Inspector II, Manufacturing Support (3rd Shift) ComriseInspector II, Manufacturing Support (3rd Shift)Redmond, WA$0–$26 / hourTemporaryContractorFull timeInterprets prints, manufacturing drawings, diagrams, wire cards and lists in approving or rejecting in-process or final assemblies. Conducts dimensional and electrical inspection of sub-assemblies or final systems assemblies.
MANUFACTURING ASSOCIATE BC ForwardMANUFACTURING ASSOCIATEBothell, WA$20.15–$24.15 / hourFull timeWork in a cleanroom and perform aseptic processing with required PPE, including safety shoes, safety glasses, aprons, face shields, PAPR, lab coats, full body gowns, hairnets, gloves, and hearing protection. The ideal candidate will have experience in regulated cGMP operations, cleanroom practices, and electronic manufacturing systems with a proven ability to execute production assignments accurately, on time, and in compliance with SOPs and Good Manufacturing Practices .
Manufacturing Engineer II, III, Sr (Multiple Shifts) - Lunar Blue Origin LLCManufacturing Engineer II, III, Sr (Multiple Shifts) - LunarSeattle, WAFull timeand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Manufacturing Engineer 3 Spectraforce Technologies Inc.Manufacturing Engineer 3Woodmont Beach, WAFull timeManufacturing Engineers are owners of the build plan and ensure compliance to design configuration and process requirements, Manufacturing Engineering performs Design for Manufacturing and Assembly (DFMA) analysis and develops an integrated build plan consisting of work instructions for assembly/fabrication, kitting, tooling, inspection requirements, and other outputs to endure fabrication meets design, test, and program requirements. The Flight test Manufacturing Engineer is an assembly and installation engineer within Boeing Test and Evaluation (BT&E) that supports installation planning by providing design review, manufacturing plan authorship, fabrication sourcing (inside and outside of Boeing), interface with procurement (including tracking), and supports during the build/installation.
Manufacturing Engineer III Hexcel CorporationManufacturing Engineer IIIKent, WA$77,968–$130,228 / yearFull timeHexcel also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. With our strong investment in research and development and our culture of continuous improvement, Hexcel is the industry leader in the manufacturing of advance composite materials, including carbon fiber, woven reinforcements, resins, prepregs, honeycombs and additive manufactured parts.
Manufacturing Engineer 3 Hexcel CorporationManufacturing Engineer 3Kent, WA$77,968–$130,228 / yearFull timeHexcel also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. With our strong investment in research and development and our culture of continuous improvement, Hexcel is the industry leader in the manufacturing of advance composite materials, including carbon fiber, woven reinforcements, resins, prepregs, honeycombs and additive manufactured parts.
Advanced Composites Manufacturing Lead - 1st Shift Sekisui AerospaceAdvanced Composites Manufacturing Lead - 1st ShiftRenton, WAFull timeWith complete customer satisfaction as our focus and through the relentless efforts of our skilled employees, SEKISUI Aerospace has achieved and continues to maintain an unequaled level of performance. They are responsible for coordinating with engineers to study and improve designs and shop-aids, as well as operate machines and equipment with an eye for developing strategies and workflow.
Manufacturing Engineer III/Sr. - Design for Automation Terex CorporationManufacturing Engineer III/Sr. - Design for AutomationRedmond, WAFull timeThe Senior Manufacturing Engineer - Design for Automation (DFA) is responsible for enabling automationready, scalable, and repeatable manufacturing solutions for Genie products by leading DFA efforts upstream through New Product Development (NPD) and supporting robust execution across Manufacturing Engineering and Manufacturing Technical Services (MTS). Genie Industries, a business segment of the Terex Corporation, is headquartered in Bothell, WA with branch offices worldwide; we manufacture material lifts, aerial work platforms, trailer-mounted booms and light towers, telehandlers, scissor lifts and self-propelled telescopic and articulating booms.
Intern, Manufacturing Engineering Sekisui AerospaceIntern, Manufacturing EngineeringRenton, WAInternFull timePay ranges may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Manufacturing Production Technician Bruker Nano IncManufacturing Production TechnicianMill Creek, WAFull timeExecute the day-to-day production of the Company's consumables to meet customer demand* Collaborate with manufacturing engineers to identify, troubleshoot, and resolve system or process excursions* Perform complex, mechanical assembly and quality inspection of products according to established specifications* Ensure the on-time delivery of high value, time-sensitive material to both vendors and customers* Maintain a clean, safe, and orderly work area* Other duties as assigned. or B.S. degree in STEM discipline* 2-10 years of experience working in a high-tech manufacturing setting either in a technician or production control capacity* Experience operating within Enterprise Resource Planning (ERP) and Manufacturing Execution Systems (MES)* Ability to run predefined recipes on CVD chambers, liquid handles, ovens, and imaging systems.
Manufacturing Technician I Ducommun Inc.Manufacturing Technician IEverett, WAFull timeStarting as a hardware supply store during the California Gold Rush and eventually assisted in the birth of the aerospace industry in Southern California by providing aircraft aluminum to early aerospace pioneers like Lindbergh, Douglas and Lockheed. We specialize in electronic and structural systems, producing complex products and components for commercial aircraft platforms, mission-critical military and space programs, and sophisticated industrial applications.
Manufacturing Engineer 2 (Aerospace) Parker Hannifin CorporationManufacturing Engineer 2 (Aerospace)Woodmont Beach, WA$83,250–$138,550 / yearFull timeParker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Working with some of the most brilliant minds in the industry, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parker's goal of addressing the world's most pressing engineering challenges.
Manufacturing Engineer II Hexcel CorporationManufacturing Engineer IIKent, WA$77,968–$117,324 / yearFull timeHexcel also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. With our strong investment in research and development and our culture of continuous improvement, Hexcel is the industry leader in the manufacturing of advance composite materials, including carbon fiber, woven reinforcements, resins, prepregs, honeycombs and additive manufactured parts.
Manufacturing Assembly Tech II Bruker Nano IncManufacturing Assembly Tech IIMill Creek, WAFull timeThe Manufacturing Technician I is responsible for: following documented procedures, such as Manufacturing Work Instructions; performing inspections and functional tests to verify quality conformance; and following all safety protocols to perform all tasks in a safe environment. The base salary for the role will depend on a several job-related factors, including, but not limited to education, training, experience, the geographic location of the successful candidate, skills, competencies, job-related knowledge and travel requirements for this position.
Manufacturing Engineer III Blue Origin LLCManufacturing Engineer IIISeattle, WAFull timeand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Spacecraft or launch vehicle integration experience with demonstrated technical expertise in one or more of the following areas: Fluids/Propulsion Systems, Harnessing, Electrical Power Systems, Thermal Protection Systems, Environmental Control and Life Support Systems, Integrated Vehicle Test, MGSE/EGSE.
Manufacturing Engineer III - Product Development Sekisui AerospaceManufacturing Engineer III - Product DevelopmentRenton, WAFull timeThis responsibility encompasses the entire R&D manufacturing value chain, including, but not limited to, Design for Manufacturability work, tool design & selection, process creation & optimization, vendor sourcing & interaction, quality planning, and documentation associated with the processes that the Manufacturing Engineer oversees. Pay ranges may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets.
Experienced Manufacturing Engineer (CapEx Focus) Parker Hannifin CorporationExperienced Manufacturing Engineer (CapEx Focus)Woodmont Beach, WA$83,250–$138,550 / yearFull timeParker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Leads capital equipment and process improvement projects end-to-end-managing scope, schedule/milestones, budget/CapEx tracking, and cross-functional coordination through installation, start-up, and closure while escalating risks/issues as needed.
Aerospace Manufacturing Production Worker - All Shifts Sekisui AerospaceAerospace Manufacturing Production Worker - All ShiftsRenton, WAFull timeseeking motivated individuals who thrive in fast-paced manufacturing environments and are committed to delivering quality at every step of the production process for multiple production level roles across our Renton, WA location. E-Verify allows us to confirm the employment authorization of newly hired employees through an electronic database maintained by the Social Security Administration and Department of Homeland Security.
Manufacturing Engineer (Aftermarket) Parker Hannifin CorporationManufacturing Engineer (Aftermarket)Woodmont Beach, WA$69,500–$115,000 / yearFull timeParker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Working with some of the most brilliant minds in the industry, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parker's goal of addressing the world's most pressing engineering challenges.
Senior Manufacturing Engineer (CapEx) Parker Hannifin CorporationSenior Manufacturing Engineer (CapEx)Woodmont Beach, WA$111,450–$195,150 / yearFull timeManagement of extensive capital project - leadership experience spanning capital equipment procurement (specification development, supplier evaluation, RFQ/RFP support, vendor selection, FAT/SAT), project management (charter, scope, schedule, risk, cost control), CapEx justification (NPV/ROI/payback aligned to strategy), and equipment/line installation, commissioning, and validation with minimal operational disruption. Parker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost.
Manufacturing Engineer (Aerospace) Parker Hannifin CorporationManufacturing Engineer (Aerospace)Woodmont Beach, WA$69,500–$115,000 / yearFull timeParker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Working with some of the most brilliant minds in the industry, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parker's goal of addressing the world's most pressing engineering challenges.
Manufacturing Planner 2 Spectraforce Technologies Inc.Manufacturing Planner 2Seattle, WAFull timeDevelops, implements and maintains various manufacturing plans, Bill of Materials, work instructions and illustrations to define and document as-built configuration. Assists with development and integration of suppliers, processes, materials, data and technology to meet manufacturing and delivery requirements.
Sr Software Project Manager - MES Implementation (Manufacturing) Sekisui AerospaceSr Software Project Manager - MES Implementation (Manufacturing)Renton, WA$140,000–$170,000 / yearFull timePay ranges may be higher or lower for non-resident WA employees, based on the market data for their region, allowing us to pay employees competitively in different geographic markets. We are seeking an experienced Senior Software Project Manager to lead the digital transformation of our manufacturing operations from traditional paper-based processes to a fully integrated paperless Manufacturing Execution System (MES).
Production Supervisor, 3rd Shift - Aerospace Manufacturing Leadership Opportunit Hytek FinishesProduction Supervisor, 3rd Shift - Aerospace Manufacturing Leadership OpportunitKent, WAFull timeThis position requires access to export-controlled information and all applicants must satisfy U.S. export control regulations with authorization to work in the U.S. Non-U.S. persons would require an export license in order to work in our facility. This position requires access to export-controlled information and all applicants must satisfy U.S. export control regulations with authorization to work in the U.S. Non-U.S. persons would require an export license in order to work in our facility.
Senior Manufacturing Engineer (Aerospace) Acara SolutionsSenior Manufacturing Engineer (Aerospace)Everett, WAFull timeJob Requirements.
Product Manager - Manufacturing Technology (Stratus Platform) McKinstryProduct Manager - Manufacturing Technology (Stratus Platform)Seattle, WA$89,010–$151,300 / yearFull timeThis position is based in Seattle, WA, enabling direct proximity to fabrication facilities in the Pacific Northwest, more efficient onsite support and quicker turnaround for shop-floor needs, and periodic travel to remote fabrication facilities for configuration validation and implementation alignment. The position is responsible for product management, project coordination, and cross-departmental implementation leadership for the Stratus Manufacturing platform, which supports construction fabrication and Off-Site Manufacturing (OSM) functions across McKinstry.
Production Value Stream Manager - Aerospace Manufacturing Leadership Opportunity Hytek FinishesProduction Value Stream Manager - Aerospace Manufacturing Leadership OpportunityWoodmont Beach, WAFull timeIs skilled in monitoring and assessing the performance of self, other individuals, and teams to make improvements and take corrective action, creating a track record of successful leadership. The role is responsible for managing the direction of the Production team across all shifts and the full breadth of the Value Stream utilizing support from Production Leads and shift Production Supervisors.
Manufacturing & Supply Chain Tech Lead, Manufacturing & Supply Chain Center of Excellence, AWSI - Automotive & Manufacturing Amazon.com IncManufacturing & Supply Chain Tech Lead, Manufacturing & Supply Chain Center of Excellence, AWSI - Automotive & ManufacturingSeattle, WAAutomotive & Manufacturing is one of our highest-priority industry verticals - and, through the Manufacturing & Supply Chain Center of Excellence (CoE), we"re building the team that will define how the world"s factories and supply networks run in an era powered by cloud and AI. Inside AWS, you are an ambassador of our customers, articulating customer needs by synthesizing your observations from customer engagements and industry trends (industrial AI, digital twins, connected operations) to inform the strategic roadmap.
Technical Account Manager, Okta Enterprise OKTATechnical Account Manager, Okta EnterpriseBellevue, WAFull timeTechnical Mastery (Workforce Identity Focus): Extensive proficiency utilizing Okta feature sets and platforms to portray a design, or architecture, that satisfies well-known customer use cases to a customer technical persona including architect. Generate specific vertical/use case insights and thought leadership, demonstrating an advanced level of Okta platform and identity domain knowledge, with a focus on enhancing customers' security posture.
Warehouse Technician I Ducommun Inc.Warehouse Technician IEverett, WAFull timeStarting as a hardware supply store during the California Gold Rush and eventually assisted in the birth of the aerospace industry in Southern California by providing aircraft aluminum to early aerospace pioneers like Lindbergh, Douglas and Lockheed. We specialize in electronic and structural systems, producing complex products and components for commercial aircraft platforms, mission-critical military and space programs, and sophisticated industrial applications.
NewManufacturing Engineer - Process Quality, Hardware Engineering - Manufacturing AmazonManufacturing Engineer - Process Quality, Hardware Engineering - ManufacturingSeattle, WABachelor's or Master's degree in Mechanical, Industrial, Manufacturing Engineering or similar related field or equivalent experience.2+ years of Manufacturing Engineering work experience with server platforms or on high‑tech hardware.3+ years of product development experience. Our Process Quality team works closely with our ODMs, CMs, internal AWS hardware and software development teams, and with upstream component vendors to scale up manufacturing processes and ensure we can achieve our throughput and quality targets.
Director of Auto & Manufacturing - North America Sales , Auto & Manufacturing Industry Business Uni AmazonDirector of Auto & Manufacturing - North America Sales , Auto & Manufacturing Industry Business UniSeattle, WAUSA, MA, Boston - 224,400.00 - 303,500.00 USD annually USA, MI, Detroit - 224,400.00 - 303,500.00 USD annually USA, MN, Minneapolis - 224,400.00 - 303,500.00 USD annually USA, NY, New York - 246,800.00 - 333,900.00 USD annually USA, TX, Dallas - 224,400.00 - 303,500.00 USD annually USA, WA, Seattle - 224,400.00 - 303,500.00 USD annually Description In this executive level sales leadership role, you will lead the AWS North America Sales team in the Auto & Manufacturing Industry Business Unit , responsible for some of the most iconic automotive and manufacturing companies across North America.
NewSr. Manufacturing Engineer - Industrial Engineer, Hardware Engineering - Manufacturing AmazonSr. Manufacturing Engineer - Industrial Engineer, Hardware Engineering - ManufacturingSeattle, WAOur Industrial Engineering team works closely with our ODMs, CMs, internal AWS hardware and software development teams, and with upstream component vendors to design and optimize the physical production floor to maximize throughput, minimize waste and balance workloads across stations. Bachelor's or Master's degree in Mechanical, Industrial, Manufacturing Engineering or similar related field or equivalent experience.2+ years of Manufacturing Engineering work experience with server platforms or on high-tech hardware.5+ years of manufacturing process development.
Manufacturing Engineer 2 The Structures Company, LLCManufacturing Engineer 2Seattle, WAAs trusted partners to leading aerospace and defense OEMs and Tier 1 suppliers, we connect professionals with career opportunities to grow and excel in aviation, aerospace, and defense. Bachelor, Master, or Doctorate of Science degree in engineering, computer science, mathematics, physics, or chemistry from an accredited course.
NewManufacturing Engineer 3 - Electrical Cts Technology SolutionsManufacturing Engineer 3 - ElectricalSeattle, WADuties may include (but are not limited to):• Develops and implements production and tooling methodologies• Participates on Integrated Product Teams (IPTs) to integrate technical solutions across multiple disciplines• Develops, identifies and implements conceptual designs and maintains the program architecture for build• Leads and implements manufacturing plans• Conducts producibility and variation analyses to ensure that manufacturing process capability matches requirements• Leads in providing producibility information for inclusion in project plans and helps document producibility best practices• Analyzes design/build concepts to evaluate producible design/build definitions• Resolves technical problems of significant impact to performance, cost or schedule• Coordinates and implements new engineering principles, theories, advanced technologies and concepts• Validates and ensures production readiness of solutions to complex problems. Knowledge with electrical/mechanical manufacturing process and assembly sequencing• Prior experience working on client Manufacturing System• Experience with using manufacturing tools (PDM, CAPP, CMES, MESci, EPARTs, GOLDesp)Preferred Skills:• 3 + years of experience working in a production and/or manufacturing environment• 3 + years of experience leading or managing projects and/or teams• 3 + years of experience in a Manufacturing Engineering role• Experience with space or military electronics• Experience in Project management• Experience in Work Package EstimatingMinimum of a Bachelor of Science degree from an accredited course of study in engineering, computer science, mathematics, physics or chemistry (e.g.
Manufacturing Engineer, Solar Starlink Space Exploration Technologies CorpManufacturing Engineer, Solar StarlinkRedmond, WA$95,000–$115,000 / yearRESPONSIBILITIES: Design and implement electro-mechanical assembly and test processes Collaborate with the mechanical design team to incorporate design for manufacturability Lead prototype builds ensuring incremental milestones for the production development are met Ensure manufacturing systems are capable of hitting high volume rate, cost and quality targets Lead facilities development, floor layout, headcount requirements and material flow definition Identify tooling and hardware requirements, design and implement into production processes Identify automation opportunities and establish requirements as well as evaluating return on investment for each Work with in-house resources or vendors as necessary to develop these solutions and implement on production line. We are looking for talented, creative, and driven manufacturing engineers to drive manufacturing tools and processes, from initial concept development to full scale production, and will interact regularly with senior leadership during critical design phases.
Test Automation Engineer, Manufacturing Helion Energy IncTest Automation Engineer, ManufacturingEverett, WAThis role sits within Manufacturing Engineering and supports the transition from prototype builds to volume manufacturing by developing production test processes, integrating instrumentation, improving test software, troubleshooting equipment issues, and ensuring test stations are safe, repeatable, maintainable, and scalable. Work cross-functionally with Design Engineering, Operations Engineering, Maintenance, technicians, and vendors to improve design for test, automation, manufacturability, maintainability, MES integration, traceability, and production ramp readiness.
Manufacturing Engineer - Supplier Development Starlink Space Exploration Technologies CorpManufacturing Engineer - Supplier Development StarlinkRedmond, WA$95,000–$115,000 / yearRESPONSIBILITIES: • Improve quality, cost, delivery, and capacity metrics for mechanical hardware used in the Starlink satellite systems • Collaborate with design, materials, and manufacturing engineers to gain an in-depth knowledge of piece part, assembly, metrology, and/or sub-system design intent • Support the procurement team to strategically source parts matched with supplier competencies by reviewing and assessing supplier manufacturing processes and quality systems • Create and define supplier technical and quality requirements based on customer and program requirements and expectations for NPI and production phases • Lead resolution of supplier quality issues through root cause analysis, while functioning as liaison between purchasing, engineering, production, and suppliers • Define product technical requirements, and ensure supplier compliance with these requirements • Implement and monitor the production part approval process (PPAP) with selected suppliers to enable rate production • Analyze supplier quality and delivery metrics to identify trends and pinpoint systemic performance gaps and root causes to drive supplier improvement plans • Conduct independent research to identify potential new suppliers and capabilities in manufacturing and metrology • Identify and drive product and process improvements to lower part cost, reduce supply risk, eliminate potential defects, and improve cycle time • Effectively manage mission-critical supply chain by establishing excellent working relationships and regular lines of communication with suppliers • Demonstrate a strong sense of ownership, proactivity, technical excellence, creativity, self-direction, and courage • Collaborate with teams, lead projects, and continuously drive improvement in the supply base. • Proven track record of taking ownership of projects, negotiating successfully to reduce costs, and influencing engineering customers to drive results • Knowledge of statistical techniques and methods (design of experiments, Six Sigma, etc.) • Proficiency in Geometric Dimensioning and Tolerancing (GDT) principles and applications • Knowledge of metrology tools and techniques for measuring and characterizing mechanical parts • Knowledge of lean, production, and supply chain concepts • Exceptional analytical, problem-solving, time management, and organizational skills • Ability to act quickly in a fast-moving and high-stress environment.
Manufacturing Engineer I Karman Holdings IncManufacturing Engineer IMukilteo, WAHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. The Manufacturing Engineer I supports designs through the design-development cycle and into production with emphasis of design producibility, manufacturing process development and support, and oversees the transition of product to production including follow on support.
Manufacturing Engineer II Karman Holdings IncManufacturing Engineer IIMukilteo, WAHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. The Manufacturing Engineer II supports designs through the design-development cycle and into production with emphasis of design producibility, manufacturing process development and support, and oversees the transition of product to production including follow on support.
NewManufacturing Engineer II Fortive CorporationManufacturing Engineer IIEverett, WA$81,190–$135,585 / yearQualifications Bachelor's degree in Manufacturing Engineering, Manufacturing Engineering Technology, Plastics Manufacturing Engineering, or Mechanical Engineering from an ABET certified university.3-5 years of related experience. As a Manufacturing Engineer II with Fluke, you will be tasked with analyzing, developing, implementing, and maintaining methods, manufacturing operation sequences, specifications, and equipment requirements for production/assembly of new and existing products.
Manufacturing Technician C - 2nd Shift L3Harris Technologies IncManufacturing Technician C - 2nd ShiftRedmond, WA$27.40–$49.04 / hourBy submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security.
Manufacturing Technician C - 1st Shift L3HarrisManufacturing Technician C - 1st ShiftRedmond, WA$27.40–$49.04 / hourJob Title: Manufacturing Technician C Job Code: 38607 Job Location: Redmond, WA Job Schedule: 1st Shift 4/10: Employees work 10 hours per day, 4 days a week (Mon - Thu 5:30am - 4pm) Job Description: We are currently seeking an experienced, precision mechanical Manufacturing Technician C to perform a variety of assembly duties including mechanical rocket engine assembly and test. Please click here for the E-Verify Poster in English (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) or Spanish (https://www.e-verify.gov/sites/default/files/everify/posters/EVerifyParticipationPoster.pdf) .
Senior Manufacturing Test Engineer (Aesthetics Med Device) (Bothell WA) Bausch HealthSenior Manufacturing Test Engineer (Aesthetics Med Device) (Bothell WA)Bothell, WA$95,000–$130,000 / yearLeads technical design reviews · Documents, validates and maintains test fixtures and test systems for Production, Service, and Subcontractors · Creates, implements, and monitors key performance indicators and metrics · Performs data analysis and trending on production test processes to drive improvement · Leads root-cause failure analysis · Works with the quality team and contract manufacturers to identify and eliminate sources of defects **Experience, Education, Training, Traits:** · BS degree in Electrical Engineering, Computer Engineering, related field, or equivalent experience · 3-5 years in a manufacturing test engineering role, or equivalent experience · Experience designing and implementing test systems including development of custom PCBAs and test fixtures in a manufacturing context · Experience writing scripts or programs for manual and automated tests · Experience analyzing and interpreting circuit diagrams/schematics and troubleshooting electrical circuits · Familiarity with basic electrical test equipment (DMM, oscilloscope, function generator, etc.) · Experience in medical device manufacturing a plus · Working knowledge of medical device FDA QSR's, ISO13485 and IEC-60601 requirements is a plus · Strong analytical skills · Effective communication and documentation skills · A self-motivated and results-oriented individual **Desired skills:** · Visual Basic / C# .net programming experience · SQL database experience · Using statistical software to conduct analysis such as measurement system analysis (MSA) · Understanding of lean manufacturing concepts (RCCA, pFMEA, etc.) · Experience troubleshooting test equipment and processes · Experience improving production test output, cycle time, yield, and capabilities · Background in RF, Laser products, and/or diagnostic or therapeutic ultrasound · Demonstrated ability to coach and train production personnel. · Leads in all aspects of production test development including: planning, test specification, test procedure, test software development, fixture and tool development, verification and validation execution, and test implementation · Leads in the definition, development, and implementation of board, module, and system level tests at Solta and suppliers · Coordinates with R&D on New Product Introduction manufacturing test development to drive Design for Test (DFT) and Design for Manufacturability (DFM) · Identifies and executes opportunities to optimize test solutions for the manufacture of electromechanical assemblies and products.
Manufacturing Engineer III Karman Holdings IncManufacturing Engineer IIIMukilteo, WAHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. Key involvement includes design for manufacturability early in the product development, ensuring intrinsic quality is built-in to the product through robustness of processes and supporting continuous improvement and maintenance throughout the production cycle.
Manufacturing Engineer - Supplier Development, Optics & Optomechanical Systems Starlink Space Exploration Technologies CorpManufacturing Engineer - Supplier Development, Optics & Optomechanical Systems StarlinkRedmond, WA$95,000–$115,000 / yearRESPONSIBILITIES: • Improve quality, cost, delivery, and capacity metrics for mechanical hardware used in the Starlink satellite and ground station systems • Collaborate with design, materials, and manufacturing engineers to gain an in-depth knowledge of piece part, assembly, metrology, and/or sub-system design intent • Drive design for manufacturing feedback and best practices with peer teams for efficient and highly scalable production designs • Support the procurement team to strategically source parts matched with supplier competencies by reviewing and assessing supplier manufacturing processes and quality systems • Create and define supplier technical and quality requirements based on customer and program requirements and expectations for NPI and production phases • Lead resolution of supplier quality issues through root cause analysis, while functioning as liaison between purchasing, engineering, production, and suppliers • Define product technical requirements, and ensure supplier compliance with these requirements • Implement and monitor the production part approval process (PPAP) with selected suppliers to enable rate production • Analyze supplier quality and delivery metrics to identify trends and pinpoint systemic performance gaps and root causes to drive supplier improvement plans • Conduct independent research to identify potential new suppliers and capabilities in manufacturing and metrology • Identify and drive product & process improvements to lower part cost, reduce supply risk, eliminate potential defects, and improve cycle time • Effectively manage mission-critical supply chain by establishing excellent working relationships and regular lines of communication with suppliers • Demonstrate a strong sense of ownership, proactivity, technical excellence, creativity, self-direction, and courage • Collaborate with teams, lead projects, and continuously drive improvement in the supply base. PREFERRED SKILLS AND EXPERIENCE: • Master's degree in optics, engineering, business, or supply chain • Proven track record of taking ownership of projects, negotiating successfully to reduce costs, and influencing engineering customers to drive results • Knowledge of statistical techniques and methods (design of experiments, Six Sigma, etc.) • Knowledge of lean, production, and supply chain concepts • Exceptional analytical, problem-solving, time management, and organizational skills • Ability to act quickly in a fast-moving and high-stress environment.
NewDFX Manufacturing Engineer: NPI & Process Leader Fortive CorporationDFX Manufacturing Engineer: NPI & Process LeaderEverett, WAThe ideal candidate will have a Bachelor's degree in Engineering and 5-8 years of experience in manufacturing engineering, focusing on continuous improvement and cost reduction. Fortive is seeking a DFX Manufacturing Engineer in Everett, Washington to lead design for excellence across new product introductions.
Manufacturing Engineer, Components Test Space Exploration Technologies CorpManufacturing Engineer, Components TestRedmond, WA$105,000–$120,000 / yearWe are looking for a talented manufacturing engineer to support the production of Starlink satellites, who will be responsible for leading the efficient and reliable acceptance testing of satellite electronics, development of advanced electrical test systems, and evolution of production and testing processes. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
NewManufacturing Support Technician II AGC BiologicsManufacturing Support Technician IIBothell, WashingtonThe Manufacturing Support Technician plays a hands‑on role on the production floor, supporting execution, maintaining documentation accuracy, and partnering with Manufacturing, Engineering, and Supply teams to enable efficient and compliant operations. Together with our team members across Europe, the U.S., and Japan, we deliver development and manufacturing of mammalian and microbial-based therapeutic proteins, plasmid DNA (pDNA), messenger RNA (mRNA), viral vectors, and genetically engineered cells therapies.
Sr. PCBA Manufacturing Engineer, Amazon Leo Amazon.com IncSr. PCBA Manufacturing Engineer, Amazon LeoBellevue, WAYoull work closely with the Design Engineering and Supplier Manufacturing teams to ensure new designs are optimized for manufacturing while driving improvements in yield, cycle time, and cost for existing hardware. Amazon Leo will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity.