NewElectrical Superintendent Faith TechnologiesElectrical SuperintendentOpelika, ALAll job sites participate in daily safety initiatives such as tool-box talks and daily operational risk management meetings to proactively identify safe practices. Demonstrates successful and consistent usage of Faith internal resources to include, but not limited to Excellerate, Precon, APC, Productivity, Engineering, Estimating, etc.
Electrical Quality Control Supervisor Faith TechnologiesElectrical Quality Control SupervisorOpelika, ALThe Excellerate Quality Supervisor serves as the main quality customer interface and leads determination of non-conformance and customer complaints through containment, root cause, corrective action, and audits. Manages the Supplier Scorecard process utilizing quality metrics to support supplier rating and drive improvement to the Approved Supplier List.
Aviation Electronics, Electrical & Computer Systems Technician U.S. NavyAviation Electronics, Electrical & Computer Systems TechnicianSmiths Station, ALWork Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
Onsite Electrical Engineer Faith TechnologiesOnsite Electrical EngineerOpelika, AlabamaThe Electrical Engineer- Level 1 is responsible for performing basic electrical power, lighting, and/or low voltage system engineering tasks for electrical construction projects, under the direct supervision of an upper level Engineer, Senior Electrical Designer, or Engineering Team Leader as assigned by the Corporate Engineering Manager. The ideal candidate must be proficient in the use of a PC and Microsoft Office Suite, AutoCAD/Revit knowledge is required, knowledge of electrical terminology and symbols is required, and knowledge of the International Energy Conservation Code (IECC) is necessary.
Senior Electrical/Controls Engineer Johns ManvilleSenior Electrical/Controls EngineerPhenix City, KansasThis role will be responsible for developing, scoping, coordinating, justifying, implementing, and managing from start to finish a broad range of industrial electrical and control system manufacturing projects, including scope documents, engineering calculations and designs, specifications, cost estimates, schedules, project justifications, and project training and documentation for Johns Manville manufacturing facilities in North America. Must have the ability to work with and influence a multi-discipline team and management with a demonstrated capability to implement plans and follow through with sustained execution, meeting project milestones in a timely manner.
Electrical Field Engineer Artech LLCElectrical Field EngineerFort Benning, GA$55–$65 / hourResponsibility: This role will be responsible for field inspections, coordination with contractors and subcontractors, and resolving technical issues across new construction projects including barracks and a schoolhouse, as well as renovation work. The engineer will review drawings, track project progress, and support quality control and commissioning efforts to ensure timely and successful project delivery.
Electrical Maintenance Tech Electrical Automation ServicesElectrical Maintenance TechPhenix City, ALElectrical Maintenance Technician, Industrial Electrician, Electromechanical Technician, Maintenance Technician, PLC Technician, Controls Technician, Allen-Bradley PLC, Rockwell Automation, VFD Troubleshooting, Motor Controls, Instrumentation Technician, Automation Technician, Brewery Maintenance, Distillery Maintenance, Food Manufacturing Maintenance, Beverage Manufacturing Maintenance, Industrial Automation, Preventive Maintenance, Predictive Maintenance, SAP, CMMS, Electrical Troubleshooting, Reliability Maintenance. Troubleshoot and repair industrial electrical systems, control circuits, motors, motor controls, VFDs, PLCs, instrumentation, and automated production equipment.
Electrical Instructor with IEC Atlanta & Georgia Chapters LadderElectrical Instructor with IEC Atlanta & Georgia ChaptersColumbus, GAThe technical instructor uses multiple training techniques including presentation and lecture, hands on practice, partner member presentations, group presentations by students and other effective instructional methods in the Atlanta & Georgia Chapter Apprenticeship Training Program. This discipline helps students develop good study habits, ensures timely submission of assignments and reinforces good safety procedures while building the skills necessary to resolve disagreements with instructors, other students and coworkers in a diplomatic manner.
Combustion Turbine Technician (Electrical) Oglethorpe Power CorporationCombustion Turbine Technician (Electrical)Box Springs, GAFull timeDaily activities include start-up and shutdown of the plant equipment, operator rounds, oversee plant physical security, clearances, receiving materials/inventory, maintaining 3-part communications with GSOC, shift log communications, and issuing applicable Operational Advisory and Event Reports. The ability to provide technical direction and leadership to Assistant Combustion Turbine Technicians andcontractors brought in to augment the workforce in the performance of modifications and major repairs to The ability to perform predictive maintenance and interpret data on plant equipment performance.
Assistant Professor – Computer Engineering Auburn UniversityAssistant Professor – Computer EngineeringAuburn University, AL$100,000–$120,000 / yearFull timeWe seek candidates specializing in the core hardware areas of computer engineering and digital system design, including VLSI technology, computer aided design (CAD) of systems-on-chips, computer systems architecture, AI and machine learning hardware, and hardware security. Responsibilities: The individual selected for this position will be expected to contribute to the growth of the computer engineering program, develop and secure funding for a strong research program, collaborate with other faculty on interdisciplinary research projects, and teach courses in the computer engineering area.
TES Engineering Technician Auburn UniversityTES Engineering TechnicianAuburn University, AL$20–$25 / hourThe selected candidate will provide technical assistance with ongoing projects; examples include, but are not limited to, providing electrical and electronic support and performing maintenance and troubleshooting of equipment. Overview: The Department of Biosystems Engineering at Auburn University is seeking candidates for a TES Engineering Technician position.
College of Engineering Postdoc Pool 2026 Auburn UniversityCollege of Engineering Postdoc Pool 2026Auburn University, AL$45,000–$75,000 / yearFull timeWe are seeking applications from individuals with a PhD in any one area of engineering such as: aerospace, chemical, civil and environmental, computer science and software, electrical and computer, industrial and systems, and mechanical engineering at the time employment begins. Sweet Home Alabama: The Auburn/Opelika area offers southern charm, vibrant downtown scenes, top-ranked schools, and easy access to Atlanta, Birmingham, and the Gulf of Mexico beaches.
NewAutomation & Controls Engineer Macpower Digital Assets Edge Private LimitedAutomation & Controls EngineerPhenix City, AL$96,900–$133,000 / yearfacility swings between 24/5 to 24/7 with a variety of occasional alternate schedules to satisfy our customer's needs; we are a manufacturer of a number of mineral wool insulation products including industrial boards of various densities, batts for use in commercial building applications and a wide range of pipe insulation. Employees are required to wear personal protective equipment which includes safety toed shoes, ear protection, eye protection and in certain areas may be required to wear dust masks, gloves, respirators, or head protection.
NewProcess Engineer Macpower Digital Assets Edge Private LimitedProcess EngineerPhenix City, AL$92,000–$126,000 / yearWhat You Bring to the Team: Bachelor's degree in engineering or related science with a minimum of 3 years of experience in industrial continuous process manufacturing either as a process, manufacturing or product engineer and 2 years troubleshooting manufacturing processes. Job Summary: The purpose of the Process Engineer's role will be to provide technical leadership to operate a major asset (typical annual revenue of $50MM to $200MM) at target regarding output, usage of material and energy by meeting the product specifications.
Senior Controls Engineer GpacSenior Controls EngineerColumbus, GA115000–130000This is an excellent opportunity for an experienced controls professional who enjoys solving complex engineering challenges and working closely with cross-functional teams. GPAC (Growing People and Companies) is an award-winning search firm specializing in placing quality professionals within multiple industries across the United States since 1990.
Controls Engineer Intellectt INCControls EngineerColumbus, GADesign, program, and maintain industrial control systems using Siemens S7/TIA Portal and Allen-Bradley ControlLogix/CompactLogix platforms. We are seeking an experienced Controls Engineer to design, develop, and support industrial automation and control systems within a manufacturing environment.
Controls Engineer GpacControls EngineerColumbus, GA105000–125000We are seeking a Controls Engineer to join a growing engineering team responsible for designing, programming, and supporting industrial automation systems. GPAC (Growing People and Companies) is an award-winning search firm specializing in placing quality professionals within multiple industries across the United States since 1990.
NewPower System Protection Engineer Schweitzer Engineering LabsPower System Protection EngineerColumbus, GA$84,200–$160,000 / yearAs a Power System Protection Engineer, a typical day might include: Working with customers to apply new technologies or solutions to their power systems. We recognize the importance of a healthy life balance and offer: 10 paid holidays, annual vacation accrual starting at 12 days, 9 paid sick days, and paid family and medical leave that covers 90% of your pay.
Power Systems Automation Engineer Schweitzer Engineering LabsPower Systems Automation EngineerColumbus, GA$84,000–$160,000 / yearAs a Power Systems Automation Engineer in Sales & Customer Service you'll provide solutions and services that help our customers protect and control critical electrical infrastructure and power systems worldwide. As a Power Systems Automation Engineer a typical day might include the following: Helping customers apply SEL products through visits, demonstrations, training courses and telephone contact.
Controls Engineer AdientControls EngineerWest Point, GeorgiaReporting accidents, occupational illnesses, and HSE&E emergencies, and inform supervisor of known HSE&E conditions which could adversely affect other team members, assets or to the public. Summary: Applies electrical and control theory to test, modify and diagnose the electronic and electrical components on all production and plant equipment.