LEAD ENGINEER - PRINCIPAL ENGINEER - Laser Development Engineer - Boulder, CO Southwest Research InstituteLEAD ENGINEER - PRINCIPAL ENGINEER - Laser Development Engineer - Boulder, COBoulder, COThis includes operating, maintaining, and aligning high power lasers including diode fiber lasers, YAG lasers, OPO lasers, TiS lasers, fs-lasers, and optical/laser design. 7+ years: Laser operation and engineering for one or more of the following: diode lasers, external cavity lasers, laser optical systems and components, laser spectrometers, laser diffraction and vis/NIR detectors.
SR. TECHNICIAN - TECHNICIAN - Space Technologies - Boulder, CO Southwest Research Institute - HourlySR. TECHNICIAN - TECHNICIAN - Space Technologies - Boulder, COBoulder, CO$17.56 / hourFull timeSupport Engineering staff by assisting with coordinating labs with building facilities and staff to support maintenance, upgrades, equipment delivery, etc with all relevant parties. Daily and Monthly Responsibilities: Maintain and calibrate laboratory space and laboratory equipment, including the purchase of lab consumables and tools and ensure safety of the laboratories.
LEAD ENGINEER - PRINCIPAL ENGINEER - Laser Development Engineer - Boulder, CO Southwest Research Institute - FulltimeLEAD ENGINEER - PRINCIPAL ENGINEER - Laser Development Engineer - Boulder, COBoulder, CO$117,894 / yearFull timeThis includes operating, maintaining, and aligning high power lasers including diode fiber lasers, YAG lasers, OPO lasers, TiS lasers, fs-lasers, and optical/laser design. 7+ years: Laser operation and engineering for one or more of the following: diode lasers, external cavity lasers, laser optical systems and components, laser spectrometers, laser diffraction and vis/NIR detectors.
Avionics Technician I / II / III Pilatus Aircraft LtdAvionics Technician I / II / IIIBroomfield, CO$27.95–$48.91 / hourResponsibility for inspection, troubleshooting, repair, installation, and testing of avionics and electrical systems on Pilatus PC-12 and PC-24 aircraft in accordance with FAA regulations, manufacturer specifications, and approved maintenance procedures. Avionics Technician II: 2-5 years of experience independently performing avionics troubleshooting, diagnostics, and repair activities; experience supporting junior technicians preferred.
AVIONICS TECHNICIAN - FT Cutter Holding Co.AVIONICS TECHNICIAN - FTEnglewood, COAssure that all safety precautions are taken and that available protection devices are properly used at all times when applicable to the tasks performed, in order to reduce the risk of possible injury and health problems resulting from performing assigned tasks. KEY DUTIES & RESPONSIBILITIES: Ensure that all repairs are accomplished by approved methods and techniques and in accordance with the specifications set forth by the manufacturer in the service manuals, the Federal Aviation Regulations, service bulletins, and airworthiness directives and other data approved by the FAA administrator.
Avionics Technician II ProtingentAvionics Technician IIWestminster, CO$25–$32 / hourApply 5S, FOD, and ESD awareness in your daily tasks, collaborate with team members to ensure high-quality workmanship and adherence to project timelines, and document and report any issues or discrepancies found during inspections and tests. About Protingent: Protingent is an Award-Winning provider of top-tier Engineering and IT talent, trusted by companies at the forefront of innovation — from Software and Aerospace to AI, Clean Tech, Medical Devices, and Connected Technologies.
NewAvionics Technician IV (Harness Lab) Sierra SpaceAvionics Technician IV (Harness Lab)Broomfield, CO$32.55–$44.77 / hourAdditionally, you will collaborate with team members to ensure high-quality workmanship and adherence to project timelines, document and report any issues or discrepancies found during inspections and tests, and provide input to Test Engineers for test setup and test procedures. Adhering to general best shop practices, including PPE and shop safety requirements, you will demonstrate correct packaging and handling requirements for all hardware and apply advanced 5S, FOD, and ESD awareness in your daily tasks.
NewAvionics Technician III Sierra SpaceAvionics Technician IIIEnglewood, CO$29.46–$40.52 / hourAdditionally, you will apply 5S, FOD, and ESD awareness in your daily tasks, collaborate with team members to ensure high-quality workmanship and adherence to project timelines, and document and report any issues or discrepancies found during inspections and tests. The Avionics Technician III is responsible for installing, inspecting, testing, adjusting, and repairing avionics equipment and systems for our aerospace vehicles.
Avionics Technician - Line United Airlines IncAvionics Technician - LineDenver, COAn Avionics Technician is a specialized professional within the aviation maintenance field responsible for inspecting, installing, testing, troubleshooting, and repairing the electronic systems that support an aircraft's operation, communication, navigation, and flight control. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network.
Avionics Technician $45 an hour with paid lodging Air AviationAvionics Technician $45 an hour with paid lodgingEnglewood, ColoradoAir Aviation LLC is seeking experienced Avionics Technicians to support an Airbus H125 aircraft program in Englewood, Colorado. Submit an updated resume that includes your avionics experience, rotorcraft experience, current location, availability, and earliest possible start date.
Avionics Technician III (Flight Harness) Sierra Space CorporationAvionics Technician III (Flight Harness)Broomfield, CO$29.59–$37 / hourAdditionally, you will collaborate with team members to ensure high-quality workmanship and adherence to project timelines, document and report any issues or discrepancies found during inspections and tests, and provide input to Test Engineers for test setup and test procedures. Adhering to general best shop practices, including PPE and shop safety requirements, you will demonstrate correct packaging and handling requirements for all hardware and apply advanced 5S, FOD, and ESD awareness in your daily tasks.
Avionics Technician I Sierra Space CorporationAvionics Technician IBroomfield, CO$22.74–$31.28 / hourIMPORTANT NOTICE: To conform to U.S. Government international trade regulations, applicant must be a U.S. Citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State or U.S. Department of Commerce. Any unsolicited resumes submitted to our website or to Sierra Space team members not through our approved vendor list or Talent Acquisition will be considered property of Sierra Space, and we will not be obligated to pay any referral fees.
Avionics Technician III Sierra Space CorporationAvionics Technician IIIEnglewood, CO$29.46–$40.52 / hourAdditionally, you will apply 5S, FOD, and ESD awareness in your daily tasks, collaborate with team members to ensure high-quality workmanship and adherence to project timelines, and document and report any issues or discrepancies found during inspections and tests. The Avionics Technician III is responsible for installing, inspecting, testing, adjusting, and repairing avionics equipment and systems for our aerospace vehicles.
Avionics Technician Ill BelcanAvionics Technician IllEnglewood, COJob Title: Avionics Technician lllLocation: Englewood, CO - **$1000 relocation bonus available**Zip Code: 80112Duration: 12 MonthsPay Rate: $40/hrKeyword's: #Englewoodjobs; #Avionicsjobs. Start Date: Immediate*Must be able to obtain a Secret Clearance*Job Description:As an Avionics Technician III, you will be using your skills and expertise to perform avionics maintenance according to FCC, FAA and company policies and regulations.
Avionics Technician III BelcanAvionics Technician IIIEnglewood, COAbility to understand and interpret basic applicable technical schematics, diagrams, blueprints, manuals, and/or publications.*Ability to route wires per technical drawings.*Advanced skills with avionics installation tooling, wiring, wiring repair, wiring installation, soldering, and crimping techniques. Keyword's: #englewoodjobs; #AvionicstechnicianStart Date: Immediate*Must be able to obtain a Secret Clearance*Job Description:As an Avionics Technician III, you will be using your skills and expertise to perform avionics maintenance according to FCC, FAA and company policies and regulations.
Lead Avionics Aviation Maintenance Technician 145 Air MethodsLead Avionics Aviation Maintenance Technician 145Englewood, ColoradoFull timeHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. • Proficient in avionics systems to include but not limited to Comm, Nav, Audio, Marker Beacon, Autopilot, Garmin 430, 530, G1000, G500, GTN 650/750, Satellite Phone and Tracking, TCAS, and lighting systems.
Avionics and Payload Assembly Technician Urban SkyAvionics and Payload Assembly TechnicianDenver, ColoradoAs a Payload & Avionics Assembly Technician at Urban Sky, you will be responsible for the manufacture and refurbishment of payload and avionics systems at our Denver, CO headquarters. You'll work with our Lead Technician and hardware engineering team to assemble both production and R&D systems for regular flight operations.
Avionics Technician III Sierra Nevada CorpAvionics Technician IIICentennial, CO$33.38–$45.90 / hourThe ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support.
Lead Avionics Aviation Maintenance Technician 145 Air Methods CorpLead Avionics Aviation Maintenance Technician 145Englewood, COHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Proficient in avionics systems to include but not limited to Comm, Nav, Audio, Marker Beacon, Autopilot, Garmin 430, 530, G1000, G500, GTN 650/750, Satellite Phone and Tracking, TCAS, and lighting systems.
Avionics Instrument Technician Columbia HelicoptersAvionics Instrument TechnicianAurora, ColoradoHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Monitors and supports continuous improvement activities by utilizing Lean and continuous improvement tools striving to identify and eliminate waste in all its forms in an effort to improve quality and safety, decrease lead time and reduce cost.