NewElectrical Controls Technician Cedar PointElectrical Controls TechnicianFremont, OHMust have a working knowledge of Allen Bradley controls to include DC and AC drives and a multitude of PLCs from the tried-and-true PLC5 to the latest and greatest ControlLogix. Ability to pass a background check, if 18 years of age or older, which may include, but is not limited to, credit, criminal, DMV, previous employment, education and personal references, per Company policy, unless prohibited by federal, state, or provincial law.
NewAviation Electronics, Electrical & Computer Systems Technician U.S. NavyAviation Electronics, Electrical & Computer Systems TechnicianFostoria, OHWork Environment Assignments with squadrons at naval air stations and aboard aircraft carriers worldwide; work in hangars, avionics labs, and outdoors on flight lines in all weather conditions and high noise environments; close teamwork with other aviation ratings and aircrew in a structured maintenance organization; potential temporary duty with detachments and deployments supporting carrier or expeditionary operations. Additional qualifications for this job may include: United States citizenship and eligibility for a security clearance; normal color perception; interest in aviation and working around aircraft; strong aptitude in electronics, computers, and precision technical work; manual dexterity, good memory, and physical fitness sufficient to work safely on flight lines, in hangars, and on shipboard aircraft.
Electrical Technician - Full Time, 1st Shift Blanchard Valley Health SystemElectrical Technician - Full Time, 1st ShiftFindlay, OhioFull timeDuty 3: Ability to service / maintain electrical equipment but not limited to the following: • Install / maintain high voltage circuits • Install / maintain low voltage circuits • Working knowledge of all types of electrical motors • Able to size wire and connectors • Maintain 480 volt emergency switch gear • Oversee and install various electrical components • Working knowledge of National Electric Code • Understanding and applying computerized building monitoring systems • Small appliance repair • Operate tools specifically used in electrical field. The individual must demonstrate knowledge of the principles of growth and development over the life span and possess the ability to assess data reflective of the patient status and interpret the appropriate information needed to identify each patient’s requirements relative to their age-specific needs and to provide the care needed as described in the area’s policies and procedures.
Electrical & Instrumentation Technician Louis Dreyfus Company B.V.Electrical & Instrumentation TechnicianOHDrives company utility vehicles as necessary to perform tasks assigned by plant management, which may include but are not limited to responding to plant or staff emergencies and/or picking up, dropping off or transporting parts, equipment, instruments supplies and other materials necessary to ensure that the machinery and equipment in the plant remain in good working order. Ability to climb stairs and ladders as well as work at heights, manage confined space entry, withstand extended periods of walking and standing, move manufacturing materials, products and equipment of 50 pounds or more which requires regular bending and lifting.
Senior Electrical Controls Engineer Aptim CorpSenior Electrical Controls EngineerFindlay, OH$90,000–$132,000 / yearKey Responsibilities/Accountabilities: Work includes, among other things, conceptual studies, cost and planning studies, layouts, design calculations (e.g., voltage-drop, short-circuit, protection and coordination, harmonics, lighting, etc.), CAD design, specification development, testing, programming, and drawings development. Will be responsible for working with Electrical CAD Designer to develop process ladder logic, OIT's, and configuring PLCs to meet project requirements along with control panel diagrams, wiring diagrams, and verifying proper functionality.
Electrical Superintendent - Utility Scale Solar Koch IncElectrical Superintendent - Utility Scale SolarOH$120,000–$140,000 / yearElectrical Superintendent - Utility Scale Solar - Ohio, United States - 188726 - Koch. Koch Disruptive Technologies.
NewElectrical Technician Integrated Talent StrategiesElectrical TechnicianBowling Green, OHThe Electrical Technician is responsible for installing, troubleshooting, maintaining, and repairing electrical systems, equipment, and controls in a manufacturing environment. Integrated Talent Strategies (ITS) is a full-service staffing and recruiting firm specializing in placing qualified professionals with leading organizations throughout the Midwest and across the United States.
Senior Electrical Controls Engineer APTIMSenior Electrical Controls EngineerFindlay, OH$90,000–$132,000 / yearWork includes, among other things, conceptual studies, cost and planning studies, layouts, design calculations (e.g., voltage-drop, short-circuit, protection and coordination, harmonics, lighting, etc.), CAD design, specification development, testing, programming, and drawings development. Will be responsible for working with Electrical CAD Designer to develop process ladder logic, OIT's, and configuring PLCs to meet project requirements along with control panel diagrams, wiring diagrams, and verifying proper functionality.
Electrical Technician We Hire PeopleElectrical TechnicianBowling Green, OHThe Electrical Technician is responsible for installing, troubleshooting, maintaining, and repairing electrical systems, equipment, and controls in a manufacturing environment. Integrated Talent Strategies (ITS) is a full-service staffing and recruiting firm specializing in placing qualified professionals with leading organizations throughout the Midwest and across the United States.
NewIndustrial Electrical Maintenance Technician Integrated Talent StrategiesIndustrial Electrical Maintenance TechnicianBowling Green, OHIntegrated Talent Strategies (ITS) is a full-service recruiting and staffing partner connecting skilled professionals with leading organizations across the Midwest and the United States. You isolate the fault using test instruments, reference the schematic, swap a failed sensor, and bring production back up safely and quickly.
Intern/Co-op - Refining Electrical Engineering (Spring 2027) Marathon Petroleum CorpIntern/Co-op - Refining Electrical Engineering (Spring 2027)OHThe majority of Electrical Engineering co-ops and interns enter into the following positions: • Electrical & Instrumentation (E&I) Project Engineers work on a variety of real-world electrical and instrumentation projects in a refinery setting. Responsibilities: As an Electrical Engineer at a Marathon refinery, you can expect to become familiar with industry codes and best practices, build critical thinking skills, and gain an understanding of how all engineering disciplines work together as a cohesive team.
Electrical Superintendent M.C. Dean, IncElectrical SuperintendentBowling Green, OhioFull timeCollaborate with senior management, supervisory personnel, owners, contractors, and design professionals to discuss and resolve work procedures, complaints, and construction problems. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration.
Plant Electrical Engineering Supervisor Ball CorpPlant Electrical Engineering SupervisorFindlay, OH$85,900–$119,890 / yearSkills: Technical knowledge of industrial electrical systems, support equipment, conveyance systems Working knowledge of automation & controls Knowledge of maintenance planning or work order systems Ability to lead and supervise electrical and mechanical maintenance teams Problem solving, trouble shooting and process improvement skills Project management support for plant capital improvements, line speed alterations, conveyance changes and safety initiatives. This role leads a team of electricians and maintenance specialists that focuses on maximizing production throughput, minimizing downtime, and sustaining high equipment availability by leading maintenance activities, troubleshooting electrical and mechanical issues, and implementing proactive improvement strategies.
Lead Electrical Controls Engineer The Kleinfelder Group IncLead Electrical Controls EngineerOH$92,986–$115,531 / yearStep into Your New Role: As a Lead Electrical Controls Engineer joining Kleinfelder's Water Technologies (KWT) team, you will be responsible for the design, implementation, and troubleshooting of electrical, instrumentation, and control systems for industrial, commercial, and municipal water and wastewater treatment systems. Technical Expertise: Strong proficiency in AutoCAD Electrical for schematic design, with experience in Allen Bradley RSLogix5000/Studio5000, Allen Bradley FactoryTalk View Studio, or equivalent control system software.
Electrical Controls Engineer Johnson Service GroupElectrical Controls EngineerFindlay, OHWork includes, among other things, conceptual studies, cost and planning studies, layouts, design calculations (e.g., voltage-drop, short-circuit, protection and coordination, harmonics, lighting, etc.), CAD design, specification development, testing, programming, and drawings development. The ideal candidate has a background in a combustion manufacturing environment (furnaces, boilers, refinery/O&G, glass or steel manufacturing) and uses PLC programming products, primarily those made by Rockwell Automation/Allen Bradley.
Electrical Project Engineer I/II Marathon Petroleum CorpElectrical Project Engineer I/IIFindlay, OHThe electrical project engineer manages and is responsible for all aspects of assigned projects including project scope, estimate, schedule, engineering design, equipment and material selection, project bidding, contractor selection, construction oversight, management of change, safety and environmental oversight, and any other project tasks necessary to complete a successful project. Projects include a wide range of electrical and control equipment, including power distribution systems (medium and low voltage), motor control centers (MCC), programmable logic controllers (PLCs), instrumentation, as well as conduit, wire, and fiber infrastructure to ensure reliable operations and seamless integration of power and control systems.
Electrical Project Engineer III/Senior Marathon Petroleum CorpElectrical Project Engineer III/SeniorFindlay, OHThe electrical project engineer manages and is responsible for all aspects of assigned projects including project scope, estimate, schedule, engineering design, equipment and material selection, project bidding, contractor selection, construction oversight, management of change, safety and environmental oversight, and any other project tasks necessary to complete a successful project. Projects include a wide range of electrical and control equipment, including power distribution systems (medium and low voltage), motor control centers (MCC), programmable logic controllers (PLCs), instrumentation, as well as conduit, wire, and fiber infrastructure to ensure reliable operations and seamless integration of power and control systems.
Maintenance and Electrical Controls Technician SIMONA PMCMaintenance and Electrical Controls TechnicianFindlay, OhioThis position is 100% floor-based, directly responding to equipment breakdowns, performing preventive maintenance, and assisting with project-related tasks. A core responsibility of this role is to troubleshoot Mechanical, Electrical and PLC based control system issues in real time to minimize downtime and support efficient operations.
Instrumentation, Controls and Electrical (IC&E) Technician NAESInstrumentation, Controls and Electrical (IC&E) TechnicianFremont, OhioThis role demands high-level skills for inspecting, repairing, testing, adjusting, installing, and safely removing electronic and electrical components, including systems supporting the plant’s 163 MW duct-firing capability. Some duties may require the use of protective equipment, which can include hard hats, safety glasses, and eye protection, air masks/respirators, ear protection, chemical suits, flame-resistant clothing (FRC), hot gloves, high-voltage protective gear, and fall protection.
Asphalt Plant Mechanic - Electrical Gerken CompaniesAsphalt Plant Mechanic - ElectricalOHInstall, maintain, troubleshoot, and repair production equipment, including mechanical, electrical, and electromechanical systems (e.g., conveyors, motors, drives, controls, circuit boards, and VFDs). This position is responsible for installing, maintaining, and repairing electrical systems while ensuring the proper mechanical functioning of plant equipment and machinery across limestone, sand/gravel, and asphalt operations.
Electrical Technician Aptim CorpElectrical TechnicianFindlay, OH$25–$28 / hourWork that is worthy of your time and talent Respect and flexibility to live a full life at work and at home Dogged determination to deliver for our clients and communities A voice in making our company better Investment into your personal and professional development. Successful candidate will perform a wide variety of electrical tasks including building control and motor control panels, mounting panels to skids, running conduit and wire to panels and instrumentation on skids, and termination testing.
PLC - Control Specialist - Electrical & Controls Marathon Petroleum CorpPLC - Control Specialist - Electrical & ControlsFindlay, OHApply project management skills to all facets of work including application of current technology, design optimization, resource procurement, financial monitoring, scheduling/planning, and contractor/consultant coordination as necessary to provide timely, cost-effective, safe environmentally conscientious, and value-added engineering services to the business partners. The Electrical & Controls - PLC Control Specialists provides services that consist of power and controls design, plc programing, start-up assistance, operations support, emerging technology evaluation, as well as project management and construction oversight.
Maintenance Electrical Project Engineer Magna International, IncMaintenance Electrical Project EngineerBowling Green, OhioAssigns project personnel to specific phases or aspects of project, such as technical studies, product design, preparation of specifications and technical plans and product testing. Through our robust product engineering, outstanding tooling capabilities and diverse process expertise, we continue to bring lightweight and innovative products to market.
Electrical Quality Control Supervisor M.C. Dean, IncElectrical Quality Control SupervisorBowling Green, OhioFull timeThis role is responsible for supervising QC personnel, ensuring contract compliance, driving consistent implementation of the 3-Phase Quality Control process, and serving as the primary quality liaison with project leadership, General Contractors, and Owners. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration.
Electrical QC Supervisor M.C. Dean IncElectrical QC SupervisorBowling Green, OHThis role is responsible for supervising QC personnel, ensuring contract compliance, driving consistent implementation of the 3-Phase Quality Control process, and serving as the primary quality liaison with project leadership, General Contractors, and Owners. Headquarters in Tysons, Virginia, M.C. Dean delivers resilient, secure, and innovative power and technology solutions through engineering expertise and smart systems integration.
Electrical Technician APTIMElectrical TechnicianFindlay, OH$25–$28 / hourSuccessful candidate will perform a wide variety of electrical tasks including building control and motor control panels, mounting panels to skids, running conduit and wire to panels and instrumentation on skids and termination testing. APTIM Corp, is committed to providing an extensive range of benefits that protect and promote the health and financial well-being of our employees and their families through the APTIM Benefits Marketplace https://aptim.makeityoursource.com/ .
Electrical Superintendent, Mission Critical J.E. Dunn Construction Group IncElectrical Superintendent, Mission CriticalBowling Green, OHJE Dunn's Advanced Facilities Group (AFG) combines Mission Critical, Advanced Industries, and Industrial & Manufacturing into one high-performing team focused on cutting-edge work to serve innovative clients on large Industrial & Manufacturing, Data Center, and Semiconductor projects. Our diverse teams around the country strive to enrich lives through inspired people and places everyday, and we need inspired people like you to join us in our pursuit of building perfection.
Electrical Assembly/Service Technician National MachineryElectrical Assembly/Service TechnicianTiffin, OhioPREFERRED QUALIFICATIONS: Experience with low voltage 3 phase power, AC & DC motor controllers, programmable controllers & related displays, industrial networks and personal computers. If you are interested in pursuing a career with a company that is well capitalized and privately held by an ownership group that is focused on long term growth, please consider applying.
Engineer, Design Electrical National MachineryEngineer, Design ElectricalTiffin, OhioPrepares sales-related documents, including cost estimates and project scope of supply, for machine design, customization and/or refurbish/rebuild projects. Works directly with sales, aftermarket, purchasing, manufacturing, and assembly departments to resolve engineering related issues.
Safety Manager M.C. Dean, IncSafety ManagerBowling Green, OhioFull timeResponsibilities: The Construction Safety Manager is responsible for oversight of Construction Project Safety and Health (S&H), and Risk Management, effectively managing multiple Safety programs, developing and implementing M.C. Dean site-specific project safety plans, and collaborating with Project Management in the implementation and leadership of the Operational Risk Management (ORM) process. Participating in meetings with customers, project team members, and contractors/subcontractors and advising on project-specific Risk and Hazard mitigation plans, S&H training program, and technical reports.
Quality Manager Whirlpool CorpQuality ManagerOHAs the only major U.S.-based manufacturer of kitchen and laundry appliances, the company is driving meaningful innovation to meet the evolving needs of consumers through its iconic brand portfolio, including Whirlpool, KitchenAid, JennAir, Maytag, Amana, Brastemp, Consul, and InSinkErator. Specific responsibilities include leading the quality control programs to respond to internal and external customer quality concerns, complete regulatory audits, and drive continuous improvement across all manufacturing processes and product design parameters.
Data Center Facilities Technician, Controls Google LLCData Center Facilities Technician, ControlsLima, OHFrom software to hardware our teams are shaping the future of world-leading hyperscale computing with key teams working on the development of our TPUs Vertex AI for Google Cloud Google Global Networking Data Center operations systems research and much more. Were the driving force behind Googles groundbreaking innovations empowering the development of our cutting-edge AI models delivering unparalleled computing power to global services and providing the essential platforms that enable developers to build the future.
Service Technician II Kenco Logistic ServicesService Technician IIFindlay, OH$25.14–$37.70 / hourHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Service Technician II is responsible for performing general maintenance, repairs and preventative maintenance with all Material Handling Equipment (MHE), automated systems, and conveyors involving all customers and vendors of Kenco Fleet Services.
Maintenance Technician Louis Dreyfus Company B.V.Maintenance TechnicianOHDrives company utility vehicles as necessary to perform tasks assigned by plant management, which may include but are not limited to responding to plant or staff emergencies and/or picking up, dropping off or transporting parts, equipment, instruments supplies and other materials necessary to ensure that the machinery and equipment in the plant remain in good working order. Ability to climb stairs and ladders as well as work at heights, manage confined space entry, withstand extended periods of walking and standing, move manufacturing materials, products and equipment of 50 pounds or more which requires regular bending and lifting.
Service Technician II KencoService Technician IIFindlay, OhioHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. Service Technician II is responsible for performing general maintenance, repairs and preventative maintenance with all Material Handling Equipment (MHE), automated systems, and conveyors involving all customers and vendors of Kenco Fleet Services.