200 Results for

Winter Production Jobs in New York

Jobs

West Milton, NY26 days ago

$95,700–$149,600 Per Year

Bachelors degree from an accredited college or university in a related technical, engineering or science field and a minimum of 6 years of relevant experience; or Masters degree from an accredited college or university in a related technical, engineering or science field and a minimum of 4 years of relevant experience; or Doctorate degree from an accredited college or university in a related technical, engineering or science field and a minimum of 1 year of relevant experience; or Currently a Senior Reactor Training Engineer, Refueling Engineer, or Field (RPCO) Engineer at the Company. Naval Nuclear Laboratory personnel are FMP employees who work at four DOE facilities: Bettis Atomic Power Laboratory, Knolls Atomic Power Laboratory, Kenneth A. Kesselring Site, and Naval Reactors Facility, and at the U.S. Department of Defense-owned Nuclear Power Training Unit-Charleston.

New!

Rome, NY3 days ago

$85,000–$85,000 Per Year

Bachelor or Master’s Degree in an Engineering related field with at least (5) years of experience, or an Associate’s Degree in an Engineering Technology related field with at least (10) years of verifiable experience in a Manufacturing environment, or at least (15) years of verifiable experience in a Manufacturing environment with a HS Diploma or equivalent. BARTELL MACHINERY SYSTEMS, L.L.C. is a global leader in providing highly engineered industrial manufacturing equipment for the Tire & Rubber, Oil & Gas, and Wire & Cable industries with a commitment to innovation and customer satisfaction.

New!

Glens Falls, NY3 days ago

$16–$23.25 Per Hour
Full-time

Set up and adjust equipment as trained to do within the scope of the position; defer complex setup and troubleshooting to Machine Operators, Machine Shop, and Maintenance Technician personnel as directed by supervisor. Medline Industries, LP, and its subsidiaries, offer a competitive total rewards package, continuing education & training, and tremendous potential with a growing worldwide organization.

New!

Glens Falls, NY3 days ago

$16–$23.25 Per Hour
Full-time

Set up and adjust equipment as trained to do within the scope of the position; defer complex setup and troubleshooting to Machine Operators, Machine Shop, and Maintenance Technician personnel as directed by supervisor. Follow proper procedures involving a broad range of components which requires one or more of the following: bonding, assembling, packaging, sealing or operating equipment per specifications.

New!

Schenectady, NY2 days ago

$43–$48 Per Hour

Work with Manufacturing and Engineering teams to develop and revise effective procedures that comply with ISO 9001:2015 QMS requirements while maintaining lean operations. Responsibilities of the Manufacturing Quality Engineer Job in Schenectady, NY:With support from internal and external expertise, develop, implement and maintain a certified QMS to ISO 9001:2015.

New!

Hauppauge, NY2 days ago

Owego, NY10 days ago

$20–$25 Per Hour

Working inside of PLM systems, solving cross-site data errors; Providing feedback to strengthen database automation, increasing synergy across teams and sites; Training new engineers, metric generation, and data stewardship. This position is responsible for maintaining and updating Manufacturing Bills of Material (MBOMs) and Material Master (MM) attributes in our Product Lifecycle Management (PLM) software (PTC Windchill).

New!

La Fayette, NYToday

$20.14–$27

Throughout our process you could use various equipment, such as computers, robots, metal shear, injection mold machines, hydraulic press, plasma torch, grinders, cut-off saw, cranes and forklifts. We are an investment casting foundry for the aerospace and defense industry creating parts for jet engines, wind and gas turbines, and other critical aerospace components.

East Aurora, NY12 days ago

$85,000–$95,000 Per Year
Full-time

Understanding the impact of programmed tool path, therefore proven experience machining parts from start to finish using manual turning and milling operations is highly desirable. Provide up-to-date CNC programs, posted code (manuscript), set-up documentation, and tooling information (tool list, tool offset values, etc.) for CNC machined operations.

Syracuse, NY11 days ago

$40,000–$60,000
Full-time
Employee

Our workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. When extending an offer, HII's Mission Technologies division takes a variety of factors into consideration which include, but are not limited to, the role's function and a candidate's education or training, work experience, and key skills.

Syracuse, NY11 days ago

$84,084–$120,000
Full-time
Employee

5 years relevant experience with Bachelors in related field; 3 years relevant experience with Masters in related field; 0 years experience with PhD or Juris Doctorate in related field; or High School Diploma or equivalent and 9 years relevant experience. Our capabilities in cybersecurity, network architecture, reverse engineering, software and hardware development uniquely enable us to support sensitive missions for the U.S. military and federal agency partners.

Smithtown, NY30+ days ago

Key responsibilities/essential functions include: Follows work procedures and schematics including complex instructions regarding duties to be performed Performs manufacturing/assembly operations and various tasks following procedures, bills of materials, work instructions, and process aid sheets Assists in the writing and/or developing of work procedures Works independently and completes basic troubleshooting Maintains daily production output Follows all EHS and Quality policies and procedures Participates in quality control inspections when required Works with team leaders, engineers, supervisors, and managers to improve quality and process efficiency Other duties as assigned, and may be asked to be included in quality activities, training sessions, and employee activity teams Performing more advanced and complex assembly and testing when required Trains other team members when required Comply with EHS regulations and policies Required Qualifications: High School Diploma/GED or local equivalent 3 or more years of related manufacturing experience Ability to communicate, receive and understand instructions regarding duties to be performed Demonstrated ability to detail and quality-minded work habits Demonstrated ability to communicate with co-workers and leadership The production associate (Mid Level) may have responsibilities including manufacturing, assembly, basic testing, packaging and shipping of products.

Rochester, NY17 days ago

$55,000–$65,000

Computer controlled processes, operators and technicians with decades of experience, and strict procedures for quality control have led Cannon Industries to step ahead of the competition, by earning ISO:9002, ISO:14001, and TS:16949 certifications. Voice all concerns while working with production staff, Quality Assurance, Engineering and Operations any and all current or potential problems affecting production.

Mamaroneck, NY30+ days ago

$40–$50 Per Hour

All inquiries about employment at this shop should be made directly to the shop location, and not to Elite Worldwide Corporate. If you want a place where you’re respected, paid properly, and don’t hate coming in every day—this is it.

Rochester, NY10 days ago

$25–$26 Per Hour

Clear roles, competitive pay ranges, and a place to sharpen your craft while contributing to quality output every day. A & B Shift – 8 Openings | Up to $25.00 – $26.00/hr (top operators) Load/unload parts, monitor machines, and maintain throughput.

Lancaster, NY30+ days ago

$39,520–$52,000

Complete cross-training initiatives across multiple work areas/processes to be able to support production needs across the entire facility. As a Production Worker, you will be responsible for contributing to the fabrication and distribution processes of high-quality products.

Seneca Falls, New York17 days ago

$93,400–$139,400 Per Year
Full-time

Our leading brands include the iconic Goulds Pumps (with more than 175 years of history), Anhydro, APV, Bornemann, Bran+Luebbe, C’treat, Engineered Valves, Gerstenberg Schröder, Habonim, Johnson Pump, Lightnin, Philadelphia, Plenty, PRO Cast, Rheinhütte, Seital Separation, Stelzer, Svanehøj, Tigerholm, Uutechnic, VIDAR, Waukesha Cherry-Burrell. Through operational execution, innovation, and disciplined capital deployment, including strategic acquisitions such as SPX FLOW, ITT partners with its customers to deliver enduring solutions to the key industries that underpin our modern way of life.

New!

Canandaigua, NY4 days ago

$22–$38 Per Hour

The job requires you to work independently but involves frequent interaction with Akoustis Engineers and Operations in a dynamic and fast-paced environment, where you are challenged with running multiple processes in a high-mix environment, identifying problems with equipment, and supporting experiments for process improvements and new process development for new product introductions and new equipment qualifications. Akoustis is now operating as a wholly owned subsidiary of SpaceX providing industry leading RF filters using patented XBAW technology to help drive the mission of making human life multi-planetary, while also connecting the world through Starlink.

Endicott, NY30+ days ago

$70,000–$85,000 Per Year

Our portfolio of brands includes Oldcastle APG, Oldcastle Infrastructure, Belgard® hardscape, Echelon® Masonry, RDI® railing, Catalyst™ Fence Solutions, Sakrete® packaged concrete, Amerimix® mortar, Pebble Technology International® pool finishes, and Techniseal® sands and sealant technologies. We're a trusted and strategic partner to engineers, contractors, distributors, specifiers, retailers, and homeowners alike as the manufacturer of precast concrete, polymer concrete, and plastic infrastructure products.

Orchard Park, New York28 days ago

$93,400–$139,400 Per Year
Full-time

Our leading brands include the iconic Goulds Pumps (with more than 175 years of history), Anhydro, APV, Bornemann, Bran+Luebbe, C’treat, Engineered Valves, Gerstenberg Schröder, Habonim, Johnson Pump, Lightnin, Philadelphia, Plenty, PRO Cast, Rheinhütte, Seital Separation, Stelzer, Svanehøj, Tigerholm, Uutechnic, VIDAR, Waukesha Cherry-Burrell. Review business strategy, demands, operational budgets and reports to provide innovative solutions for improvements using lean principles to enhance productivity while collaborating and assisting leadership and key members in the area.

Buffalo, New York30+ days ago

General Mills, Inc. manufactures some of the most beloved foods in the world, including Cheerios and Lucky Charms, Nature Valley granola bars, Totino's pizza rolls, and Yoplait yogurt. Ability to wear protective clothing and equipment such as safety shoes, face masks, safety glasses, hearing protection, a hard hat, a hair/beard net and gloves when required.

Brooklyn, NY18 days ago

$20–$24

Experience in signs, manufacturing, engraving, fabrication, or production is a plus, but we are willing to train the right person with the right attitude. Right now this department is extremely busy, and we are looking to hire quickly to help support production and reduce backlog.

New!

Canandaigua, NY4 days ago

$22–$38 Per Hour

Buffalo, NY30+ days ago

Full-time

Physical Requirements/Abilities (If necessary): Position requires good manual dexterity, fine motor skills, visual acuity, spatial awareness, proficiency in using hand tools and equipment. Our Trust Charter is our Code of Conduct and demonstrates our commitment to ethics, safety, sustainability, quality and cybersecurity, underpinning every aspect of our business and our willingness to behave and respond respectfully and in good faith to all our stakeholders.

New York, NY30+ days ago

Remote

$55,000–$55,000

Key tasks will include highly organized administration of all aspects of live event production, such as managing A/V teams on visual and audio production needs, review and management of rental orders, vendor requirements, and temporary staff hiring, creation of venue layouts and detailed run-of-show schedules, and other responsibilities required to ensure a successful conference, as well as diligent and responsive administration of sponsor deliverables such as advance materials, shipping of display items, and presentation media. This is a perfect job for someone based in the broader NYC area with experience and skill producing complex events such as corporate or marketing events, executive gatherings, festivals, or arts events, looking for a long term stable role helping create amazing event experiences on a healthy schedule during daytime business hours.

New!

Depew, NY4 days ago

$19.45–$26.75 Per Hour

PCB manufactures sensors used by design engineers and predictive maintenance professionals to test and measure vibration, pressure, force, acoustics, load and shock for test, measurement, monitoring and control requirements. Works with other technicians, engineers and departments to verify existing and assist in creating new processes, assembly methods, sensor technology, and assembly procedures.

Brockport, NY30+ days ago

$18.55–$19.55 Per Hour

Completes grade/audit of all product lines running at intervals not to exceed 30 minutes unless authorized by Quality Assurance Supervisor. Communicates to Production Shift Supervisor or Quality Group Leader as to when product must be held, or when further lot weight verification is required.

Endicott, NY30+ days ago

$70,000–$85,000 Per Year

National Pipe & Plastics, a CRH company, is one of North America’s largest PVC pipe producers, serving the water and energy markets from two east coast locations in Endicott, NY, and Greensboro, NC. Tracks productivity for measured efficiency and improvement and operates at or below the budgeted cost for production utilizing lean manufacturing procedures and cross training.

Niagara Falls, NY7 days ago

Performs a variety of electronic or electro-mechanical assembly tasks in support of specific production units, developmental or prototype requirements in product development, manufacturing engineering or preproduction operations where documentation and guidance may be limited. • Experience in using a Microscope to assemble miniature parts into assemblies • IPC J-STD-001 solder certification.

Syracuse, NY9 days ago

$35–$41.50

In this role, you will develop and maintain Manufacturing Bills of Materials (BOMs), create process instructions, and support manufacturing operations by ensuring production processes, documentation, and procedures are accurate, compliant, and efficient. This is a 12-month contract (extensions likely), 40-hour-per-week role (Mon-Thu 9 hours (7:00 Am to 4:30 pm) and 4 hours Friday (7:00 am to 11:00 am)), and this is an Onsite role in Syracuse, NY.

Garden City, NY11 days ago

$65.33–$90 Per Hour

Location: Garden City, NY Zip code: 11530 Start Date: Immediate Contract: 6 Months Tags: #ToolingDesignjobs; #ManufacturingEngineerjobs; #GardenCityjobs; Job Overview: We are rapidly scaling a new, innovative technology from R&D into production. We are seeking an experienced Tooling Design / Manufacturing Engineer to lead the design and development of precision tooling required to manufacture this new product at scale.

Buffalo, New York30+ days ago

$115,000–$145,000 Per Year

ManufacturingEngineer #CNC #5AxisMachining #CNCMachining #CADCAM #NXCAM #AerospaceJobs #AerospaceEngineering #PrecisionMachining #LeanManufacturing #DFM #ContinuousImprovement #EngineeringJobs #BuffaloNYJobs #NewYorkJobs #NowHiring #Machining #AdvancedManufacturing #SkilledTrades #CareerOpportunity. This is a high-impact, hands-on role where you'll lead manufacturing process development, optimize production, and work directly with 5-axis CNC machining to drive precision and performance.

Syracuse, NY8 days ago

ManufacturingEngineer #ManufacturingJobs #IndustrialEngineering #MechanicalEngineering #BOMDevelopment #ProcessEngineering #ProductionEngineering #ManufacturingProcesses #ProcessInstructions #EngineeringJobs #ManufacturingCareers #IndustrialExperience #CADDesign #ProductionSupport #CrossFunctionalTeams #USCitizenJobs #SyracuseNYJobs #NYJobs #ContractJobs #W2Jobs #FirstShiftJobs #EntryLevelEngineering #MechanicalEngineer #IndustrialEngineer #HiringNow #EngineeringOpportunity #ManufacturingIndustry #STEMJobs #AerospaceManufacturing #LeanManufacturing. It's possible that it will evolve later to include designing manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.

New York, New York30+ days ago

Remote

$45–$65 Per Hour

Include design reviews, DFMEA / PFMEA documents, PPAP packages, tolerance analyses, benchmarking decks, test reports, and email threads. Work asynchronously with research teams to refine task designs and evaluation criteria for automotive engineering agent benchmarks.

New York, New York30+ days ago

Remote

$45–$65 Per Hour

Croton-on-Hudson, NY30+ days ago

Full-time

This is an excellent opportunity for a hands-on, self-directed individual to play a key role in optimizing manufacturing processes, improving efficiency, and supporting continuous improvement initiatives across machining and production environments. A stable and reputable manufacturing company is seeking a Manufacturing Engineer to support and improve production operations.

Mt Vernon, IN30+ days ago

$76,000–$119,000 Per Year

BWX Technologies, Inc. and its affiliates and subsidiaries (BWXT) is not responsible for and does not accept any liability for fees or other costs associated with resumes or candidates presented by recruiters or employment agencies, unless a binding, written recruitment agreement between BWXT and the recruiter or agency exists prior to the presentation of candidates or resumes to BWXT and includes the specific services, job openings, and fees to be paid (“Agreement”). Your experience will be beneficial as you interface with both Design and Manufacturing Engineering teams to effectively manage changes to component designs and support quotes for new work by reviewing technical requirements and preparing precise person-hour estimates.

Salina, NY30+ days ago

Full-time

Lead by example to help strengthen accountability, professionalism, and continuous improvement culture. Lead improvements in productivity by recommending staffing efficiency and machine utilization.

New!

Victor, New York2 days ago

The wage range for this role takes into account the wide range of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; licensure and certifications; and other business and organizational needs. We're on the cutting edge of manufacturing and distribution; a thriving, growing company that is constantly seeking out new ways to innovate and elevate our products and our processes - and we're looking for people like you to join us in that mission.

Horseheads, NY30+ days ago

The Manufacturing Engineering Technician supports engineering and production teams by assisting with the development, testing, implementation, and maintenance of manufacturing processes and systems in a heavy manufacturing environment. This role plays a key part in improving efficiency, quality, and safety on the production floor while ensuring that equipment, tools, and systems operate at optimal performance levels.

New!

Buffalo, NY3 days ago

Base Salary - USD $80,000 to $120,000*** Never repost ***Full-timeBenefits - FullRelocation Assistance Available - YesCommission Compensation - NoBonus Eligible - NoOvertime Eligible - NoInterview Travel Reimbursed - YesCandidate DetailsSeniority Level - AssociateManagement Experience Required - NoMinimum Education - Bachelor's DegreeWillingness to Travel - OccasionallyIdeal Candidate. To be considered for this role, typically you ll bring: A bachelor s degree in a technical field with 3+ years of relevant professional experience, or an associate degree with 6+ years of relevant professional experience, or a High School Diploma/GED with 8+ years of proven professional experience.

East Farmingdale, NY30+ days ago

$18–$20 Per Hour

Over 95 years of growth, Curtiss-Wright is an integrated, market-facing global diversified industrial company and remains a technology leader through this legacy of innovation. Agency partners must be invited to participate in a search by our_ _Talent Acquisition Team (TA_COE@curtisswright.com)_ _and have signed terms in place prior to any submittal.

New!

Croton-on-Hudson, New York3 days ago

$75,000–$90,000 Per Year

This is an excellent opportunity for a hands-on, self-directed individual to play a key role in optimizing manufacturing processes, improving efficiency, and supporting continuous improvement initiatives across machining and production environments. Analyze production data to identify and resolve process inefficiencies, bottlenecks, and quality issues .

New!

Seneca Falls, New York5 days ago

$77,200–$115,400 Per Year
Full-time

Liverpool, NY10 days ago

$37.76–$40 Per Hour

Inspects performance of machinery, equipment, and tools to verify their efficiency, and investigates and initiates corrective action of problems and deficiencies to ensure product quality. Responsibilities:Designs manufacturing processes, procedures and production layouts for assemblies, equipment installation, processing, machining and material handling.

Rochester, NY30+ days ago

Full-time

The Lead Manufacturing Engineer plans, directs, and coordinates the activities of the manufacturing engineering operations across the facility, managing a team of 3 engineers, working closely with other departments such as production, facilities, QA and supply chain. This roles ensures documentation and development of efficient processes, identification and implementation of cost reduction opportunities, the design and selection of test equipment, capital equipment, and the handling of personnel issues.

Plattsburgh, NY30+ days ago

$60–$65

Must Have: Manufacturing and Electrical Engineering and Production support or Methods or PME and Catia V5 and MOD and work Instructions or Assembly books and Railway or Rail or Train or Rolling Stock or Locomotive or Metro and Alstom or Bombardier or Siemens or KB or Wabtech Rail or Hitachi Rail or Aero. Hands on experience on Catia V5 (expert level), 3D-COM / ENOVIA, PDM, SAP VSM, SAP GSI.

Auburn, NY30+ days ago

$55,000–$75,000 Per Year

AVStar Fuel Systems is a leader in the design, manufacture, and overhaul of carburetors and fuel injection systems for general aviation piston aircraft. Create CNC programs (ESPRIT), develop setup documentation, collaborate with Engineering and Quality, and drive continuous improvement initiatives.

Cortland, New York27 days ago

$86,330–$129,500 Per Year

Enerpac Tool Group’s businesses are global leaders in high pressure hydraulic tools, controlled force products, and solutions for precise positioning of heavy loads that help customers safely and reliably tackle some of the most challenging jobs around the world. The company applies over 40 years of experience in textile engineering and advanced fabric design methods to braid, knit and woven products that meet the demands of a diverse set of customers in the biomedical product space.

North Chili, NY30+ days ago

Familiarity with CAD/CAM software (Cadkey, Autocad, Key Creator, Solid Works) is required. Confers with management, engineering, and other staff regarding manufacturing capabilities, production schedules, and other considerations to facilitate production processes.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to Winter Production job opportunities. Plus, receive relevant job recommendations in your inbox.

Create A Free Account

Winter Production Jobs in New York

Senior Manufacturing Engineer Naval Nuclear Laboratory

Manufacturing Engineer Bartell Machinery Systems LLC

Production Associate - 1st, 2nd or 3rd shift Medline Industries

Production Associate - New PMM Machine (1st, 2nd & 3rd shift) Medline Industries

Manufacturing Quality Engineer Nesco Resource

CNC Programmer Davron LLC

Manufacturing Planner First Tek, Inc (a Cenergy International Services, Inc. Company)

Entry Level Aerospace Manufacturing (CPP Syracuse) Consolidated Precision Products

Manufacturing Engineer Rand Machine

Manufacturing Assembly Technician Company Confidential

Manufacturing Quality Engineer - 27060 Company Confidential

Manufacturing - Associate - Production (Mid Level) TechDigital Corporation

Manufacturing and Production Engineer Cannon Industries

Automotive Production Technician Motorwerks inc

High-Precision Machining, Quality Inspection & Production Careers TekPro Engineering

Production Worker $19-$25 Manufacturing 2nd shift Parallel Employment

Supervisor, Production ITT Inc. - English US

Production Technician (Starlink/ Akoustis) - Canandaigua NY National Guard Employment Network

Production Supervisor IPG NPP/IPG Plastic

2nd Shift Production Supervisor ITT Inc. - English US

Seasonal Production Operator General Mills

ADA Production Technician / Manufacturing Team Member CAB Signs

Production Technician (Starlink/ Akoustis) - Canandaigua NY VetJobs

Manufacturing Production Supervisor, 1st Shift Schneider Electric USA, Inc

NYC Area-based Event Production Asst. From Day One, Inc.

Production Technician III PCB Piezotronics

Production Quality Associate - Food Manufacturing Datrose, Inc

Production Supervisor (PVC Pipe/Extrusion) CRH Americas

Production Technician - Assembly NESCO Rentals

Manufacturing Engineer – (Syracuse, NY) Stage 4 Solutions Inc

Tooling Design/ Manufacturing Engineer Belcan

Senior Manufacturing Engineer – 5-Axis CNC Milling Northwest Talent Solutions LLC

Manufacturing Engineer Trispoke managed services

Advanced Manufacturing Engineer Mercor

Senior Manufacturing Engineer - AI Trainer Mercor

Manufacturing Engineer machining CNC VisionsHR

Manufacturing Engineer - Weekend Shift BWXT

Manufacturing Engineer Metasys Technologies, Inc.

Manufacturing Engineer Co-Op Gorbel

2nd Shift Manufacturing Engineering Technician Top Gun Staffing Inc

Manufacturing Engineer/CNC Programmer SOMERSET STAFFING

Manufacturing Engineering Intern Curtiss-Wright Corporation

Manufacturing Engineer Machine Shop CNC Donna Cornell Enterprises, Inc.

Manufacturing Engineer - CNC Programmer ITT Inc. - English US

Manufacturing Engineer Iconma

Lead Manufacturing Engineer AMETEK, Inc

Manufacturing Engineer Sapsol Technologies Inc

Manufacturing Engineer AVStar Fuel Systems, Inc.

Manufacturing Engineer II Enerpac Tool Group Corp

Manufacturing Engineer Gates Albert

Resume Resources