM) directives and applicable safety codes.
Supervisory Aviation Safety & Compliance Inspector (Branch Chief for Fixed-Wing Standards) U.S. Department of the InteriorSupervisory Aviation Safety & Compliance Inspector (Branch Chief for Fixed-Wing Standards)Washington, DC$145,052–$197,200 / yearSpecialized experience includes documented experience instructing and evaluating airplane pilots; serving as a consultant and/or subject matter expert for the use of aviation in the natural resource environment; providing technical guidance or advice to management in the development and implementation of a wide range of aviation management issues related to safety, operational practices, policy and procedures development, and contract modifications; serving as an approved interagency fixed-wing pilot inspector and/or interagency qualified mission pilot with natural resource experience; preparing, reviewing, and interpreting technical stipulations for contracts to ensure compliance with a variety of aviation service contracts. Required documentation includes: First and last SF-50 (Notification of Personnel Action) for each appointment verifying the Position Occupied code (block 34, code 1-Competitive Service), AND Documentation of satisfactory performance for each appointment, such as, performance evaluations, memorandum of record, whereas the supervisor(s) documented an acceptable performance level for a specified rating/employment period.
Lead Traction Electrification System (TES) Inspector Purple Line Transit OperatorsLead Traction Electrification System (TES) InspectorLandover Hills, MarylandUnder the supervision of the Traction Power Supervisor, the Lead Traction Electrification System (TES) Inspector is responsible for leading, coordinating, and participating in the inspection, testing, maintenance, troubleshooting, repair, and restoration of the company’s Traction Electrification System (TES), including the overhead catenary system (OCS), traction power substations, switching stations, power distribution equipment, grounding systems, and associated electrical infrastructure. Performs inspections, testing, troubleshooting, maintenance, and repairs of overhead catenary systems (OCS), contact wire, messenger wire, support assemblies, poles, cantilevers, insulators, feeders, disconnect switches, and related equipment.
NDE Inspector (Starship) SpaceXNDE Inspector (Starship)Westminster, MD$25–$33.50 / hourAdditional nondestructive evaluation Level II OR III certifications in line with ASNT TC-1A, NAS-410, or DOD guidance in one of the following methods: Eddy current (ET), radiography (RT), digital radiography (DR), dye penetrant (PT), visual inspection (VT), computed radiography (CR), phase array (PAUT), ultrasonic (UT), ultrasonic shear wave (UTSW), or magnetic particle (MT). Nondestructive Evaluation Level II certification in line with ASNT TC-1A, NAS-410, or DOD guidance in one of the following methods: eddy current (ET), radiography (RT), digital radiography (DR), dye penetrant (PT), visual inspection (VT), computed radiography (CR), phase array (PAUT), ultrasonic (UT), ultrasonic shear wave (UTSW), or magnetic particle (MT).
Electrical Construction Inspector DM EnterprisesElectrical Construction InspectorBaltimore, MDFull timeDME is currently seeking an experienced Electrical Construction Inspector with expertise in the inspection of the construction of new/repair/renovate electrical systems including Switchgears, Lighting, Motor Control Center (MCC), Power Distribution, Substation, Fire Alaram Control Panel, wiring and verification if existing conditions to support our construction management and inspection services related to Infrastructure projects. Ability to provide input and feedback to others in the field such as subcontractors and work colleagues to constantly complete tasks safely, efficiently, and accurately according to specifications.
Medical Facilities Inspector Commonwealth of VirginiaMedical Facilities InspectorArlington, VA$75,000–$89,250 / yearYour work will include reviewing medical records, care plans, staffing documentation, medication administration practices, facility policies, and operational systems; interviewing residents, family members, and facility staff; and observing resident care, dining services, infection-control practices, and overall facility operations. You will identify deficient practices, determine the appropriate scope and severity, prepare clear and legally defensible Statements of Deficiencies, review plans of correction, participate in revisit surveys and monitoring activities, and collaborate with an interdisciplinary team of healthcare and regulatory professionals.
Lead Inspector WSP Global IncLead InspectorColumbia, MD$124,000–$135,000 / yearThe Project will divert storm water intercepted through drop shafts at the tunnel launch site in the west end of Ellicott City, as well as Parking Lot F, and convey storm water directly out to the Patapsco River through approximately 5800Lf long 18ft diameter tunnel. WSP USA is providing the compensation range that the company in good faith believes it might pay and offer for this position, based on the successful applicant's education, experience, knowledge, skills, abilities in addition to internal equity and specific geographic location.
Maryland State Inspector - $7,500 Bonus CarvanaMaryland State Inspector - $7,500 BonusBaltimore, MD$30–$35 / hourWe’re looking for Automotive Mechanics with a minimum of 6 months of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500.As a State Inspector, you’ll be expected to perform light maintenance, fluid checks, and/or conduct quality inspections on our vehicles to look for any imperfections or repairs that may be needed throughout the post-production process. We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you’ll be doing to help us get our low-mileage, late-model cars ready for our customers: Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process.