NewWelder and Fabrication Technician (1st Shift) Kimco StaffingWelder and Fabrication Technician (1st Shift)Anaheim, CAKimco Staffing is seeking experienced Welders / Fabrication Technicians to support a short-term manufacturing surge. Operate fabrication equipment (vertical band saws, grinders/sanders); maintain safe, clean workspace.
NewGeneral Helper (Scribe) - 1st Shift Kimco StaffingGeneral Helper (Scribe) - 1st ShiftOrange, CA$18–$19 / hourKimco Staffing Services is a rapidly growing, award-winning staffing firm whose purpose is to add real value to our clients and candidates while "Changing lives, One Job at a Time." If you have previous machine shop, material handling, assembly or general labor work experience and want to work with a company that is innovative and growing, this is the time to apply!
Engineering Process Technician - 1st Shift - Pay Starting at $32.22/hr. StrykerEngineering Process Technician - 1st Shift - Pay Starting at $32.22/hr.Irvine, CaliforniaHowever, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor’s legal duty to furnish information. This role provides hands-on technical support for manufacturing process development, equipment installation and validation, and documentation required to successfully launch and sustain production processes.
Microbiology Technician III- 1st Shift MedtronicMicrobiology Technician III- 1st ShiftSanta Ana, CaliforniaThe following benefits and additional compensation are available to those regular employees who work 20+ hours per week: Health, Dental and vision insurance, Health Savings Account, Healthcare Flexible Spending Account, Life insurance, Long-term disability leave, Dependent daycare spending account, Tuition assistance/reimbursement, and Simple Steps (global well-being program). If you are applying to perform work for Medtronic, Inc. (“Medtronic”) in any position which will involve performing at least two (2) hours of work on average each week within the unincorporated areas of Los Angeles County, you can find here a list of all material job duties of the specific job position which Medtronic reasonably believes that criminal history may have a direct, adverse and negative relationship potentially resulting in the withdrawal of a conditional offer of employment.
Microbiology Technician III- 1st Shift Medtronic PlcMicrobiology Technician III- 1st ShiftSanta Ana, CAThe following benefits and additional compensation are available to those regular employees who work 20+ hours per week: Health, Dental and vision insurance, Health Savings Account, Healthcare Flexible Spending Account, Life insurance, Long-term disability leave, Dependent daycare spending account, Tuition assistance/reimbursement, and Simple Steps (global well-being program). If you are applying to perform work for Medtronic, Inc. ("Medtronic") in any position which will involve performing at least two (2) hours of work on average each week within the unincorporated areas of Los Angeles County, you can find here a list of all material job duties of the specific job position which Medtronic reasonably believes that criminal history may have a direct, adverse and negative relationship potentially resulting in the withdrawal of a conditional offer of employment.
Plant Maintenance Technician-1st shift 5:00am-1:30pm TriMas CorpPlant Maintenance Technician-1st shift 5:00am-1:30pmCAJOB SUMMARY: Installs, maintains, and repairs machinery, tools, equipment, furnishing, fixtures, physical structures, and pipe and electrical systems using journeyman level skills in all the various crafts required to complete the essential functions of the job. Lays out, assembles, installs, and maintains pipe systems, including facility plumbing, and hydraulic and pneumatic equipment, and repairs and replaces gauges, valves, pressure regulators, and related equipment.
Assembler I 1st Shift Marquee StaffingAssembler I 1st ShiftIrvine, CA$19–$21Facilitating the manufacturing of insulin pump implants, this position will primarily perform precision assembly requiring, attention to detail, initiative, working well within a team, and ability to produce consistently high-quality results while using a microscope in a cleanroom environment. Ability to establish, build and maintain professional working relationships with all levels of staff, clients, and suppliers.
AI&T Technician, 1st Shift Canopy A&DAI&T Technician, 1st ShiftOntario, California$25–$32 / hourPerform assembly, integration, bonding, and testing operations on aerospace hardware and components• Execute builds in accordance with engineering drawings, work instructions, travelers, and process specifications• Support mechanical and electro-mechanical assembly activities using hand tools, fixtures, and specialized equipment• Assist with bonding, coatings, composites handling, and related manufacturing processes as required• Conduct inspections and basic functional testing to verify product quality and conformance• Maintain accurate production documentation and ensure traceability requirements are met• Identify and escalate nonconformances, material issues, or process concerns to leadership and Quality teams• Collaborate cross-functionally with Engineering, Manufacturing, and Quality to resolve production challenges• Support process improvements focused on efficiency, throughput, and quality enhancement• Maintain a clean, organized, and safety-compliant work environment• Assist with new product introduction (NPI) builds, prototypes, and process validation activities as needed• Support production schedules and delivery commitments in a fast-paced manufacturing environment Required Qualifications. • Experience supporting aerospace flight hardware or space-related programs • Familiarity with cleanroom or controlled manufacturing environments• Experience with composite materials, adhesives, coatings, or thermal protection systems• Ability to perform basic electrical or functional testing activities• Experience supporting prototype or new product introduction (NPI) builds• Lean manufacturing or continuous improvement experience• ERP/MRP system familiarity• Prior experience in a high-growth or startup manufacturing environment• Flexibility to support overtime or alternate shifts as production demands require Additional Requirements.
Test Engineer - 1st Shift Volt Information Sciences IncTest Engineer - 1st ShiftCOSTA MESA, CAVolt is immediately hiring aManufacturing Test Technician infor an Onsite role based in Costa Mesa CaliforniaAs a Manufacturing Test Technician you will Skills Perform detailed maintenance troubleshooting and repair of test fixture and equipment in accordance with Clients test engineering and quality procedures. Qualification Associate of ArtsScience in Electrical Engineering or Technology from a recognized College with four 4 years comparable experience Certificate of Completion from a recognized Technical Trade School or in process of attaining andor Advanced Military technical school plus four 4 years comparable work experience.
Assembly Technician- 1st Shift (Temp) CIRCOR International IncAssembly Technician- 1st Shift (Temp)Corona, CA$18.50–$19.50 / hourMay perform mechanical assembly which is typically highly complex and would be responsible for fitting, aligning or adjusting of components and/or assemblies to close tolerance. Have good manual dexterity and the ability to work with detailed blueprints, procedures, assembly sketches or other written/verbal instructions of simple complexity.
Production Lead - Portables 1st Shift Luxfer Gas CylindersProduction Lead - Portables 1st ShiftRiverside, CAFull timeSupervise production employee training to ensure all employees are properly trained and signed off to proper operations of machinery and equipment, performance of manufacturing and inspection processes, safety and quality requirements of each operation. Direct and train hourly employees in set-up and machine operation, 5S, lean concepts, manufacturing processes, inspection methods, quality requirements, and efficient production of high-pressure composite cylinders in a safe work environment.
Final Inspector 1st Shift Alicia CoronaFinal Inspector 1st ShiftBrea, California$25–$26 / hourConduct inspections on electrical or electronic components by using electrical meters or instruments to confirm adherence to electrical specifications. Ultimate Staffing Services is actively seeking an experienced Final Inspector for the 1st Shift in California.
Maintenance Mechanic 1st Shift J & J Snack Foods CorpMaintenance Mechanic 1st ShiftColton, CA$34–$37 / hourAs a leader and innovator in the snack food industry for over 50 years, J&J Snack Foods provides branded snack foods to foodservice and retail supermarket outlets across the U.S. Its products include such icons as SUPERPRETZEL, ICEE, and Dippin' Dots along with other key brands like LUIGI'S Real Italian Ice, The Funnel Cake Factory Funnel Cakes, and Hola Churros. ESSENTIAL FUNCTIONS: Limits downtime of equipment by performing inspections, documenting issues, creating parts lists and work-orders, and performing tasks to eliminate ongoing and repetitive issues.
Product Sup Coord Sr - Mat - 1st Shift - Military Flight Controls Division Parker Hannifin CorpProduct Sup Coord Sr - Mat - 1st Shift - Military Flight Controls DivisionIrvine, CA$26.65–$40.25 / hourParker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Headquartered in Irvine, California, the Military Flight Controls Division is the global leader in fly-by-wire flight control systems and electrohydraulic products and offers the world''s most advanced motor design capabilities for flight controls.
Production Lead - Portables 1St Shift Luxfer Holdings PLCProduction Lead - Portables 1St ShiftRiverside, CA$22.35–$27.86 / hourPOSITION PURPOSE: Direct and train hourly employees in set-up and machine operation, 5S, lean concepts, manufacturing processes, inspection methods, quality requirements, and efficient production of high-pressure composite cylinders in a safe work environment. Supervise production employee training to ensure all employees are properly trained and signed off to proper operations of machinery and equipment, performance of manufacturing and inspection processes, safety and quality requirements of each operation.
Production Lead - Portables 1st Shift Luxfer Holdings PLCProduction Lead - Portables 1st ShiftRiverside, CA$22.35–$27.86 / hourPOSITION PURPOSE: Direct and train hourly employees in set-up and machine operation, 5S, lean concepts, manufacturing processes, inspection methods, quality requirements, and efficient production of high-pressure composite cylinders in a safe work environment. Supervise production employee training to ensure all employees are properly trained and signed off to proper operations of machinery and equipment, performance of manufacturing and inspection processes, safety and quality requirements of each operation.
Now Hiring ! QC Receiving Inspector | $25 - $27/hr. | 1st Shift | 838355 HelpmatesNow Hiring ! QC Receiving Inspector | $25 - $27/hr. | 1st Shift | 838355Huntington Beach, CA$26–$27 / hourJoin a leading organization specializing in aviation quality assurance as a 1st Shift QC Receiving Inspector in Huntington Beach, CA and make an impact every day. Experience or familiarity with quality control in manufacturing or aerospace (raw materials, electrical components, machined parts, and/or injection molded products).
Document Control Specialist - 1st Shift Howmet Aerospace IncDocument Control Specialist - 1st ShiftFullerton, CA$25–$30 / hourTo learn more about the way Howmet Aerospace Inc. is advancing the sustainability of our customers, markets, and communities where we operate, review the 2025 Environmental Social and Governance report at www.howmet.com/esg-report. With $8.3 Billion in revenue in 2025, our products play a crucial role in enabling fuel efficiency and lightweighting, contributing to our customers' success and making a positive impact on the world.
Assembly Technician- 1st Shift (Temp) Circor CareersAssembly Technician- 1st Shift (Temp)CaliforniaMay perform mechanical assembly which is typically highly complex and would be responsible for fitting, aligning or adjusting of components and/or assemblies to close tolerance. Have good manual dexterity and the ability to work with detailed blueprints, procedures, assembly sketches or other written/verbal instructions of simple complexity.
Manufacturing Supervisor - 1st Shift Precision Castparts CorpManufacturing Supervisor - 1st ShiftIrvine, CA$87,500–$131,300 / yearLocation Profile: Headquartered in Irvine, CA, Shur-Lok manufactures fastening systems with superior locking devices for critical requirements, including engine module assembly, structural assembly, rotor blade attachment, and aircraft engine shaft and spindle applications. These include using company-provided personal protective equipment/supplies (i.e., safety glasses, hearing protection, safety shoes); maintaining a clean work area; operating equipment and using tools safely; correcting unsafe conditions or practices.