59 Results for

CNC Jobs in Tacoma, WA

Jobs

New!

Sumner, WA6 days ago

$30–$50 Per Hour

The CNC Machinist will lead the department and manufacturing of parts which include setting up, running, performing basic CNC Programming, and employee schedules. CNC Machinist Job Description: PrideStaff is working with a local machining company who is in search of a CNC Machinist to join their team.

Seattle, WA30+ days ago

Full-time
Employee

This role delivers complete manufacturing packages-including NC code, setup sheets, and simulation files-for 3-axis, 5-axis, and mill-turn machines. Job Description: We are seeking an advanced CNC Programmer to support our high-mix prototype and production shop.

Auburn, WA8 days ago

$63,274–$63,274 Per Year
Full-time
Employee

We are an experienced ISO 9001 & AS 9100 certified machine & fabrication shop looking for Journeyman Level CNC Machinists to run our CNC HAAS VF4, VF2, VF7, VF12, EC400, EC500 & UMC Auto Tourette mills. Responsible for setting-up and operating 3 & 4 & 5 axis mills & ability to debug, edit and run G-Code.

tacoma, WA28 days ago

$28–$35 Per Hour
Full-time
Employee

Maintains specifications by observing drilling, grooving, and cutting, including turning, facing, knurling and thread chasing operations; taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming controls; sharpening and replacing worn tools; adhering to quality assurance procedures and processes. * Programs mills and lathes by entering instructions, including zero and reference points; setting tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math, geometry, and trigonometry; proving part programs.

Seattle, WA30+ days ago

Full-time
Employee

and/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. To conform to U.S. Government commercial space technology export regulations, including the International Traffic in Arms Regulations (ITAR), 8 U.S.C. § 1324b(a)(3), applicants for employment at Blue Origin must be a U.S. citizen or national, lawfully admitted for permanent residence into the U.S. (i.e. current green card holder), or lawfully admitted as a refugee or granted asylum under 8 U.S.C. § 1157-1158.

Seattle, WA30+ days ago

Full-time
Employee

Fife, WA30+ days ago

$25–$40 Per Hour
Full-time
Employee

Job DescriptionAs a Lathe Machinist, you will play a pivotal role in ensuring the smooth and efficient operation of CNC and manual machining equipment. Additional Skills & QualificationsExperience with Okuma machines including Captain L370W, Impact LU15, and LB3000 base controls.

Kent, WA30+ days ago

$30–$45 Per Hour
Full-time
Employee

By applying, you consent to receive AI-generated and non-AI-generated calls, texts, or emails from Staffmark Group, its affiliates, and partners. At Staffmark, we connect hardworking people with great companies, creating opportunities that make a lasting impact.

Woodmont Beach, WA19 days ago

$32–$36.68 Per Hour
Full-time
Employee

Since 1946 Pacific Propeller has been providing global repair and overhaul services to regional aircraft, as well as many of the world’s military operators of large transport propeller aircraft. Clients throughout the world count on us because they know they receive superior expertise, honest scheduling and unsurpassed reliability in propeller support.

Tukwila, WA13 days ago

Full-time
Employee

At the highest level, they are capable of setting up and running all site-specific CNC and conventional machines, designing and manufacturing complex tooling, and mentoring junior machinists while contributing to continuous improvement initiatives. is the market leader in manufacturing large, complex structural investment castings, airfoil castings, forged components, aerostructures and highly engineered, critical fasteners for aerospace applications.

Puyallup, WA30+ days ago

$20–$40 Per Hour
Full-time
Employee

Our Mission Statement: “We positively impact people and our community by placing motivated qualified individuals at great places to work.”. American Workforce Group has partnered with an aerospace manufacturing facility in Puyallup, WA looking for a Machinist!

Seattle, WA30+ days ago

Full-time
Employee

Renton, WA10 days ago

Full-time
Employee

Prepare machine by reviewing work orders, blueprints, engineering plans, materials, specifications, orthographic drawings, reference planes, locations of surfaces, and machining parameters; interpreting geometric dimensions and tolerances (GD&T). Competent in basic math and algebra; using all units of measure, whole numbers, common fractions, and decimals; computing rate, ratio, and percent; drawing and interpreting bar graphs.

Bonney Lake, WA19 days ago

Full-time
Employee

The area of Materials Services spans two strategic areas: global materials distribution as one-stop-shop - from steel and stainless steel, tubes and pipes, nonferrous metals and specialty materials to plastics and raw materials - and tailored services in the areas of materials management and supply chain management. Operating from 35 service centers in 15 countries throughout the Americas, Europe and Asia Pacific enables us to aggregate demand across a single supply chain on behalf of the world's leading OEM's, while at the same time providing a truly responsive local service to meet the needs of individual subcontractors anywhere in the world.

Bonney Lake, WA30+ days ago

Full-time
Employee

As a contractor Numerical Control Programmer (NCP) on our Machining/Tooling team, you'll drive the NC programming, setup documentation, and machining strategy for complex multi-axis parts used on client commercial airplanes. This role is ideal for hands-on programmers who enjoy solving machining challenges, optimizing workflows, and seeing their programs executed on the shop floor.

Bonney Lake, WA30+ days ago

Full-time
Employee

As a contractor Numerical Control Programmer (NCP) on our Machining/Tooling team, you'll drive the NC programming, setup documentation, and machining strategy for complex multi-axis parts used on Client commercial airplanes. This role is ideal for hands-on programmers who enjoy solving machining challenges, optimizing workflows, and seeing their programs executed on the shop floor.

Seattle, WA30+ days ago

Full-time
Employee

Fife, WA27 days ago

Full-time
Employee

Renishaw Revo 2 5 axis CMM head, In machine profilometer attachment Minimum of 2 years’ experience as a QA Inspector in the aerospace industryHands-on experience with CMMs, geometric tolerances, and precision measurement equipment. We support mission-critical commercial and government aerospace programs across North America through four U.S. Centers of Excellence operating as an integrated platform with 150+ CNC machines and a team of 250+ professionals.

Kent, WA30+ days ago

$32–$42 Per Hour
Full-time
Employee

Need experienced CNC Mill or CNC Lathe (Or both) Machinists that can set up, operate, and edit machines. Feel free to send your resume directly to dycoulter@aerotek.com

Tacoma, WA30+ days ago

$28.75–$42.75 Per Hour
Full-time
Employee

Expertise in using a variety precision measuring tools such as calipers, micrometers, depth micrometers, pin-gauges, air gauges, height gauges and comparators to determine dimensions and tolerances of finished work piece by using sequence of operations and set-up requirements from drawings, work orders and verbal instructions. Maintains specifications by taking measurements; detecting malfunctions; troubleshooting processes; adjusting and reprogramming; replacing worn tools; adhering to quality assurance procedures and processes.

Tacoma, WA30+ days ago

$93,600–$112,320 Per Year
Full-time
Employee

While performing the duties of this job, the employee regularly is required to stand; walk; sit; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; balance; stoop; talk and hear. In collaboration with cross‑functional partners, this leader shapes production strategies, supports process modernization, and fosters a culture of accountability, improvement, and operational excellence.

Bonney Lake, WA30+ days ago

Full-time
Employee

Develop cost estimates covering: CNC milling (3-axis, 4-axis, and 5-axis), CNC turning and mill-turn operations, Hard metal and soft metal machining strategies, Tooling, fixtures, and work holding, Programming requirements, Inspection and quality requirements, Fabrication operations, Kitting and mechanical assembly, and outside processing and special processes. Tessera is seeking a collaborative and data-driven Manufacturing Lead Estimator to deliver prompt, accurate, and competitive quotations that allow Tessera to win and profitably execute complex aerospace manufacturing programs.

Kent, WA30+ days ago

$26.90–$34.35 Per Hour
Full-time
Employee

Parker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Working with some of the most brilliant minds in the industry, your contributions will be pivotal in developing innovative technologies and products, significantly contributing to Parker's goal of addressing the world's most pressing engineering challenges.

Crystal Mountain, WA30+ days ago

$27.78–$32.51 Per Hour
Full-time
Employee

Parker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Our Purpose - Enabling Engineering Breakthroughs that Lead to a Better Tomorrow - comes to life through our people-first culture where teamwork drives performance, inclusion fuels innovation and growth is encouraged.

Redmond, WA30+ days ago

Full-time
Employee

Certain Terex products and solutions enable customers to reduce their impact on the environment including electric and hybrid offerings that deliver quiet and emission-free performance, products that support renewable energy, and products that aid in the recovery of useful materials from various types of waste. We design and manufacture advanced specialty vehicles-including fire, ambulance, and recreational vehicles-alongside waste collection vehicles, materials processing machinery, mobile elevating work platforms, and equipment for the electric utility industry.

Kent, WA30+ days ago

$26.90–$34.35 Per Hour
Full-time
Employee

Woodmont Beach, WA19 days ago

$23.50–$31.15 Per Hour
Full-time
Employee

Crystal Mountain, WA19 days ago

$23.63–$29.58 Per Hour
Full-time
Employee

Parker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Our Purpose - Enabling Engineering Breakthroughs that Lead to a Better Tomorrow - comes to life through our people-first culture where teamwork drives performance, inclusion fuels innovation and growth is encouraged.

Crystal Mountain, WA19 days ago

$27.78–$32.51 Per Hour
Full-time
Employee

Parker offers competitive benefit programs, including: Comprehensive coverage for medical, prescription drugs, dental, vision, voluntary optional life, accident insurance, hospital indemnity insurance and critical illness insurance with competitive premium cost. Our Purpose - Enabling Engineering Breakthroughs that Lead to a Better Tomorrow - comes to life through our people-first culture where teamwork drives performance, inclusion fuels innovation and growth is encouraged.

Kent, WA30+ days ago

Full-time
Employee

Operates multiple types of machine tools and performs progressive machining operations to completion, creating tooling components and assemblies with close tolerances or high finish requirements. * May have a demonstrated expertise on multiple machine types or work on one single purpose machine which may involve multiple machining processes.

Algona, WA20 days ago

Full-time
Employee

Ability to: stand continually, walk regularly, sit continually, hear/listen carefully regularly, climb and/or balance infrequently, stoop, kneel, crouch or crawl occasionally, twist occasionally at the trunk or neck, bend occasionally, reach with hands and arms regularly, taste and/ use sense of smell infrequently, use hands to manipulate, handle and/or feel in the act of performing the required responsibilities of the position. Visual acuity needed for close detail work, clarity with distance, distinction with color, peripheral observation up and down/left and right, depth perception for distance and spatial relationships, sharp focus of objects brought into line of sight.

Algona, WA20 days ago

Full-time
Employee

Ability to: stand continually, walk regularly, sit continually, hear/listen carefully regularly, climb and/or balance infrequently, stoop, kneel, crouch or crawl occasionally, twist occasionally at the trunk or neck, bend occasionally, reach with hands and arms regularly, taste and/ use sense of smell infrequently, use hands to manipulate, handle and/or feel in the act of performing the required responsibilities of the position. This position requires use of information or access to production processes subject to national security controls under U.S. export control laws and regulations (including, but not limited to the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR)).

Algona, WA20 days ago

Full-time
Employee

Redmond, WA27 days ago

Basic Qualifications - 3+ years of project management, including resource planning, managing schedules, reporting project status and prioritizing tasks experience - 5+ years of machine shop experience operating CNC equipment (multi-axis mills, lathes, routers)5+ year of experience with GD&T3+ year of experience machining tight tolerance, high value components - Experience with G-code programming and CNC machine setup and operation. - Experience with a variety of materials (aluminum, stainless steels, titanium and nickel based alloys) - Experience proving out first article NC programs A day in the life The CNC Machinist will work closely with programmers, engineers and machining shop management to outline, develop and optimize new machining and manufacturing processes.

Redmond, WA14 days ago

Basic Qualifications - 3+ years of project management, including resource planning, managing schedules, reporting project status and prioritizing tasks experience - Experience managing multiple projects, prioritizing, planning, and managing time - 5+ years of machine shop experience operating CNC equipment (multi-axis mills, lathes, routers)5+ year of experience with GD&T3+ year of experience machining tight tolerance, high value components - Experience with G-code programming and CNC machine setup and operation. - Experience with a variety of materials (aluminum, stainless steels, titanium and nickel based alloys) - Experience proving out first article NC programs A day in the life The CNC Machinist will work closely with programmers, engineers and machining shop management to outline, develop and optimize new machining and manufacturing processes.

New!

Kirkland, WA1 day ago

$30–$38 Per Hour

Must be able to lift or move heavy objects up to 40lbs and must be able to stand and work as long as 12 hours in different positions. Based out of the Pacific Northwest, we offer innovative concept through production services to diverse clients around the globe.

New!

Auburn, WAToday

$30–$50 Per Hour

The CNC Machinist will lead the department and manufacturing of parts which include setting up, running, performing CNC Programming, and handling employee schedules. Oversee Labor Tickets, Time Cards, & Paperwork /Work Orders Are Accurately Submitted .

Seattle, WA30+ days ago

$30–$40 Per Hour

As a Mill Machinist you should have familiarity with HAAS 3- and 4-axis milling machines and the ability to machine parts per drawing and planning, working cooperatively within the CNC Department as well as other departments to ensure proper fit, function, and quality of machined parts. 3 to 5 years of CNC Mill (Preferred HAAS 3 Axis Vertical) experience, including set-ups, setting tools, and offsets; and/or equivalent education working in a manufacturing environment.

Tacoma, WA30+ days ago

$28–$36 Per Hour

American Workforce Group has partnered with a premier aerospace fabrication facility in Tacoma, WA to find a dual-threat CNC Machinist. Programming: Proven ability to develop complete programs from scratch, including toolpath strategy.

KENT, WA27 days ago

This role supports day-to-day machining operations across a variety of equipment, including conventional lathes, CNC mills, and 5-axis machines. Strong experience with Conventional/manual lathes, CNC machining (mills and/or lathes), 5-axis machining preferred.

New!

Tacoma, WA4 days ago

$30–$40 Per Hour

Due to General Plastics' participation in the defense industry, International Traffic in Arms (ITAR) requires that access to sensitive information and material pertaining to defense and military related technologies may only be accessed, viewed, or shared by US Persons as defined by law. General Plastics is a Drug and Alcohol-Free Workplace and both post offer applicants and employees are subject to testing for marijuana, cocaine, PCP, opioids, amphetamines, and alcohol when criteria are met as outlined in our company policies.

Snoqualmie, WA30+ days ago

In this role, you'll machine high-precision parts using CNC and conventional equipment, work cross-functionally to ensure on-time delivery, and help design tools and fixtures that keep our operation running at its best. With Staff Management | SMX, you'll get a weekly paycheck, learn new skills, meet new people, and work with a great management team in a clean and safe environment.

New!

Seattle, WA5 days ago

This job description is designed to provide an overview of basic skills, experiences and education required to perform the job and is not designed to cover or contain a comprehensive listing of all activities, duties, or responsibilities required of the employee to perform the essential functions of the job. Headquartered in Sudbury, Mass., and in operation since 1958, Methods provides an end-to-end portfolio of best-in-class products, engineering, service, parts, training, and integration.

Kirkland, WA30+ days ago

To learn more about our other openings at Jemco (QA Inspector, CNC Programmer, CMM Programmer, Shipping Clerk), please visit www.jemcoinc.com. Some of the requirements for Machinists include: o Perform set ups and/or operate 3-,4-, and 5-axis CNC mills (relevant job experience critical!).

Redmond, WA30+ days ago

$23–$29 Per Hour

RESPONSIBILITIES: + Responsible for setting up, operating multi-axis CNC machines (mills and lathes) up to and including 5 Axis mills and 6 axis lathes + Responsible for all types of drilling, tapping and milling and turning + Completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for machining complex, tight tolerances parts and various materials + Material prep, deburring parts, hauling chips, oiling machines, sweeping up and initiating or assisting in organizational tasks BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 3+ years of experience in the setup and operation of CNC machines + G-code experience PREFERRED SKILLS AND EXPERIENCE: + Experience with GD&T or interpreting blueprints/manufacturing drawings + Short run, prototype, non-production machining experience + Horizontal Mill experience + Experience running lathes + live tooling ADDITIONAL REQUIREMENTS: + Must be available for 10 hour shifts. unassisted + Able to stand for extended periods- 8 hours min + Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces + Repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: CNC Machinist/Level 1: $23.00 - $29.00/hour CNC Machinist/Level 2: $28.00 - $34.50/hour CNC Machinist/Level 2: $33.00 - $40.00/hour

New!

Kent, WA6 days ago

$30–$45 Per Hour

In this role, you will be responsible for setting up and operating CNC vertical and horizontal machining centers to produce high-precision aerospace components. Experience working with multi-axis machining centers (3-axis, 4-axis, or 5-axis).

Redmond, WA30+ days ago

$38–$45 Per Hour

RESPONSIBILITIES: + Responsible for setting up, operating multi-axis CNC machines (mills and lathes) up to and including 5 Axis mills and 6 axis lathes + Responsible for all types of drilling, tapping and milling and turning + Completing machining operations from blueprints, drawings and/or verbal instructions + Responsible for machining complex, tight tolerances parts and various materials + Material prep, deburring parts, hauling chips, oiling machines, sweeping up and initiating or assisting in organizational tasks BASIC QUALIFICATIONS: + High school diploma or equivalency certificate + 7+ years of experience in the setup and operation of CNC machines + G-code experience PREFERRED SKILLS AND EXPERIENCE: + 10+ years of experience in the setup and operation of CNC machines + Experience with GD&T or interpreting blueprints/manufacturing drawings + Short run, prototype, non-production machining experience + Horizontal mill experience + Basic programming experience + Experience running lathes + live tooling ADDITIONAL REQUIREMENTS: + Must be available for 10 hour shifts. unassisted + Able to stand for extended periods- 8 hours min + Must be able to stoop, bend, crawl, and being able to maneuver in tight spaces + Repetitive movement, bending or twisting, using hands to handle, control, or feel objects, tools or controls, exposure to sounds and noise levels that are distracting COMPENSATION AND BENEFITS: Pay range: CNC Machinist/Level 4: $38.00 - $45.00/hour CNC Machinist/Level 5: $43.00 - $52.00/hour

Kent, WA30+ days ago

Full-time

Title: Aerospace CNC MachinistLocation: Kent, WA (onsite only)Contract Length: 6-12+ months (extension possible)Clearance: Must be a U.S. Citizen or Green Card holderPlease email stephanie.narlesky@comcentric.com a copy of your resume and any desired shift(s). Role Overview:You'll work closely with a diverse team of machinists, NC programmers, and engineers to set up, operate, and maintain advanced CNC machinery.

New!

Sumner, WA1 day ago

$30–$40 Per Hour

You’ll balance speed with rigor—planning fixturing and tooling, programming basic lathe paths in MasterCAM, inspecting in-process parts with precision gauges, and ensuring every machine is producing parts that meet spec. You’ll lead a compact, capable team (1–3 employees) that spans two shifts, while personally executing set-ups and first runs on 2-axis and multi-axis CNC lathes with sub-spindles.

Seattle, WA10 days ago

USA, MA, N.Reading - 137,300.00 - 185,700.00 USD annually USA, TX, Austin - 137,300.00 - 185,700.00 USD annually USA, WA, Seattle - 137,300.00 - 185,700.00 USD annually This role requires deep experience with multi-axis CNC machining, fixturing, tooling, and process validation, along with the ability to think holistically-connecting machine selection, process architecture, and operational performance.

Resume Resources

Free Resume Templates Free Resume Builder

Get noticed by top employers!

Upload your resume to let employers know you're open to CNC job opportunities. Plus, receive relevant job recommendations in your inbox.

CNC Jobs in Tacoma, WA

Jobs

CNC MachinistPrideStaff

CNC programmerBelcan Corp

CNC MachinistMETALTECH INC

CNC Lathe machinistBennett industries inc.com

CNC Machinist - B Shift (M-Th 3p-1:30a)Blue Origin LLC

CNC Machinist - D Shift (F-Su 5a-5:30p)Blue Origin LLC

CNC MachinistAerotek

CNC MachinistAdvantage Technical Services, Inc

Senior CNC Machinist - Aerospace ManufacturingPacific Propeller International LLC

CNC MachinistPrimus International LLC

CNC Operator/MachinistAmerican Workforce Group

CNC Laser Operator - C ShiftBlue Origin LLC

CNC Operator III Weekend ShiftSekisui Aerospace

CNC OperatorThyssenKrupp Materials NA Inc

Numerical Control Programmer 3Spectraforce Technologies Inc.

Numerical Control Programmer 4Spectraforce Technologies Inc.

Machinist Weekday 2nd ShiftBlue Origin LLC

CMM ProgrammerRTC Aerospace

MachinistAerotek

Machinist - PlasticsDemgy Pacific, LLC

Machining ManagerDemgy Pacific, LLC

Manufacturing Lead EstimatorSkookum Educational Programs

Experienced MachinistParker Hannifin Corporation

Advanced Machinist - 2nd ShiftParker Hannifin Corporation

Machinist II/IIITerex Corporation

Experienced Machinist (Aerospace)Parker Hannifin Corporation

Aerospace MachinistParker Hannifin Corporation

Machinist Skilled - 2nd ShiftParker Hannifin Corporation

Machinist AdvancedParker Hannifin Corporation

Machinist 2Belcan Corp

Machinist - Weekday Night Shift - AlgonaPrimus International LLC

Machinist - Weekend Night Shift - AlgonaPrimus International LLC

Machinist - Weekend Day Shift - AlgonaPrimus International LLC

CNC Machinist, Amazon LeoAmazon

Development CNC Machinist, Amazon LeoAmazon

CNC Machinist IISigma Design

CNC MachinistPrideStaff SW Seattle

CNC Mill Set-up/MachinistIndustrial Automation Inc.

CNC MachinistAmerican Workforce Group, Inc.

CNC MachinistNew Era HR Solutions

CNC Programmer/MachinistGeneral Plastics Manufacturing Company

CNC MachinistStaff Management | SMX

Field Service Engineer- CNC Machine Tools-WASwift Placement & Consulting

CNC Machinist -- Multiple Shifts & OpeningsJEMCO Components & Fabrication, Inc.

CNC Machinist (Starlink)SpaceX

CNC Operator lllTruFit Staffing

CNC Machinist (Starlink) - Level 4/5SpaceX

Aerospace CNC MachinistComcentric, Inc.

Senior Precision Machining Lead — CNC LathesPrideStaff - Seattle

Senior Manufacturing Engineer, CNC MachiningAmazon

Resume Resources