Space Lasers Engineer Starshield Space Exploration Technologies CorpSpace Lasers Engineer StarshieldHawthorne, CA$100,000–$120,000 / yearPREFERRED SKILLS AND EXPERIENCE: • Master's degree or PhD in physics or an engineering discipline • Proficiency with optical analysis tools such as Zemax • Hands-on experience in optical design or system design, integration, and test of laser communication systems • Experience with mixed-signal circuits, processors, FPGAs, Ethernet, SERDES, DRAM interfaces (DDR4), I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components • Opto-mechanical design and analysis experience with precision mounting and steering mechanisms • Knowledge of and experience in lasers, photodiodes, fiber optics, optics testing/troubleshooting techniques, and signal integrity principles • Knowledge of and experience in free-space optical principles, optical component testing/troubleshooting techniques, precision metrology techniques, manufacturing, and integration processes • Experience leading development of commercial communications products • Experience with hardware development for high-reliability applications • Knowledge of and experience in atmospheric optical effects • Ability to assess risk and make design and development decisions without all available data • Ability to work in a fast-paced, autonomously driven, and demanding atmosphere • Competence with optical test equipment (power meters, interferometer, laser sources) • Experience with infrared system alignment and characterization • Competence with Python scripting and a Linux operating system environment • Excellent written and verbal communication skills. RESPONSIBILITIES: • Apply optics and photonics knowledge to optical system development, including design, analysis, and validation • Represent the optical system in program-level, cross-disciplinary trades and issue resolution • Define requirements for high-performant optical systems in challenging environmental conditions • Lead optical architecture definition through internal trade studies, concept of operations definition, and risk reduction testing • Participate in verification testing, including environmental qualification, performance characterization, reliability testing, and fault injection testing • Define and lead field testing of optical experiments and laser communication systems • Review test data and lead anomaly investigation and resolution • Maintain link budgets, design specifications, and system capabilities data • Interface with manufacturing and supply chain teams to ensure final designs can be manufactured in accordance with overall project goals • Collaborate with software and automation teams to develop tools and protocols for automated optical testing • Represent laser communications systems for reliability and risk discussions with internal reliability teams, management, customers, and vendors.
Sr. Space Lasers Engineer Starshield Space Exploration Technologies CorpSr. Space Lasers Engineer StarshieldHawthorne, CA$130,000–$180,000 / yearPREFERRED SKILLS AND EXPERIENCE: • Master's degree or PhD in physics or an engineering discipline • Proficiency with optical analysis tools such as Zemax • Hands-on experience in optical design or system design, integration, and test of laser communication systems • Experience with mixed-signal circuits, processors, FPGAs, Ethernet, SERDES, DRAM interfaces (DDR4), I2C, SPI, operational amplifiers, analog to digital and digital to analog converters, and power supply components • Opto-mechanical design and analysis experience with precision mounting and steering mechanisms • Knowledge of and experience in lasers, photodiodes, fiber optics, optics testing/troubleshooting techniques, and signal integrity principles • Knowledge of and experience in free-space optical principles, optical component testing/troubleshooting techniques, precision metrology techniques, manufacturing, and integration processes • Experience leading development of commercial communications products • Experience with hardware development for high-reliability applications • Knowledge of and experience in atmospheric optical effects • Ability to assess risk and make design and development decisions without all available data • Ability to work in a fast-paced, autonomously driven, and demanding atmosphere • Competence with optical test equipment (power meters, interferometer, laser sources) • Experience with infrared system alignment and characterization • Competence with Python scripting and a Linux operating system environment • Excellent written and verbal communication skills. RESPONSIBILITIES: • Apply optics and photonics knowledge to optical system development, including design, analysis, and validation • Represent the optical system in program-level, cross-disciplinary trades and issue resolution • Define requirements for high-performant optical systems in challenging environmental conditions • Lead optical architecture definition through internal trade studies, concept of operations definition, and risk reduction testing • Participate in verification testing, including environmental qualification, performance characterization, reliability testing, and fault injection testing • Define and lead field testing of optical experiments and laser communication systems • Review test data and lead anomaly investigation and resolution • Maintain link budgets, design specifications, and system capabilities data • Interface with manufacturing and supply chain teams to ensure final designs can be manufactured in accordance with overall project goals • Collaborate with software and automation teams to develop tools and protocols for automated optical testing • Represent laser communications systems for reliability and risk discussions with internal reliability teams, management, customers, and vendors.
NewLaser Engineer - High-Energy Pulsed Laser Systems RedeploymentLaser Engineer - High-Energy Pulsed Laser SystemsSan Francisco, CAThis role involves hands-on work in a fast-moving, cross-functional environment, requiring 2+ years of experience in high-energy laser design and a relevant academic background. A pioneering clean energy technology company is seeking a Laser Engineer to design and develop complex laser systems for advanced fusion and pulsed-power applications.
Sustaining Laser Engineer Diamond Foundry Inc.Sustaining Laser EngineerCA$150,000–$180,000 / yearThis position will often: Sit, stand for long periods, walk, grasp, reach with hands and arms, lift below and above shoulders, bend, twist at the waist, climb, balance, stoop, squat, kneel, crawl, talk, hear, see, use fine finger manipulation, and complete repetitive motions. This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment.
Principal Laser Engineer MKS IncPrincipal Laser EngineerMilpitas, CA$139,000–$231,000 / yearDefine test strategies, build, test and document system prototypes: measure optical and opto-electronic parameters and evaluate results, create test reports and generate design documentation including optical diagrams, drawings, and optical components specifications. Proven experience with optical measurement instruments: beam parameters analyzers, power meters, auto-correlators, fast opto-electronics, oscilloscopes, spectrum analyzers and spectrometers, scanning interferometers.
Laser Engineer - San Leandro FuseLaser Engineer - San LeandroSan Leandro, CaliforniaTo conform to U.S. Government technology export regulations, including the International Traffic in Arms Regulations (ITAR) you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Writing technical reports and giving presentations to communicate design concepts, testing results, and project progress to stakeholders (external and/or internal).
Laser Engineer Lawrence Livermore National LaboratoryLaser EngineerLivermore, CA$175,530–$222,564 / yearPerform complex hands-on work activities on electro-optical components using techniques and methods to ensure optimal performance, which will include alignment, evaluation, calibration (offline and online), troubleshooting complex technical issues, data analysis (using computer-based data acquisition and controls), data archiving, and system documentation. In this critical role, you will be responsible for running and maintaining the advanced laser systems and support hardware for the world's largest laser with 192 beams, ensuring that all laser work is seamlessly planned, coordinated, and executed to support experiments in High Energy Density Physics, Laser Fusion and Ignition, and National Security.
Senior Semiconductor Laser Engineer Aeluma IncSenior Semiconductor Laser EngineerGoleta, CAResponsibilities include performing design and fabrication of laser and other photonics devices; performing materials characterization; fabricating photonic devices in a cleanroom setting; characterizing lasers and other devices; conducting data analysis and preparing presentations summarizing data; participating in meetings with internal and external stakeholders. Qualifications desired for this position include a bachelor's degree and an advanced degree in engineering or science, 3+ years of experience in semiconductor laser design, fabrication and test, proficiency with simulation and design tools, excellent communication and interpersonal skills, the ability to manage technicians, and excellent planning skills.
Laser Engineer AetherfluxLaser EngineerSan Carlos, CaliforniaOptical Modeling and Simulation: Use optical design software (e.g., Zemax, Code V) to model laser systems, perform simulations, and optimize performance parameters. Thermal Management: Work with thermal engineers to design cooling systems and manage thermal effects within laser systems to ensure stability and efficiency.
Laser Engineer aureliussystems.comLaser EngineerSan Francisco, CaliforniaKey Duties and Responsibilities Beam‑Train Architecture & Assembly: Design and assemble the end‑to‑end optical path—including coatings, mirrors, fiber/optics interfaces, and alignment fixtures—to meet power and beam‑quality specifications. Prototype Iteration & Field Trials: Drive rapid bench‑prototype builds through range‑testing cycles (dry‑runs, live engagements), capturing performance data to refine optical and mechanical designs.
Laser Principal Packaging Engineer - Optical Solutions R&D MolexLaser Principal Packaging Engineer - Optical Solutions R&DFremont, CAFull timeOur advanced optical, mechanical, electrical, and software design capabilities support the evolving needs of high-density, high-bandwidth, and flexible optical networks across telecom, datacom, hyperscale datacenters, artificial intelligence, and supercomputing. The position requires close collaboration with R&D and product design teams, manufacturing, suppliers, and customers to ensure laser components meet stringent optical, mechanical, and Telcordia reliability requirements.
Laser Test Engineer - Optical Solutions MolexLaser Test Engineer - Optical SolutionsFremont, CAFull timeOur advanced optical, mechanical, electrical, and software design capabilities support the evolving needs of high-density, high-bandwidth, and flexible optical networks across telecom, datacom, hyperscale datacenters, artificial intelligence, and supercomputing. Develop and maintain test methods for LIV, wavelength/spectrum, kink detection, RIN PSD, far-field divergence, and back-reflection sensitivity across temperature for III-V edge-emitter lasers (EEL), as well as in fiber-coupled packages.
Principal Engineer, Laser Controls Ayar Labs IncPrincipal Engineer, Laser ControlsSan Jose, CA$200,000–$260,000 / yearDefine and own the end-to-end laser module control architecture, including: APC (Automatic Power Control) loops for stable optical output, ACC (Automatic Current Control) strategies for laser drive optimization, Automatic calibration frameworks (power, current, aging compensation, temperature drift), and TEC (Thermoelectric Cooler) control for wavelength and thermal stability. Backed by industry giants like NVIDIA, Mediatek, AMD and Intel and manufactured in partnership with the world's leading semiconductor ecosystem, Ayar Labs' co-packaged optics solution is key to unleashing next-generation AI scale-up architectures.
Senior Opto-Mechanical Engineer (High-Power Lasers) FreeformSenior Opto-Mechanical Engineer (High-Power Lasers)Los Angeles, CA$120,000–$200,000 / yearYou will fully own the design of custom hardware and opto-mechanical-electrical devices, as well as implement novel laser and camera solutions to enable sophisticated closed loop control. As a growing company, the salary range is intentionally wide as we determine the most appropriate package for each individual taking into consideration years of experience, educational background, and unique skills and abilities as demonstrated throughout the interview process.
Principal Engineer, Laser Controls Ayar LabsPrincipal Engineer, Laser ControlsSan Jose, CaliforniaKey Responsibilities Define and own the end-to-end laser module control architecture, including: APC (Automatic Power Control) loops for stable optical output, ACC (Automatic Current Control) strategies for laser drive optimization, Automatic calibration frameworks (power, current, aging compensation, temperature drift), and TEC (Thermoelectric Cooler) control for wavelength and thermal stability. Backed by industry giants like NVIDIA, Mediatek, AMD and Intel and manufactured in partnership with the world’s leading semiconductor ecosystem, Ayar Labs’ co-packaged optics solution is key to unleashing next-generation AI scale-up architectures.
Optical Engineer, Lasers and Photonics Cowboy SpaceOptical Engineer, Lasers and PhotonicsSan Carlos, CaliforniaOur satellites operate in Low Earth Orbit to collect sunlight and enable a new class of capabilities—from powering on-orbit compute, to transmitting energy via infrared lasers (space-to-earth and space-to-space), powering on-orbit compute to delivering secure, high-bandwidth optical data. Export Control Requirement: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), applicants must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
Senior Opto-Mechanical Engineer High-Power Lasers Freeform Future CorpSenior Opto-Mechanical Engineer High-Power LasersLos Angeles, CA$120,000–$200,000 / yearYou will fully own the design of custom hardware and opto-mechanical-electrical devices, as well as implement novel laser and camera solutions to enable sophisticated closed loop control. As a growing company, the salary range is intentionally wide as we determine the most appropriate package for each individual taking into consideration years of experience, educational background, and unique skills and abilities as demonstrated throughout the interview process.
NewLaser Field Service Engineer Laser Away LLCLaser Field Service EngineerSan Jose, CA$90,000–$95,000 / yearEmployees must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. A LaserAway Laser Field Service Engineer will be responsible for all the laser maintenance, safety, and team communication that ultimately support all clinic operations.
Laser Safety Design Engineer - Camera Hardware Apple IncLaser Safety Design Engineer - Camera HardwareCupertino, CADesign, implement, and specify optical and electrical subsystems architecture for mitigating optical hazards Validate optical safety architecture using simulations (LightTools, Zemax, Matlab) and experimental lab setups Collaborate with x-functional teams (system, optical, electrical, product safety, firmware, operations, etc.) to understand and solve issues related to design and implementation of laser safety architecture and processes Use analytical methods (FMEA, FTA) to track use cases and failure modes that violate laser safety compliance Stay abreast of the latest industry optical radiation safety specifications such as IEC-60825, IEC-62471, IEC-62368, etc. As a Camera Hardware Laser Safety Engineer, you will be responsible for the design and development of innovative camera hardware, including visible and IR illumination technologies that enhance the imaging and depth sensing capabilities of Apple products.
Lead Design Engineer - Semiconductor Lasers The Hiring MethodLead Design Engineer - Semiconductor LasersFremont, CaliforniaThe successful candidate will take ownership of laser design activities from concept through fabrication, characterization, qualification, and new product introduction while working closely with internal engineering teams, manufacturing partners, customers, and suppliers. This role will focus on the design and development of high-power Indium Phosphide (InP) semiconductor lasers used in next-generation optical communications and AI-driven data center infrastructure.
Principal Laser Process Engineer Diamond Foundry Inc.Principal Laser Process EngineerCA$150,000–$180,000 / yearThis position will often: Sit, stand for long periods, walk, grasp, reach with hands and arms, lift below and above shoulders, bend, twist at the waist, climb, balance, stoop, squat, kneel, crawl, talk, hear, see, use fine finger manipulation, and complete repetitive motions. This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment.
NewSenior Laser Process Engineer Diamond Foundry Inc.Senior Laser Process EngineerCA$130,000–$165,000 / yearThis position will often: Sit, stand for long periods, walk, grasp, reach with hands and arms, lift below and above shoulders, bend, twist at the waist, climb, balance, stoop, squat, kneel, crawl, talk, hear, see, use fine finger manipulation, and complete repetitive motions. This employer participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. If E-Verify cannot confirm that you are authorized to work, this employer is required to give you written instructions and an opportunity to contact Department of Homeland Security (DHS) or Social Security Administration (SSA) so you can begin to resolve the issue before the employer can take any action against you, including terminating your employment.
NewSenior Quantum Photonics Systems Engineer: Low-Noise Lasers Lead Monarch QuantumSenior Quantum Photonics Systems Engineer: Low-Noise Lasers LeadSan Diego, CA$165,000–$200,000 / yearThis role involves providing technical leadership in designing advanced laser systems for quantum technologies and requires a Bachelor's degree with at least 5 years of relevant experience. Monarch Quantum, Inc. is looking for a Senior Principal Photonics Systems Engineer to join our dynamic team in San Diego, California.
Laser Component Engineer - Optical Solutions R&D MolexLaser Component Engineer - Optical Solutions R&DFremont, CAFull timeMolex possesses a rich heritage in the optical industry, delivering high-performance, field-proven optical solutions spanning components, modules, and fully integrated line cards. The position requires close collaboration with R&D and product design teams, manufacturing, suppliers, and customers to ensure laser components meet stringent optical, mechanical, and Telcordia reliability requirements.
Senior Manufacturing Engineer (Laser Welding) Procept Biorobotics CorpSenior Manufacturing Engineer (Laser Welding)San Jose, CA$131,060–$154,190 / yearIt continues with our one-of-a-kind management program designed to build the best managers in the industry, where our people managers across functions come together to exchange ideas and grow, as both managers and learners, in an environment that challenges, supports and broadens. It starts with our live induction program that serves as an incubator for cross-functional team building, an immersion in Procept's history, jam-packed interactive sessions with executive leadership and a crash-course in the mission and purpose of what we do.
Principal Laser Component Engineer - Optical Solutions Koch IncPrincipal Laser Component Engineer - Optical SolutionsFremont, CAPrincipal Laser Component Engineer - Optical Solutions - Fremont, California, United States - 188838 - Koch. Koch Engineered Solutions.
Sr. Staff Engineer, Hardware Module Integration (Lasers) Ayar LabsSr. Staff Engineer, Hardware Module Integration (Lasers)San Jose, CaliforniaCollaborate with mechanical, system (rack/chassis) electrical, manufacturing and test teams to ensure successful product integration, both on-site and offsites in Asia. The ideal candidate is comfortable working across the full product lifecycle, including prototyping, testing, debugging, and cross-functional collaboration.
Laser Diode Manufacturing Engineer InertiaLaser Diode Manufacturing EngineerLivermore, CaliforniaInertia is taking the most direct, scientifically-proven path to commercializing fusion, leveraging the only successful achievement of fusion ignition, using a process that was pioneered at the U.S. Department of Energy’s (DOE) Lawrence Livermore National Laboratory (LLNL). Employment in this position is conditioned on the candidate’s eligibility for, obtaining and maintaining appropriate government authorization to access technology or information, to the extent required, including without limitation a security clearance, export license, or other documentation required to establish authorization to receive access to such items technology or information.
Principal Laser Design Engineer MACOM Technology Solutions Holdings IncPrincipal Laser Design EngineerCA$98,000–$167,000 / yearAs a successful candidate, you will be a key member in our product development team and be responsible for the design, development, and validation of next-generation semiconductor laser products for datacenters, telecommunications, and emerging technologies. MACOM sells and distributes products globally via a sales channel comprised of a direct field sales force, authorized sales representatives, and leading industry distributors.
Laser Design Engineer (Epi/Device) CspeedLaser Design Engineer (Epi/Device)Palo Alto, CaliforniaProficiency with commercial device simulation software used to support design decisions with production intent — including one or more of: traveling wave laser model tools (e.g., VPI Photonics, Lumerical INTERCONNECT, Photon Design HAROLD), waveguide and mode solvers (e.g., Ansys Lumerical MODE, Photon Design FIMMWAVE), grating/EME solvers, and band structure or gain simulation tools (e.g., Crosslight, SiLENSe, or equivalent); scripting in MATLAB or Python for simulation automation and data analysis. Design and optimize III-V heterostructures and multi-quantum well (MQW) active regions for laser, SOA, and electroabsorption modulator applications, with explicit consideration of growth tolerance, process variation, and production yield; develop and maintain active region simulation models using commercial tools (e.g., band structure solvers, 1-D optical confinement solvers, traveling wave laser models).
Sr. Embedded Software Engineer, Laser Mesh Routing Starlink Space Exploration Technologies CorpSr. Embedded Software Engineer, Laser Mesh Routing StarlinkPalo Alto, CA$175,000–$240,000 / yearRESPONSIBILITIES: Develop highly reliable, real-time software that determines which beams (user, laser, gateway, etc) should be formed in order to provide the best possible user experience for our low-latency, high-bandwidth satellite-based global network. Develop tools for software development and deployment, data analysis and visualization, and test execution across multiple environments, including virtualized hardware environments, real hardware-in-the-loop simulations, and on-orbit testing.
Embedded Software Engineer, Laser Mesh Routing Starlink Space Exploration Technologies CorpEmbedded Software Engineer, Laser Mesh Routing StarlinkPalo Alto, CA$135,000–$160,000 / yearRESPONSIBILITIES: Develop highly reliable, real-time software that determines which beams (user, laser, gateway, etc) should be formed in order to provide the best possible user experience for our low-latency, high-bandwidth satellite-based global network. Develop tools for software development and deployment, data analysis and visualization, and test execution across multiple environments, including virtualized hardware environments, real hardware-in-the-loop simulations, and on-orbit testing.
Senior Laser & SOA Characterization Engineer Lightmatter IncSenior Laser & SOA Characterization EngineerMountain View, CA$210,000–$267,000 / yearExperience operating optical and RF instruments, including laser current drivers, TEC controllers, OSAs, optical power meters, photodetectors, RF spectrum analyzers, oscilloscopes, bias tees, optical filters, polarization controllers, optical switches, and fiber-coupled components. In this role, you will lead advanced characterization, bring-up, validation, and root-cause analysis of semiconductor lasers, tunable laser sources, DFB lasers, external-cavity lasers, laser diodes, and semiconductor optical amplifiers.
NewLead Photonics Systems Engineer Quantum Laser & Noise Control Monarch QuantumLead Photonics Systems Engineer Quantum Laser & Noise ControlSan Diego, CA$160,000–$240,000 / yearA leading quantum technologies company in San Diego is seeking a Senior Principal Photonics Systems Engineer to provide technical leadership in advanced laser systems. The ideal candidate will have at least 15 years of experience in photonic systems design and possess expertise in narrow linewidth and low-noise systems.
Field Service Engineer - Aesthetic, Medical & Dental Lasers (S. California) FotonaField Service Engineer - Aesthetic, Medical & Dental Lasers (S. California)Irvine, CAFull timeThe Field Service Engineer is responsible for performing and documenting laser installations, preventive maintenance, and repairs to Fotona's medical and dental laser systems, accurately and efficiently responding to customer inquiries regarding error codes and orders, and providing management with daily communications regarding service orders. Ability to stand, lift, push/pull, bend, squat, stretch, reach, twist/turn, walk, and reach throughout the day, ability to work at a computer and sit and/or drive for extended periods.
Manufacturing Engineer, Laser Welding Tesla IncManufacturing Engineer, Laser WeldingFremont, CA$91,600–$164,400 / yearThis role own equipment development for laser welding and assembly processes - leading equipment specification development, equipment design, line layout, installation, commissioning, validation, ramp-up, and handover to production. Your will work closely with internal teams including Product Design, Controls, Operations, EH&S, Quality, and Production Engineering, and will coordinate with equipment suppliers to design and develop manufacturing equipment.
Medical Devices -Laser Process Engineer-1903 Keltia Design IncMedical Devices -Laser Process Engineer-1903Western US, CAOne of our major Clients in the Western region of the US is looking for various Laser Process and Development Engineers to be responsible for balancing and bringing in new technologies for the projects and programs on the company's pipeline, with more focus on NPD working close to the design and operations teams to outline, develop and validating the processes. Specifies detailed new product functional requirements; designs, tests and integrates components to generate final designs; and evaluates the design's overall parameters such as (effectiveness, cost, reliability and safety).
Senior Manufacturing Engineer - Assembly, Laser & Material Handling Ensurge Micropower ASASenior Manufacturing Engineer - Assembly, Laser & Material HandlingSan Jose, CA$161,626–$197,833 / yearYou will be responsible for: Turning engineering processes into production-capable systems Driving output, yield, and stability on the line Building the infrastructure (process, equipment, flow, documentation) required for repeatable execution. About Ensurge Micropower Ensurge Micropower (OSE: ENSU) is a pioneer in solid-state microbattery technology, enabling the next generation of intelligent, connected devices.
Manufacturing Engineer - Laser Systems KLA CorpManufacturing Engineer - Laser SystemsMilpitas, CA$106,700–$181,400 / yearOur expert teams of physicists, engineers, data scientists and problem-solvers work together with the world's leading technology providers to accelerate the delivery of tomorrow's electronic devices. This is a unique opportunity to become the go-to expert for sophisticated laser technology, solve highly visible technical challenges, and directly shape the performance of systems used by some of the world's most advanced technology manufacturers.
Senior Laser Project Engineer Lawrence Livermore National LaboratorySenior Laser Project EngineerLivermore, CA$175,530–$267,060 / yearPerform offline assembly of laser components; measure, characterize, and analyze performance using laser diagnostics; design and build experimental tests to validate optical amplifiers, polarization components, mirrors, lenses, laser assemblies, and related hardware while supporting quality assurance, troubleshooting, and system performance improvement. Operate under consultative direction with substantial authority, using in-depth analysis and subject matter expertise in highly advanced concepts to resolve a range of highly complex problems, independently determine strategies, modify approaches, and pursue actions that impact organizational operations or directions and achieve long-term goals.
MTS Laser Physics Design & Development Engineer KYOCERA SLD Laser, IncMTS Laser Physics Design & Development EngineerGoleta, CA$157,000–$185,000 / yearKyocera SLD Laser is seeking a highly accomplished MTS Engineer with deep expertise in laser physics, device design, and physics based simulation to drive next generation laser diode technologies from epitaxial concept through device fabrication and experimental validation. Our GaN laser technologies enable a wide range of applications, including automotive and mobility, specialty and portable lighting, projection and AR/VR displays, biomedical instrumentation, industrial imaging, and emerging communication technologies such as LiFi.
Laser Process Development Engineer, Cell Manufacturing Tesla IncLaser Process Development Engineer, Cell ManufacturingFremont, CAFor more information, visit https://www.tesla.com/careers/search/job/261723 .
NewLaser Development Manufacturing Engineer Tesla MotorsLaser Development Manufacturing EngineerFremont, CA$91,600–$276,000 / yearFor quick access to screen reading technology compatible with this site click here to download a free compatible screen reader (free step by step tutorial can be found here). You will work at the intersection of process innovation, mechanical design, and high-speed automation - transforming prototype concepts into robust, factory-ready manufacturing solutions.
Senior Laser Communications Engineer The Aerospace CorpSenior Laser Communications EngineerEl Segundo, CA$166,400–$249,600 / yearWork with Senior Engineers to support all phases of Ground and Space lasercom development lifecycle which may include requirement definition; assembly, integration & test; anomaly resolution; modeling & simulation; unit, subsystem, and system test; and spacecraft launch and on-orbit support. As the operator of a federally funded research and development center (FFRDC), we are broadly engaged across all aspects of space- delivering innovative solutions that span satellite, launch, ground, and cyber systems for defense, civil and commercial customers.
NewSenior Manufacturing Engineer (Laser Welding) Procept BioRoboticsSenior Manufacturing Engineer (Laser Welding)San Jose, CA$131,060–$154,190 / yearWorking knowledge of design control and cGMP requirements for medical device manufacturing (FDA QSR, ISO 13485‑2003, ISO 9001, EN 46001).Basic CAD skills (e.g., SolidWorks).Qualifications We Would Like You To PossessExpertise in process technologies such as laser cutting, welding, brazing, and joining. Plan and execute new technical projects, determining scope, scale, and ROI.Build or procure improved fixtures, tooling, or equipment to increase quality, reliability, and yield.
NewLaser Field Service Engineer LaserAwayLaser Field Service EngineerSan Jose, CA$90,000–$95,000 / yearEmployees must be able to perform the essential functions of the position satisfactorily and, if requested, reasonable accommodations will be made to enable employees with disabilities to perform the essential functions of their job, absent undue hardship. A LaserAway Laser Field Service Engineer will be responsible for all the laser maintenance, safety, and team communication that ultimately support all clinic operations.
Laser Development Manufacturing Engineer Tesla IncLaser Development Manufacturing EngineerFremont, CA$91,600–$276,000 / yearLead the development and optimization of laser-based processes (welding, surface texturing, coating removal) and alternative joining technologies (ultrasonic, resistance, friction stir, arc welding) for robotic components using metals (Al, Cu, steel) and high-performance polymers (PEEK, nylon, PET). Hands-on experience in manufacturing process development, including laser welding, surface texturing, and advanced joining methods (ultrasonic, friction stir, resistance) for metals and high-performance polymers, with demonstrated success transitioning processes from lab-scale to high-volume production.
Senior Manager, Laser Development Coherent CorpSenior Manager, Laser DevelopmentFremont, CAWe are a vertically integrated manufacturing company that develops innovative products for diversified applications in the industrial, optical communications, military, life sciences, semiconductor equipment, and consumer markets. Coherent provides a comprehensive career development platform within an environment that challenges employees to perform at their best, while rewarding excellence and hard-work through a competitive compensation program.
Senior Manager, Laser Development II-VI Optical Systems, Inc.Senior Manager, Laser DevelopmentFremont, CAWe are a vertically integrated manufacturing company that develops innovative products for diversified applications in the industrial, optical communications, military, life sciences, semiconductor equipment, and consumer markets. Coherent provides a comprehensive career development platform within an environment that challenges employees to perform at their best, while rewarding excellence and hard-work through a competitive compensation program.
Laser Scientist Vector AtomicLaser ScientistPleasanton, CA$10,000–$150,000Your work will primarily focus on architecting the transition of high-precision frequency combs and ultra-low-noise systems from traditional discrete components to advanced Photonic Integrated Circuit (PIC) platforms. By combining hands-on benchtop metrology with sophisticated chip-level simulation, you will drive the innovation of laser architectures for next-generation quantum timing, atomic clocks, and inertial sensors.