Bus Drill Coordinator Transdev North America IncBus Drill CoordinatorMAConducts school bus evacuation drills at each school location in accordance with Massachusetts law, including educating students, staff, faculty, support personnel, school bus drivers, and other relevant personnel. The Bus Drill Coordinator is responsible for ensuring that Transdev Services, Inc., and Boston Public Schools Department of Transportation are compliant with state requirements for school bus evacuation drills.
Heavy Equipment Operator/Driller Trainee (Construction) Maine Drilling & BlastingHeavy Equipment Operator/Driller Trainee (Construction)Manchester, New HampshireHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Understand the Field Accounting system and accurately complete and submit timely paperwork: drill reports, hole sheets, and a signed timecard.
Heavy Equipment Operator/Driller Trainee (Quarry) Maine Drilling & BlastingHeavy Equipment Operator/Driller Trainee (Quarry)Milford, MassachusettsHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Understand the Field Accounting system and accurately complete and submit timely paperwork: drill reports, hole sheets, and a signed timecard.
Laborer (Construction) Maine Drilling & BlastingLaborer (Construction)Manchester, New HampshireDo you want to learn the drilling and blasting industry with a stable, growing, majority employee-owned company? Ability to quickly learn safety aspects of working construction sites and working around explosives.
NewLaborer (Quarry) Maine Drilling & BlastingLaborer (Quarry)Milford, MassachusettsDo you want to learn the drilling and blasting industry with a stable, growing, majority employee-owned company? Ability to quickly learn safety aspects of working construction sites and working around explosives.
Environmental Analyst II Commonwealth of MassachusettsEnvironmental Analyst IIWoburn, MAEnvironmental Analyst II'',''Environmental Analyst II'',''United States-Massachusetts-Woburn-150 Presidential Way'',''United States-Massachusetts-Woburn-150 Presidential Way'',''Science'',''Science'',''Department of Environmental Protection'',''Department of Environmental Protection'',''Full-time'',''Full-time'',''Day'',''Day'',''Jun 29, 2026, 10:44:37 AM'',''Jun 29, 2026, 10:44:37 AM'',''1'',''1'',''105,834.82'',''72,240.22'',''105,834.82'',''Yearly'',''Chris Mendez / EEADiversity@mass.gov'',''Chris MINIMUM ENTRANCE REQUIREMENTS: Applicants must have at least (A) three years of full-time, or equivalent part-time, technical or professional experience in the field of environmental science, biology, chemistry, earth science, environmental health, meteorology, natural science, toxicology or public health, of which (B) at least one year must have been in a professional capacity, or (C) any equivalent combination of the required experience and the following substitutions.
Telecommunications Equipment Installer IV Adex CorporationTelecommunications Equipment Installer IVBoston, MAOther duties may be assigned: Physically place, remove, or modify working and non-working equipment including the following: Install superstructure components in support of cabling systems such as auxiliary bars, threaded rods, cable racking, cable trays, wire basket systems, etc. This lead role will provide high-quality service in customer technical spaces including data centers, mobile telephone switch centers, central office wire centers, and designated enterprise spaces.
NewField Engineer Stantec Consulting InternationalField EngineerBoston, MA$97,400–$141,200 / yearPay Range:Locations in MN, OH, VT, & Various CA, NY Areas - $77,300.00 to $112,100.00 annuallyLocations in CO, HI, IL, MD & Various CA, NJ Areas - $85,000.00 to $123,300.00 annuallyLocations in WA, DC & Various CA, MA areas - $91,200.00 to $132,300.00 annuallyLocations in NYC & CA (Bay Area) & NJ (RP)- $97,400.00 to $141,200.00 annuallyPay Transparency: In compliance with pay transparency laws, pay ranges are provided for positions in locations where required. Provide field engineering services to include inspection of steel reinforcing and casing elements prior to construction; observation of all aspects of drilling operations; communicate with geotechnical engineering team for rock socket inspections and/or be able to stand in for inspections; down hole inspection; and testing prior to acceptance.
NewRoad Saw Operator Riley Brother IncRoad Saw OperatorStoughton, MAPart timeWe provide a full suite of engineering, construction, operations, and maintenance services, including repair, replacement, maintenance, and installation of natural gas, telecommunications, and electric infrastructure through our operating subsidiaries: SiteWise, Kelly Cable, Riley Brothers, 5 Star Electric, Superior Hydrovac and Superior Pipeline Services. Saw Cutters work under the direction of utility reconstruction performing physical activities in core drilling, concrete sawing, cutting and/or removal.
NewHeavy Equipment Mechanic Maine Drilling & BlastingHeavy Equipment MechanicWorcester, MassachusettsThat means that you will be expected to: Replace and repair broken equipment; Perform PM on equipment; Trouble shoot mechanical equipment and systems such as motors, hydraulic, pneumatic, and electrical components; Follow all Company safety policies and procedures; Perform field services and repairs on various equipment; Coordinate with Equipment Manager on needed parts & supplies necessary to repair and rebuild items; Use and operate all hand and power tools in a safe and effective manner; View safety as paramount and pro-actively identify safety hazards; Complete accurate required maintenance documents and records; Participate in Equipment Manager meetings as needed; Other duties as assigned. In order to join our team, here’s what we will need from you: Must have own hand tools up to 1 5/8 or be willing to invest in tools as needed; Must have good driving record; Must be able to obtain DOT Medical Card; Ability to pass ATF screenings; Ability to perform all essential functions of the position; Physical ability to lift 50 - 100 lbs., 30 - 40% of the time, with stooping and bending 30 - 40% of the time.
NewRoad Saw Operator Peak Utility Services GroupRoad Saw OperatorStoughton, MassachusettsWe provide a full suite of engineering, construction, operations, and maintenance services, including repair, replacement, maintenance, and installation of natural gas, telecommunications, and electric infrastructure through our operating subsidiaries: SiteWise, Kelly Cable, Riley Brothers, 5 Star Electric, Superior Hydrovac and Superior Pipeline Services. Saw Cutters work under the direction of utility reconstruction performing physical activities in core drilling, concrete sawing, cutting and/or removal.
Field Engineer (Foundation Services) Maine Drilling & BlastingField Engineer (Foundation Services)Boston, MassachusettsSpend time on job sites learning the basics of operations including hands on experience performing load tests on rock anchors, soil nails, tiebacks, and micropiles. Frequent travel throughout our operating region (Maine, New Hampshire, Vermont, Massachusetts, Connecticut, Rhode Island, New York & New Jersey).
Machinist LancesoftMachinistWilmington, MA$45Pinning - Ability to drill and ream pilot hole to tight tolerances (.0001”to .0003”) using portable drill set-ups Create slip/sliding fits using provided precision dowel pins. Job Responsibilities:Skilled Manual Machinist with High tolerance precision machining - able to work with bridge ports with limited CNC, lathes, and other machines with limited CNC capability.
Traveling Driller Cascade Environmental LLCTraveling DrillerBoston, MA$25–$32 / hourRespiratory Protection will be required to be worn if specified by a site-specific Health and Safety Plan, or when air monitoring indicates potential for exposure levels to reach an established action, level, threshold limit value (TLV), or permissible exposure limit (PEL). Obtaining and maintaining an interstate DOT Medical Card and meeting all Federal Interstate FMCSA requirements to operate a Commercial Motor Vehicle.
Traveling Geoprobe Driller Cascade Environmental LLCTraveling Geoprobe DrillerMA$22–$24 / hourRespiratory Protection will be required to be worn if specified by a site-specific Health and Safety Plan, or when air monitoring indicates potential for exposure levels to reach an established action, level, threshold limit value (TLV), or permissible exposure limit (PEL). Obtaining and maintaining an interstate DOT Medical Card and meeting all Federal Interstate FMCSA requirements to operate a Commercial Motor Vehicle.
Mechanical Design Engineer Subject Matter Expert Lockheed Martin CorpMechanical Design Engineer Subject Matter ExpertMA$122,900–$216,660 / yearPay Rate: The annual base salary range for this position in California, Massachusetts, and New York (excluding most major metropolitan areas), Colorado, Hawaii, Illinois, Maryland, Minnesota, New Jersey, Vermont, Washington or Washington DC is $122,900 - $216,660. By applying extensive hands‑on machining experience and advanced engineering expertise, you will ensure that designs are cost‑effective, high‑quality, and suitable for high‑volume production while preserving performance and reliability.
Sr. Reporter Shale/A&D Crain Communications IncSr. Reporter Shale/A&DBoston, MA$80,000–$100,000 / yearThe successful candidate will become a trusted authority on U.S. shale and upstream dealmaking, consistently delivering exclusive reporting, insightful analysis, and indispensable intelligence that helps Hart Energy readers understand where capital is moving, which operators are gaining momentum, and how strategic decisions are reshaping the North American energy landscape. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information.
Sheet Metal Operator B- 3rd Shift RTX CorpSheet Metal Operator B- 3rd ShiftMAMachines, Tools, and Equipment used, includes but not limited to: Utilizes CNC and manually controlled equipment, sheet metal machinery such as manual and power-operated shears and brakes, punch presses, dies, arbor presses, drilling and tapping equipment, notchers, saws, sanders, grinders and buffing equipment, rivet-setting equipment, spotwelders, soldering equipment, vises, drills, reamers, counterbores, countersinks, fly cutters, rivet sets, punches and sheet metal hand tools, annealing and stress-relieving equipment, all hardware installation tools / equipment, precision inspection measuring equipment including CMM's and other equipment common to the trade. Set-up, lays out, fabricates, constructs and assembles a wide range of complex experimental, developmental and production sheet metal parts having complicated bends, many interrelated holes and close angular tolerances.
Sheet Metal Operator B- 1st Shift RTX CorpSheet Metal Operator B- 1st ShiftMAMachines, Tools, and Equipment used, includes but not limited to: Utilizes CNC and manually controlled equipment, sheet metal machinery such as manual and power-operated shears and brakes, punch presses, dies, arbor presses, drilling and tapping equipment, notchers, saws, sanders, grinders and buffing equipment, rivet-setting equipment, spotwelders, soldering equipment, vises, drills, reamers, counterbores, countersinks, fly cutters, rivet sets, punches and sheet metal hand tools, annealing and stress-relieving equipment, all hardware installation tools / equipment, precision inspection measuring equipment including CMM's and other equipment common to the trade. Set-up, lays out, fabricates, constructs and assembles a wide range of complex experimental, developmental and production sheet metal parts having complicated bends, many interrelated holes and close angular tolerances.
Sheet Metal B Operator- 2nd Shift RTX CorpSheet Metal B Operator- 2nd ShiftMAMachines, Tools, and Equipment used, includes but not limited to: Utilizes CNC and manually controlled equipment, sheet metal machinery such as manual and power-operated shears and brakes, punch presses, dies, arbor presses, drilling and tapping equipment, notchers, saws, sanders, grinders and buffing equipment, rivet-setting equipment, spotwelders, soldering equipment, vises, drills, reamers, counterbores, countersinks, fly cutters, rivet sets, punches and sheet metal hand tools, annealing and stress-relieving equipment, all hardware installation tools / equipment, precision inspection measuring equipment including CMM's and other equipment common to the trade. Set-up, lays out, fabricates, constructs and assembles a wide range of complex experimental, developmental and production sheet metal parts having complicated bends, many interrelated holes and close angular tolerances.
CNC Hardware Assembly Proto Labs IncCNC Hardware AssemblyNashua, NH$17.07–$21 / hourOccasionally works near moving mechanical parts and in high, precarious places and is occasionally exposed to wet and/or humid conditions, fumes or airborne particles, toxic or caustic chemicals, risk of electrical shock and vibration. Physical Demands: While performing the essential duties of this job, the employee is occasionally required to sit; use a computer keyboard, monitor and mouse, telephone and printer; reach with hands, and arms, talk, see and hear.
Electronics Technician I Automation Solutions IncElectronics Technician IFranklin Town, MA$21.29–$26.51 / hourPart timeComplete point-to-point wiring, and install a wide variety of electronic components including PLCs, relays, lights, switches, etc. Other personal protective equipment as required for drilling, tapping, deburring, cutting, testing, lifting, and moving equipment.
Principal / Senior Principal Remediation Engineer Geosyntec Consultants, Inc.Principal / Senior Principal Remediation EngineerActon, MassachusettsFull timeGeosyntec is an innovative, international engineering and consulting firm serving private and public-sector clients to address new ventures and complex problems involving our environment, natural resources, and civil infrastructure. At times, job may also include fieldwork including multi-media environmental sampling, sediment sampling and characterization, drilling oversight, contractor oversight, and remediation system operations, maintenance, and construction.
Concrete Cutting Operators All States Concrete CuttingConcrete Cutting OperatorsBoston, MA$30–$40 / hourAll States Concrete Cutting, a family-owned business serving South Dakota and the surrounding 5-state area since 1999, is looking for dedicated individuals to join our team! Now Hiring for Sioux Falls, South Dakota : Concrete Cutting Operators – Join Our Family at All States Concrete Cutting!
Special Education Analyst (SY25-26) Boston Public SchoolsSpecial Education Analyst (SY25-26)Roxbury, MAThe Special Education Analyst will focus specifically on performing data analyses that allow the Office of Data and Accountability (ODA) and Office of Specialized Services (OSS) to identify areas for systems improvement that will facilitate closing opportunity and achievement gaps for BPS students with disabilities. As a member of a highly collaborative group, and given the time-sensitive nature of many of these analyses, the Special Education Analyst can expect to rely on the experience of other analysts within the Office of Data and Accountability, and will be expected in turn to support the work of colleagues on related projects.
Electronics Technician I iAutomation CareersElectronics Technician IFranklin Town, MassachusettsComplete point-to-point wiring, and install a wide variety of electronic components including PLCs, relays, lights, switches, etc. Other personal protective equipment as required for drilling, tapping, deburring, cutting, testing, lifting, and moving equipment.
Construction Superintendent Trainee Maine Drilling & BlastingConstruction Superintendent TraineeMilford, MassachusettsOur CSTs join an internal Leadership Development Program aimed at building and developing a broad range of skills, knowledge, and experiences necessary to move into career paths toward future manager, supervisory, and leadership positions in support of the Company’s growth. This means travel within a multi-state area (don’t worry, your meals and hotels are covered); You will be learning our trade from the ground up, which means laboring, drilling, and blasting.