Engineer I-III TXNM Energy IncEngineer I-IIIAlamogordo, NMCOMPETENCIES: Broad knowledge and proven ability to apply engineering principles, practices and regulations to, and perform economic and decision analysis studies of issues in areas including, but not limited to, generation, transmission, distribution, system planning, financial and regulatory issues, asset utilization, and environmental controls and regulations. MINIMUM EDUCATION AND/OR EXPERIENCE: Bachelors Degree in engineering from a college or university accredited by the Accreditation Board for Engineering and Technology, Inc. (ABET) and one to three years related experience.
ENGINEER I-IV TXNM Energy IncENGINEER I-IVAlbuquerque, NM$94,831–$128,022 / yearCOMPETENCIES: Extensive knowledge and proven ability to apply diverse engineering principles, practices and regulations and to perform economic and decision analysis studies of complex issues in areas including, but not limited to, generation, transmission, distribution, system planning, financial and regulatory issues, asset utilization, and environmental controls and regulations. COMPETENCIES: Broad knowledge and proven ability to apply engineering principles, practices and regulations to, and perform economic and decision analysis studies of issues in areas including, but not limited to, generation, transmission, distribution, system planning, financial and regulatory issues, asset utilization, and environmental controls and regulations.
Engineer I-IV (Transmission/Distribution Planning Contracts) TXNM Energy IncEngineer I-IV (Transmission/Distribution Planning Contracts)Albuquerque, NMCOMPETENCIES: Extensive knowledge and proven ability to apply diverse engineering principles, practices and regulations and to perform economic and decision analysis studies of complex issues in areas including, but not limited to, generation, transmission, distribution, system planning, financial and regulatory issues, asset utilization, and environmental controls and regulations. COMPETENCIES: Broad knowledge and proven ability to apply engineering principles, practices and regulations to, and perform economic and decision analysis studies of issues in areas including, but not limited to, generation, transmission, distribution, system planning, financial and regulatory issues, asset utilization, and environmental controls and regulations.
Engineer I-IV TXNM Energy IncEngineer I-IVAlbuquerque, NMCOMPETENCIES: Extensive knowledge and proven ability to apply diverse engineering principles, practices and regulations and to perform economic and decision analysis studies of complex issues in areas including, but not limited to, generation, transmission, distribution, system planning, financial and regulatory issues, asset utilization, and environmental controls and regulations. COMPETENCIES: Broad knowledge and proven ability to apply engineering principles, practices and regulations to, and perform economic and decision analysis studies of issues in areas including, but not limited to, generation, transmission, distribution, system planning, financial and regulatory issues, asset utilization, and environmental controls and regulations.
Engineer I-IV (Distribution Protection) TXNM Energy IncEngineer I-IV (Distribution Protection)Albuquerque, NMCOMPETENCIES: Extensive knowledge and proven ability to apply diverse engineering principles, practices and regulations and to perform economic and decision analysis studies of complex issues in areas including, but not limited to, generation, transmission, distribution, system planning, financial and regulatory issues, asset utilization, and environmental controls and regulations. COMPETENCIES: Broad knowledge and proven ability to apply engineering principles, practices and regulations to, and perform economic and decision analysis studies of issues in areas including, but not limited to, generation, transmission, distribution, system planning, financial and regulatory issues, asset utilization, and environmental controls and regulations.
Engineer I-III (New Service Delivery) TXNM Energy IncEngineer I-III (New Service Delivery)Albuquerque, NMCOMPETENCIES: Broad knowledge and proven ability to apply engineering principles, practices and regulations to, and perform economic and decision analysis studies of issues in areas including, but not limited to, generation, transmission, distribution, system planning, financial and regulatory issues, asset utilization, and environmental controls and regulations. MINIMUM EDUCATION AND/OR EXPERIENCE: Bachelors Degree in engineering from a college or university accredited by the Accreditation Board for Engineering and Technology, Inc. (ABET) and one to three years related experience.
Engineer 4 COMPA IndustriesEngineer 4New MexicoYou will be responsible for assigned activities within your engineering discipline in support of facility design, operation, and maintenance, applying broad and diversified knowledge of engineering principles and practices in the preparation of complex engineering analyses. The role covers all aspects of work in engineering operations within the discipline, including conventional design and analysis, construction and project support, and coordination of inter-disciplinary activities.
Senior Controls Engineer Hired by MatrixSenior Controls EngineerAlbuquerque, NM$110,000–$125,000 / yearResponsibilities: Senior Electrical Engineer will interact directly with the customers engineers and drafters in identifying requirements, developing specifications, and implementing/testing/commissioning/qualifying electrical solutions. Major Responsibilities: Responsible for 480 VAC designs and drawings including motor branch circuits, power distribution and transformation, MCC design and specification, and electrical equipment specification.
Nuclear Facilities Engineer 3/4 - Shift Technical Engineer Los Alamos National LaboratoryNuclear Facilities Engineer 3/4 - Shift Technical EngineerLos Alamos, NM$125,200–$211,300 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China, the Islamic Republic of Iran, the Democratic People's Republic of North Korea, and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. The Plutonium Facilities Engineering Division Essential Balance of Plant Group (PFE-EBP) at Los Alamos National Laboratory is seeking multiple experienced Nuclear Facility Engineers to be part of a brand-new Shift Technical Engineering Team, a mission-critical team that will support 24/7 operations at the TA-55 Plutonium Facility.
Engineered Systems Technician 1/2 Los Alamos National LaboratoryEngineered Systems Technician 1/2Los Alamos, NM$49,600–$76,700 / yearDue to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China-including the special administrative regions of Hong Kong and Macau-as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. Experience with two or more of the following: 1) installation and testing of high-power RF devices and/or systems; 2) installation and testing of high-voltage and pulsed-power devices and/or systems; 3) installation and testing of RF power amplifiers, DC and pulsed-power systems; or 4) installation and testing of RF transport systems such as cables, coaxial lines or waveguides.
Engineer I/II/III (Measurement Engineering) New Mexico Gas Co IncEngineer I/II/III (Measurement Engineering)Albuquerque, NM$104,960–$131,200 / yearConducts or participates in studies of intermediate size that evaluate performance, cost, and scheduling criteria of a limited number of alternatives applies routine engineering techniques, practices, and procedures in support of operational areas. The Engineer I position pays between $73,440 to $91,800; the Engineer II position pays between $88,640 to $110,800; and the Engineer III position pays between $104,960 to $131,200.
Engineer I/II/III (Pipeline Design) New Mexico Gas Co IncEngineer I/II/III (Pipeline Design)Albuquerque, NM$104,960–$131,200 / yearConducts or participates in studies of intermediate size that evaluate performance, cost, and scheduling criteria of a limited number of alternatives applies routine engineering techniques, practices, and procedures in support of operational areas. This Engineer I position pays between $73,440 and $91,800; the Engineer II position pays between $88,640 and $110,800; and the Engineer III position pays between $104,960 and $131,200.
Field/ Office Engineer- Kiewit Industrial District Kiewit CorpField/ Office Engineer- Kiewit Industrial DistrictSanta Teresa, NM$88,000–$94,380 / yearBachelor's degree in Construction Management, Electrical Engineering, Mechanical Engineering, Civil Engineering, or a related field; Associate's degree in Construction Management or Electrical Engineering also considered with relevant equivalent experience. We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off.
Lead Engineer - RF Engineering AeroVironment IncLead Engineer - RF EngineeringAlbuquerque, NM$111,500–$170,000 / yearArchitect automated test sequences (Python/LabVIEW/MATLAB or similar) for VNAs, spectrum analyzers, signal generators, power meters, oscilloscopes, and RF switch matrices; integrate data logging, serialization, and dashboards; manage version control and CI where appropriate. Working knowledge of IPC-2221/2223, IPC-6012, IPC-A-600/-610 Class 3, ANSI/ESD S20.20, environmental/EMI test practices (e.g., MIL-STD-810/461 as applicable), calibration traceability,+ and DoD documentation practices.
Systems Engineer - Mission Integration & Capability Delivery ENSCOSystems Engineer - Mission Integration & Capability DeliveryAlbuquerque, New MexicoBachelor's or advanced degree in electrical engineering, aerospace engineering, software engineering, computer science, mechanical engineering, physics, mathematics, data science, engineering management, or a closely related technical discipline, plus a minimum of 7 years of relevant professional experience. • Broad engineering experience across several of the following areas: logistics, mission analysis, architecture, hardware, software, networks, communications, data, cybersecurity, integration, testing, modeling, infrastructure, operations, or sustainment.
Engineer 2 COMPA IndustriesEngineer 2New MexicoExperience with facility electrical design, low-voltage power distribution, 120V/208V systems, below-480V applications, panels, feeders, conductors, conduit, junction boxes, grounding, lighting, controls, instrumentation, one-lines, schematics, and equipment installation support. This role directly supports TA-55 and related plutonium facility mission areas by ensuring electrical designs, construction documents, and field engineering solutions are safe, technically accurate, constructible, and aligned with LANL and DOE/NNSA requirements.
Mechanical, I&C, or Structural Engineer 2/3 Los Alamos National LaboratoryMechanical, I&C, or Structural Engineer 2/3Los Alamos, NM$106,400–$176,000 / yearNote to Applicants: Due to federal restrictions contained in the current National Defense Authorization Act, citizens of the People's Republic of China - including the special administrative regions of Hong Kong and Macau - as well as citizens of the Islamic Republic of Iran, the Democratic People's Republic of Korea (North Korea), and the Russian Federation, who are not Lawful Permanent Residents ("green card" holders) are prohibited from accessing facilities that support the mission, functions, and operations of national security laboratories and nuclear weapons production facilities, which includes Los Alamos National Laboratory. DOE Order 426.2: This position is subject to DOE Order 426.2, Personnel Selection, Training, and Qualification Requirements for DOE Nuclear Facilities, which establishes entry-level requirements to ensure candidates selected for specific positions can successfully perform the requirements of the job.
Controls Engineer Wunderlich-Malec CareersControls EngineerAlbuquerque, New MexicoWorking within a dynamic system integration environment, you will be part of a team responsible for delivering high-quality, fit-for-purpose, regulatory-compliant automation that supports the business drivers of our client base. Electrical/Instrumentation, device checkout and troubleshooting, including voltage testing, troubleshooting equipment on a ladder, and light electrical assembly (e.g., signal wiring in control panels/instruments).
Process Engineer 1 Creation Technologies LLCProcess Engineer 1Albuquerque, NMBachelor's Degree (4 year) in Engineering (Mechanical, Electrical, Chemical, Industrial, Mechatronic, or other relevant discipline) or a related field with a focus on electronics and manufacturing processes or equivalent industry or military training experience. Collaborates effectively within the engineering team, other functions, and 3rd party partners, communicating technical information clearly and contributing to operational goals.
Senior Mechanical Engineer LeidosSenior Mechanical EngineerAlbuquerque, New MexicoThe successful candidate will work with a multidisciplinary team of engineers, scientists, technicians, and fabricators in a research and development environment supporting advanced directed energy technologies, including high-power microwave, RF, electromagnetic, and pulsed-power systems. The team includes mechanical and electrical engineers, scientists, technicians, machinists, fabricators, drafters, and other technical specialists working together to develop, build, integrate, and test advanced hardware and experimental systems.