TEACHER - PLUMBING/WELDING - VARIOUS SCHOOLS Mobile County Public SchoolsTEACHER - PLUMBING/WELDING - VARIOUS SCHOOLSMobile, ALMust have a current valid Plumbing Contractors or Welders License OR Must have passing scores on the Alabama State Board of Education approved occupational proficiency examination in Plumbing NOCTI 0110 or Welding AWS Performance Tests three required areas SMAW 3-G uphill progression D1.1 required GTAW 3-G uphill progression steel required FCAW 3-G uphill progression D1.1 required GTAW 3-G uphill progression aluminum D1.2 optional by August 1. Applicants selected for certified positions must have undergone an ABIFBI criminal history background check fingerprinting administered through sites selected and approved by the MCPSS and State of Alabama Education Department and been declared suitable and fit to teach under state law.
Saraland High School - Welding Teacher Alabama State Department of EducationSaraland High School - Welding TeacherSaraland, ALMeet current Alabama State Department of Education (ALSDE) Entry-Level Occupational Proficiency requirements for Welding by meeting one of the following: Associate's degree or higher in Welding or a related field; Passing scores on one of the ALSDE-approved Entry-Level Occupational Proficiency options, including: Three AWS Performance Tests consisting of: Required: SMAW 3-G or 3-F Uphill Progression (D1.1). Meet current ALSDE CTE Basic Skills (ACT WorkKeys) requirements, unless exempt: Applied Math - Level 4. Workplace Documents - Level 4. Business Writing - Level 3. Successfully complete all Alabama educator certification, fingerprint/background clearance, and other ALSDE certification requirements.
NewNCCER Structural Welding - Afternoon Class Starting August 24, 2026 AIDTNCCER Structural Welding - Afternoon Class Starting August 24, 2026Mobile, AlabamaSMAW Electrodes (29108): Describes the SMAW electrode classification system and how to select the proper electrode for the task. COURSE DESCRIPTION: Welding Safety (29101) : Covers safety equipment, protective clothing, and procedures applicable to the cutting and welding of metals.
NCCER Structural Welding - Night Class Starting August 17, 2026 AIDTNCCER Structural Welding - Night Class Starting August 17, 2026Mobile, AlabamaSMAW Electrodes (29108): Describes the SMAW electrode classification system and how to select the proper electrode for the task. COURSE DESCRIPTION: Welding Safety (29101) : Covers safety equipment, protective clothing, and procedures applicable to the cutting and welding of metals.
NCCER Structural Welding Morning Class - Starting August 17, 2026 AIDTNCCER Structural Welding Morning Class - Starting August 17, 2026Mobile, AlabamaSMAW Electrodes (29108): Describes the SMAW electrode classification system and how to select the proper electrode for the task. COURSE DESCRIPTION: Welding Safety (29101) : Covers safety equipment, protective clothing, and procedures applicable to the cutting and welding of metals.
Pipe Welding Instructor - Austal General Dynamics CorpPipe Welding Instructor - AustalMobile, ALThe instructor will be part of a team, responsible for the training of supplier staff in various courses related to various structural welding processes and wire types, as well as additional welding related courses. Focus Factory Training (D794) is currently looking for an organized, self-motivated Pipe Welding Instructor for onsite support for strategic sourcing initiatives at the Mobile, AL Focus Factories.
Pipe Welding Instructor Austal Electric Boat CorpPipe Welding Instructor AustalMobile, ALThe instructor will be part of a team, responsible for the training of supplier staff in various courses related to various structural welding processes and wire types, as well as additional welding related courses. Focus Factory Training (D794) is currently looking for an organized, self-motivated Pipe Welding Instructor for onsite support for strategic sourcing initiatives at the Mobile, AL Focus Factories.
Pipe Welding Instructor - Austal General Dynamics Electric BoatPipe Welding Instructor - AustalMobile, AlabamaFull timeOverview: Focus Factory Training (D794) is currently looking for an organized, self-motivated Pipe Welding Instructor for onsite support for strategic sourcing initiatives at the Mobile, AL Focus Factories. The instructor will be part of a team, responsible for the training of supplier staff in various courses related to various structural welding processes and wire types, as well as additional welding related courses.
AWS Certified Welding Inspector HRV CONFORMANCE VERIFICATION ASSOCIATES, INCAWS Certified Welding InspectorMobile, ALWe are leading experts in materials quality assurance and quality control inspection, construction management and construction inspection focused on delivering cost-effective services and solutions to transportation, rail & transit, power, commercial, and water/wastewater markets worldwide. Physical Requirements: Physical activity includes: climbing, balancing, kneeling, crouching, reaching, walking, grasping, talking, hearing, and standing for sustained periods of time.
Marine Welder AAA USAMarine WelderMobile, Alabama$29–$36About AAA USA: AAA USA is an in-situ manufacturing company that offers specialized subcontracting and technical assistance services related to industrialization, production and supplier monitoring processes in the Aerospace and Transportation sector. Our In-situ approach that focuses on productivity, on-time delivery, quality and efficiency has given us a leading position at our clients’ facilities and operations.
Marine Pipe Welder AAA USAMarine Pipe WelderMobile, Alabama$29–$37About AAA USA: AAA USA is an in-situ manufacturing company that offers specialized subcontracting and technical assistance services related to industrialization, production and supplier monitoring processes in the Aerospace and Transportation sector. Our In-situ approach that focuses on productivity, on-time delivery, quality and efficiency has given us a leading position at our clients’ facilities and operations.
NewEntry Level welder Savard GroupEntry Level welderMoss Point, MSWeld TestCandidates must successfully complete: Written welding test. Identify and follow the appropriate Welding Procedure Specification (WPS).
Welder MYER Companies, LLCWelderMobile, AL$25–$35You must demonstrate mastery by passing our rigorous all-position 3G FCAW/GMAW and 6G GTAW multi-pass single-V groove weld Welder Performance Qualification Test with Visual Examination and Guided Bend Testing per AWS D1.1. Founded on INTEGRITY, INGENUITY, & DEDICATION, and led by the dynamic Myer family (David, Brandon, and Bradley), we've grown to 200+ strong teammates who are changing the game in metal fabrication, machining, and field services across multiple industries.
Pipe Welder Sparta NetworkingPipe WelderPascagoula, MSSparta Networking is seeking experienced Pipe Welders to support shipbuilding and marine production operations in Pascagoula, Mississippi. The ideal candidate will have pipe welding experience, strong attention to quality, and the ability to work safely in a production setting.
A Class Structural Welder Austal LtdA Class Structural WelderMobile, ALQUALIFICATIONS / KNOWLEDGE / EXPERIENCE: • High level of pride in workmanship • Ability to weld in uncomfortable positions where applicable • Minimum of 1 year as a B-Class Welder at Austal producing advance fillet welds or 2 years of GMAW MIG welding experience at a comparable employer • Ability to pass A Class skills evaluation test to demonstrate welding ability for full penetration joint details • Ability to successfully complete onboarding procedures in preparation to pass AL CV weld qualification test requirements to meet contract requirements for A Class welding on the vessel • Demonstrated ability to weld fillets for material thicknesses 4mm- 25mm • Demonstrated ability to weld gusset toe and wraps with minimal blending required • Demonstrated ability to weld frame wraps and terminations with minimal blending required • Demonstrated ability to weld T-Bar wraps and terminations with minimal blending required • Demonstrated ability to weld into corners / vertical intersections with minimal blending required • Demonstrated ability to evaluate and correct basic weld pick up, with minimal supervision • Demonstrated ability to terminate stich welds with minimal weld correction to address minor cosmetic or weld defects • Demonstrated ability to weld continuously for 400mm • Demonstrated ability to back step and sequence weld based upon provided information and/or good welding practices • Demonstrated ability to weld multi-pass fillets with only cosmetic correction required • Ability to take direction and follow instructions • Good mechanical aptitude with ability to produce consistent quality • Ability to inspect and correct basic weld pick-up without supervision • Good listening and verbal communication skills • Ability to work independently and as part of a team • Problem-solving and trouble-shooting skills • Excellent hand-eye coordination; good spatial orientation • Ability to consistently meet production deadlines • Ability to read and interpret and work from construction drawings, job specifications, instruction manuals, manufacturer's handbooks, change orders and contract specifications to obtain weld sizing information and material edge preparation requirements • Ability and willingness to work with and to teach less-skilled workers • Ability to maintain and perform routine preventive maintenance on welding equipment • Ability to wear required PPE. RESPONSIBILITIES / AUTHORITIES: • Working in compliance with all safety, quality, environmental and health requirements, weld a variety of configurations including, but not limited to: • Single-pass and multi-pass fillets in all positions, for all joint and material thickness configurations • Multi-pass full penetration joint details, for all joint and material thickness configurations.
Manufacturing Welder Slb NVManufacturing WelderMobile, ALSLB is seeking a proactive and highly driven individual to join our operations as a Manufacturing Welder at our facility in Mobile, AL, responsible for weld preparation, welding, and weld finishing to manufacture products according to drawings, specifications, and other forms of instruction. CALIFORNIA APPLICANTS ONLY: I understand the Company may obtain, without using the services of a third party investigative consumer reporting agency, public records pertaining to my character, general reputation, personal characteristics, or mode of living during its evaluation of my application for employment and, if employed, during my employment.
Structural Welder Sparta NetworkingStructural WelderPascagoula, MSThe right person welds clean, code-quality joints and thrives in a busy production shipyard. Sparta Networking is hiring Structural Welders for shipbuilding and marine production in Pascagoula, Mississippi.
A Class Pipe Welder Austal LtdA Class Pipe WelderMobile, ALWhile performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear. Ability to successfully complete onboarding procedures in preparation to pass 6GR weld qualification test requirements for copper nickel, carbon steel and stainless steel to meet contract requirements for A Class welding on the vessel.
NewFitter/Welder AAA USAFitter/WelderMobile, Alabama$42–$50has partnered with a company in Portland, Oregon that is the premiere West Coast shipyard for building large Jones Act compliant articulated tug barges, deck barges, dump scows, oil spill recovery vessels, crane barges hopper barges and more. About AAA USA: AAA USA is an in-situ manufacturing company that offers specialized subcontracting and technical assistance services related to industrialization, production and supplier monitoring processes in the Aerospace and Transportation sector.
Welder III Chart Industries IncWelder IIIALWelds on various materials in required positions using multiple welding processes-including, but not limited to: GTAW, SMAW, FCAW, GMAW, and SAW- to fabricate piping as designed, (Note: pipe work comprises a small percentage of daily tasks; other welding assignments will be expected as needed.). While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear.
Welder Fitter Vessel Support Austal LtdWelder Fitter Vessel SupportMobile, ALWhile performing the duties of this job, the employee is regularly required to stand, walk, use hands to manipulate, handle, or feel, reach with hands and arms, climb and balance, stoop, kneel, crouch, or crawl, and talk or hear. Supports all other Site Services activities as required including but not limited to moving equipment, moving material, moving furniture, cleaning the site, cleaning the vessel, lawn and landscaping services, etc.
Pipe Welder West Hill Staffing GroupPipe WelderPascagoula, MSTypes of metal materials with a variety of welding processes; the most basic of which are, Shielded Metal Arc Welding (SMAW) also known as "stick welding” and Flux-Core Arc Welding (FCAW) also known as “wire welding.”. A Pipe Welder is responsible for performing pipe welding procedures on Stainless Steel and Copper-Nickel pipe using Gas tungsten arc welding (GTAW), also known as tungsten inert gas (TIG) welding.
NewAluminum Welder Advanced Technical Staffing SolutionsAluminum WelderTheodore, AL$20–$30 / hourWelder Level 3 Has nominal aluminum welding experience or passed the AIDT welding course. Welder level 1 Every skill set from Welder Level 2. Proficient in Pulse aluminum GMAW and or GTAW.
Entry Level Welder Fitter Savard GroupEntry Level Welder FitterMoss Point, MSKey Requirements:Minimum 1-2 years of Welder Fitter or Structural Fitter experience or recent welding graduate. We are currently seeking experienced Welder/Fitters to join a busy shipyard operation in Moss Point, MS.
Welder The Hiller CompaniesWelderMOBILE, ALInstallation of fire suppression system components as per the engineered drawings, including FM-200 and other clean agents, Fixed CO2 and Halon Systems, Galley Suppression Systems without constant supervision. Job Responsibilities: Operate welding equipment and machinery, such as arc welders, MIG welders, TIG welders to fuse metal components.
First Class Structural Welder Craft and Technical Solutions LLCFirst Class Structural WelderMobile, ALMust have a thorough knowledge of various metals characteristics and qualities including the correct welding processes required and the effects of welding on the material. We are currently in need of 1st Class Marine Structural Welders to join our team in Mobile, AL.
Welder Sulzer LtdWelderMobile, ALAbility to learn and pass various weld certification test (s), Ability to read and interpret drawings and blueprints, apply knowledge of weld rods, weld wire, weld equipment settings and basic math skills. Possess basic hand tools, basic precision measuring tools and proper safety shoes and attire as specified by a minimum tool requirements list specific to the facility requirements.
Ironworker/Welder Elevate Workforce IncIronworker/WelderALRequirements: • Proven experience as an Iron Worker and/or Structural Welder • Ability to read blueprints and structural drawings • Experience with common welding processes (MIG, FCAW, Stick) • Comfortable working at heights and in outdoor environments • Willingness to travel when project needs require • Strong work ethic, reliability, and attention to detail. Job Responsibilities: • Perform structural welding on steel and iron components • Erect, align, and secure structural steel • Read and interpret blueprints, drawings, and weld symbols • Perform layout, fitting, and fabrication as required • Use hand and power tools safely and efficiently • Follow all safety regulations and job-site procedures.
NewStructural Welder Chart Industries IncStructural WelderALPHYSICAL DEMANDS: While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; stoop, kneel, crouch, or crawl; and talk or hear. Must pass 3G weld test and other weld tests including square butt, fillet, and groove joints depending on specific job requirements.