Senior Product Engineer, Post Processing - Aerospace & Defense VulcanFormsSenior Product Engineer, Post Processing - Aerospace & DefenseDevensDesign, develop, and implement fixtures and work-holding for process and part-handling steps such as depowdering, EDM, heat treatment, support removal, machining, assembly, cleaning, marking, and finishing -including prototype fixtures, whose manufacture you will oversee. You will define the processes, procedures, work instructions, and systems that produce our components and sub-assemblies to customer specification, drawing on product design, fabrication, assembly, work-holding, cutting tools, and materials expertise.
NewResearch Manufacturing Engineer II Boston Children's HospitalResearch Manufacturing Engineer IIBoston, MA$62,212.80–$99,528 / yearPrimary responsibilities include driving improvements to the CORT QMS, overseeing and ensuring compliance with the CAPA, NC and Quality Planning processes, and providing experienced quality assurance support to manufacturing and product development teams. Drive continuous improvement initiatives using quality tools and methodologies such as Lean, Six Sigma, Poka-Yoke, and data analysis, while supporting special projects and inventory-related quality activities.
NewBioinstrumentation Support Engineer Spear BioBioinstrumentation Support EngineerWoburn, MassachusettsDevelop working proficiency in SPEAR assay workflows (sample preparation, plate setup, qPCR readout, SPEARview data analysis) sufficient to troubleshoot workflow failures at customer sites and distinguish instrument issues from assay/reagent issues. Because this role is tightly aligned with engineering, you will be expected to go deeper than a traditional FSE—diagnosing root causes across hardware, software, and assay workflows—and bringing that knowledge directly to customers and back to the team.
Principal Microfluidics Engineer The Charles Stark Draper LaboratoryPrincipal Microfluidics EngineerCambridge, MassachusettsAt Draper Bioengineering, we work at the interface between engineering and biology, and the successful applicant will join teams working on Microphysiological systems (organ-on-chip) and other novel systems that blend complex biology with custom hardware and software. Draper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities.
Senior Machine Learning Research Engineer (Deep Learning, Sensor Intelligence Group) WhoopSenior Machine Learning Research Engineer (Deep Learning, Sensor Intelligence Group)Boston, MassachusettsYou will tackle the complex challenge of extracting reliable insights from noisy sensor data and deploying robust algorithms on constrained edge and cloud environments, ultimately delivering meaningful and personalized metrics to millions of members. At WHOOP, we view total compensation as the combination of base salary, equity, and benefits, with equity serving as a key differentiator that aligns our employees with the long-term success of the company and allows every member of our corporate team to own part of WHOOP and share in the company’s long-term growth and success.
Sensor Intelligence Engineer II (Advanced Development) WhoopSensor Intelligence Engineer II (Advanced Development)Boston, MASuccess in this role will require a deep understanding of physical sensing mechanisms, for example electrical, optical, or thermal, and development of the signal processing and algorithms needed to translate raw data into actionable feedback. WHOOP is looking for an Engineer II to join the Sensor Intelligence Group (SIG), a cross-functional team collaborating across Hardware, Firmware, and Data Science.
Engineer I, Process Development, Pilot Scale Operations ModernaTXEngineer I, Process Development, Pilot Scale OperationsNorwood, MassachusettsWe are proud to have been recognized as a Science Magazine Top Biopharma Employer, a Fast Company Best Workplace for Innovators, and a Great Place to Work in the U.S. If you want to make a difference and join a team that is changing the future of medicine, we invite you to visit modernatx.com/careers to learn more about our current opportunities. Qualified candidates will have relevant academic or industry experience in solution preparation, RNA processing, sterile fill/finish and/or tangential flow filtration experience, and an understanding of scaling and technology transfer of these unit operations.
Principal Engineer, CMC Development Pilot Operations ModernaTXPrincipal Engineer, CMC Development Pilot OperationsNorwood, MassachusettsThe Principal Engineer will partner closely with CMC Dev Quality, analytical testing laboratories, Process Development, Engineering, Safety, Digital, and the GMP manufacturing facility to ensure seamless material delivery, technical readiness, operational excellence, and robust transfer of product and process knowledge across the manufacturing network. We are proud to have been recognized as a Science Magazine Top Biopharma Employer, a Fast Company Best Workplace for Innovators, and a Great Place to Work in the U.S. If you want to make a difference and join a team that is changing the future of medicine, we invite you to visit modernatx.com/careers to learn more about our current opportunities.
Engineer II, Process Engineering, Filling Operations ModernaTXEngineer II, Process Engineering, Filling OperationsNorwood, MassachusettsWe are proud to have been recognized as a Science Magazine Top Biopharma Employer, a Fast Company Best Workplace for Innovators, and a Great Place to Work in the U.S. If you want to make a difference and join a team that is changing the future of medicine, we invite you to visit modernatx.com/careers to learn more about our current opportunities. Working closely with Manufacturing, Quality, MS&T, Validation, Automation, and Facilities, you will troubleshoot equipment issues, support investigations, execute continuous improvement initiatives, and participate in equipment qualification and lifecycle management within a GMP environment.
Sr. Systems Engineer Biomedical SearchSr. Systems EngineerBillerica, MAWe are seeking a Senior Systems Engineer to lead product development from concept through commercialization, driving system design, design controls, risk management, and verification & validation (V&V) in a collaborative, cross-functional environment. Bachelor's degree in Mechanical, Electrical, Biomedical, Software Engineering, or a related field (Master's preferred).
Regional Lead Quality Engineer CSL Behring LLCRegional Lead Quality EngineerWaltham, MA$143,000–$169,000 / yearThe Medical Device and Packaging QA Staff (Advisor) should have minimum 2 years practical experience in medical devices R&D Quality: design controls, new product development life cycle, requirement specifications, risk management (including FMEA), validation / verification (V&V), usability / human factor studies, DHFs, design transfer. This role assures product development and site level execution of the local CP/MD Quality System for combination products to govern quality related business processes throughout the entire combination product lifecycle, with emphasis on the new product development activities.
Senior UVM Digital Verification Engineer The Charles Stark Draper LaboratorySenior UVM Digital Verification EngineerCambridge, MassachusettsDraper supports many programs to improve work-life balance including workplace flexibility, employee clubs ranging from photography to yoga, health and finance workshops, off site social events and discounts to local museums and cultural activities. • Ability to present results that support system-level analysis, performance trade-offs, and decision-making is critical, thus communications and interpersonal skills are highly valued in this role.
NewPackaging/Medical Device Quality Engineer CSL PlasmaPackaging/Medical Device Quality EngineerWaltham, MassachusettsAs a part of the Quality for Combination Products and Medical Devices (CP/MD QA) department, the Combination Product and Medical Device and Packaging QA Associate will represent Quality in global teams involved in design, development, manufacture and regulatory approval of CSL combination products, which include medical device constituent parts developed to enable convenience, monitoring, compliance and effective outcomes for the lives of our patients. The Medical Device and Packaging QA Staff (Advisor) should have minimum 2 years practical experience in medical devices R&D Quality: design controls, new product development life cycle, requirement specifications, risk management (including FMEA), validation/verification (V&V), usability / human factor studies, DHFs, design transfer.
Senior Project Engineer, Sustaining Engineering TransMedicsSenior Project Engineer, Sustaining EngineeringAndover, MassachusettsTo accomplish this mission, we partner closely with transplant stakeholders worldwide and help expand their access to healthy donor organs, while delivering the highest quality technology, service, clinical care and outcomes. The Senior Project Engineer will lead the design, development, and implementation of complex medical devices, including capital equipment, disposables, and software-enabled systems for use in organ transportation and preservation.
Senior Project Engineer, Sustaining Engineering TransMedics Group, Inc.Senior Project Engineer, Sustaining EngineeringAndover, MA$132,100–$164,850 / yearTo accomplish this mission, we partner closely with transplant stakeholders worldwide and help expand their access to healthy donor organs, while delivering the highest quality technology, service, clinical care and outcomes. The Senior Project Engineer will lead the design, development, and implementation of complex medical devices, including capital equipment, disposables, and software-enabled systems for use in organ transportation and preservation.
Sr. Fill Finish Process Engineer (Future Opportunities) Syner-GSr. Fill Finish Process Engineer (Future Opportunities)Boston, MassachusettsRemoteThe work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job, including moderate noise level, an indoor temperate environment, and light levels that are bright and conducive to minimal eye strain, typical for an office environment. Support FAT/SAT, commissioning, and qualification activities for fillers, isolators or RABS, lyophilizers, depyrogenation tunnels, autoclaves, CIP/SIP systems, formulation vessels, sterile filtration skids, and inspection machines.
Senior Field Service Engineer - Greater Boston, MA DanaherSenior Field Service Engineer - Greater Boston, MABoston, MassachusettsRemoteAt Beckman Coulter Life Sciences, we know time is the most critical facet in the laboratory today: time to get life-saving therapies to patients faster; reclaiming time by automating tedious manual workflows; and saving time spent addressing erroneous or complex results. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company’s sole discretion, consistent with the law.
Principal Systems Engineer Kforce Inc.Principal Systems EngineerChelmsford, MA$100–$120Kforce has a client in Irvine, CA that is seeking a highly experienced, cross-functional Principal Systems Engineer to drive the system-level architecture, design, and implementation of complex medical devices including defibrillators, patient monitors, and ventilation systems. The ideal candidate brings deep experience with multiprocessor-based medical systems, embedded real-time software, biomedical signal acquisition, power systems, wireless communications, and electronics packaging.
NewRegional Lead Quality Engineer CSL PlasmaRegional Lead Quality EngineerWaltham, MassachusettsThe Medical Device and Packaging QA Staff (Advisor) should have minimum 2 years practical experience in medical devices R&D Quality: design controls, new product development life cycle, requirement specifications, risk management (including FMEA), validation / verification (V&V), usability / human factor studies, DHFs, design transfer. This role assures product development and site level execution of the local CP/MD Quality System for combination products to govern quality related business processes throughout the entire combination product lifecycle, with emphasis on the new product development activities.
NewField Service Engineer II Bio-Rad Laboratories, Inc.Field Service Engineer IIMassachusetts$80,600–$110,800 / yearAt least 1 - 3 years of transferable field service experience servicing electro-mechanical/electronic/optical/robotics equipment and an A.S. or B.S. in Electronics, Biomedical Engineering, or Mechanical Engineering (or a related field or military equivalent experience). Whether a routine maintenance call or troubleshooting a problem and finding solutions, as our Field Service Engineer, you will play a leading role in supporting the onsite technical needs of Bio-Rad customers.