Senior Avionics Dev Lab Technician Blue Origin Enterprises LPSenior Avionics Dev Lab TechnicianSeattle, WA$36.60–$51.23 / hourand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Engineering Technician II Sigma Design.Engineering Technician IIRedmond, WA$29–$38 / hourPrimary Function: The Engineering Technician II is responsible for maintaining and upgrading prototypes, products, tools, and assemblies in support of Sigma Design's engineering activities. Essential Job Functions - Responsibilities: Maintain and upgrade prototypes using mechanical assembly, point-to-point wiring, soldering, and harness assembly.
Avionics Dev Lab Technician Blue Origin Enterprises LPAvionics Dev Lab TechnicianWA$36.60–$51.23 / hourand/or transports placardable amounts of hazardous materials by ground in any vehicle on a public road while in commerce, may be subject to additional Federal Motor Carrier Safety Regulations including: Driver Qualification Files, Medical Certification (obtained before onboarding), Road Test, Hours of Service, Drug and Alcohol Testing (CDL drivers only), vehicle inspection requirements, CDL requirements (if applicable) and hazardous materials transportation/shipping training. Required for Certain Job Profiles: Drivers who operate Commercial Motor Vehicles with a Gross Vehicle Weight (GVW), Gross Vehicle Weight Rating (GVWR) or combination of power unit and trailer that meets or exceeds 10,001 lbs.
Electro-Mechanical Technician Junior Tri-Tec Manufacturing LLCElectro-Mechanical Technician JuniorKent, WAGo back to careersElectro-Mechanical Technician JuniorPosted Date:June 10, 2026Status:Full TimeSynopsis:We are looking for a skilled technician to join our team designing and building valve actuator products for marine applicationsThe Technician's responsibilities include: • Assembling electromechanical valve actuator prototypes and test units. There is potential for periodic domestic travel to U.S. Naval bases and shipyards.
Quality Assurance Technician Konica Minolta Sensing AmericasQuality Assurance TechnicianRedmond, WAWe are seeking a Quality Assurance Technician to play a key role in assembling, calibrating, testing, and evaluating KMSA products while also supporting Quality Assurance activities such as RMA oversight, diagnostics, documentation, and process improvement. Konica Minolta Sensing Americas, Inc. works with leading brands, manufacturers, and research organizations to provide advanced measurement solutions that support product quality, consistency, innovation, and performance.
Quality Assurance Technician Radiant Vision SystemsQuality Assurance TechnicianRedmond, WAWe are seeking a Quality Assurance Technician to play a key role in assembling, calibrating, testing, and evaluating KMSA products while also supporting Quality Assurance activities such as RMA oversight, diagnostics, documentation, and process improvement. Konica Minolta Sensing Americas, Inc. works with leading brands, manufacturers, and research organizations to provide advanced measurement solutions that support product quality, consistency, innovation, and performance.
Sr. Production Test Technician (2026-044) (WA, Kirkland) Astronics CorpSr. Production Test Technician (2026-044) (WA, Kirkland)Kirkland, WA$29.14–$43.71 / hourPerform functions associated with all manufacturing operations, including working with engineers in set-up, as well as performing troubleshooting, rework, and quality testing related to the production of parts, components, subassemblies and final assemblies. Astronics AES offers a competitive benefits package including: Stay Healthy - Health, dental, vision, disability, life insurance, FSA, HSA, as well as voluntary life/AD&D, voluntary critical illness, accident prevention and hospital indemnity.
Sr. Production Test Technician (2025-040) AstronicsSr. Production Test Technician (2025-040)Kirkland, WashingtonPerform functions associated with all manufacturing operations, including working with engineers in set-up, as well as performing troubleshooting, rework, and quality testing related to the production of parts, components, subassemblies and final assemblies. Stay Healthy - Health, dental, vision, disability, life insurance, FSA, HSA, as well as voluntary life/AD&D, voluntary critical illness, accident prevention and hospital indemnity.
Avionics Technician Rainier RecruitingAvionics TechnicianKent, WashingtonA focus on safety, collaborative teamwork, and quality allows us to work together to determine the best path forward, balancing speed and safety to create high-quality components that will propel future astronauts and payloads into space for the improvement of mankind. Named the #1 Best Workplace in Washington State in 2022, recognized as a ClearlyRated Best of Staffing firm, and identified as a top recruitment firm by multiple business journals, Rainier Recruiting is fast becoming a respected company.
Senior Engineering Technician, Operations Support HelionSenior Engineering Technician, Operations SupportEverett, WAIt's a hands-on engineering role for people who enjoy solving complex technical challenges, building first-of-a-kind hardware, and working in a fast-paced R&D environment where every day presents new opportunities to build, test, troubleshoot, maintain, and improve cutting-edge fusion systems. Since Helion's founding in 2013, we have raised $1.5 billion from long-time investors such as Sam Altman, Mithril, and Capricorn Investment Group as well as new investors including Thrive Capital, LightSpeed Venture Capital, SoftBank, and others to propel us forward.
Avionics Integration Technician Stoke SpaceAvionics Integration TechnicianKent, WA$26.25–$38.52 / hourTo conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), you must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. Comfortable with the tooling and processes around aerospace grade wiring harnesses and be comfortable operating and maintaining both hand and automatic harnessing tools.
Development Technician PCBA - 2nd Shift Starlink Space Exploration Technologies CorpDevelopment Technician PCBA - 2nd Shift StarlinkRedmond, WA$23–$29 / hourThe ideal candidate: has strong SMT/PCBA experience; enjoys working directly with engineers; proven skills for troubleshooting complex issues; possesses excellent attention to detail; and thrives in a fast-paced environment with shifting priorities. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
Aerospace Technician The Staffing Resource Group, IncAerospace TechnicianKent, WA$45–$47 / hourSRG Government Services is a leading provider of information technology, training, engineering, accounting and intelligence analytical services for agencies in the intelligence, defense, homeland security, cyber security, and federal civilian markets. SRG utilizes an innovative approach to identify and qualify talent that is unique to the federal contracting industry, featuring a cutting-edge platform that allows us to rapidly and precisely match professionals to client requirements.
Hardware Engineering Technician Lumotive LLCHardware Engineering TechnicianRedmond, WA$40,000–$45,000 / yearLumotive's Light Control Metasurface (LCM) beam forming chips can be programmed to function as a beam steering mirror, a lens, mirror, a beam splitter-or any optical function-replacing bulky and mechanical optical components with a fully digital, reconfigurable semiconductor. Responsibilities: Component and sub-assembly intake and inventory management: Manage and optimize intake and quality control procedure for circuit boards, optomechanical components, and subassemblies.
Optical Technician Fresh ConsultingOptical TechnicianRedmond, WA$40–$45 / hourWe bring together amazing UX designers, sophisticated developers, digital strategists, and top-notch engineers to help companies create fresh experiences that connect humans, systems, and machines. The ideal candidate will have hands-on experience in opto-mechanical and electrical assembly techniques (soldering, lamination, machining) and has a good attention to organization and cleanliness.
Station Technician BRINC DronesStation TechnicianSeattle, WAOur cutting-edge solutions are utilized by over 600 public safety agencies across America and the company has raised over $150M from investors, including Index Ventures, Motorola Solutions, Sam Altman, Dylan Field, Mike Volpe, Alexandr Wang and more. Today, weve expanded into creating and deploying 911 response networks, where drones are dispatched to 911 calls to provide real-time visual data, enhancing safety and enabling de-escalation-focused responses.
SMT Rework Technician Space Exploration Technologies CorpSMT Rework TechnicianRedmond, WA$27–$33 / hourAs an SMT (Surface-Mounted Technology) Rework Technician you would be joining a small team that supports PCBA (Printed Circuit Board Assembly) rework with the highest grade of difficulty and harness repairs coming from a variety of our Starlink Production Departments. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
NewStarlink Production Technician - PCBA Space Exploration Technologies CorpStarlink Production Technician - PCBARedmond, WA$22–$26.50 / hourRESPONSIBILITIES: Operated PCB assembly machines to manufacture circuit boards, including SMT placement, reflow soldering, solder paste printing, conformal coating, masking, epoxy application, selective coating, optical inspection, and X-ray inspection. ITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State.
DFR Maintenance Technician BrincDFR Maintenance TechnicianSeattle, WashingtonOur cutting-edge solutions are utilized by over 600 public safety agencies across America and the company has raised over $150M from investors, including Index Ventures, Motorola Solutions, Sam Altman, Dylan Field, Mike Volpe, Alexandr Wang and more. Today, we've expanded into creating and deploying 911 response networks, where drones are dispatched to 911 calls to provide real-time visual data, enhancing safety and enabling de-escalation-focused responses.
Diagnostics Technician HelionDiagnostics TechnicianEverett, WashingtonSince Helion's founding in 2013, we have raised $1.5 billion from long-time investors such as Sam Altman, Mithril, and Capricorn Investment Group as well as new investors including Thrive Capital, LightSpeed Venture Capital, SoftBank, and others to propel us forward. 5+ years of relevant hands-on experience as an Advanced Electrical or Mechanical Technician, with a focus on rapid prototyping and iteration in a research, fabrication, or test lab environment.
Electro-Mechanical Technician Mid Level Tri-Tec Manufacturing LLCElectro-Mechanical Technician Mid LevelKent, WA$33–$42 / hourGo back to careersElectro-Mechanical Technician Mid LevelPosted Date:June 10, 2026Status:Full TimeSynopsis:We are seeking a Mid‑Level Electro‑Mechanical Technician to support engineering test activities, prototype builds, and product development for marine valve actuator systems and related electromechanical equipment. This role focuses on executing and documenting shock, vibration, EMI/EMC, thermal, and life‑cycle testing, as well as supporting cable fabrication, prototype assembly, and engineering documentation.
Propulsion Functional Technician, Amazon Leo AmazonPropulsion Functional Technician, Amazon LeoRedmond, WAThe Propulsion Manufacturing Functional Technician III will work within the Amazon Leo Propulsion Manufacturing Team supporting the build and integration of electric propulsion subsystems, including feed systems, thrusters, cathodes, PCBAs, tanks, and the integrated propulsion system. Description Amazon Leo is an initiative to launch a constellation of Low Earth Orbit satellites that will provide low-latency, high-speed broadband connectivity to unserved and underserved communities around the world.
Wheelchair Seating Technician United Seating & MobilityWheelchair Seating TechnicianEverett, WA$23.80–$30.94 / hourMaintaining our standing as the industry leader in CRT comes from having a workforce with a diverse mix of minds, backgrounds and experiences, and we are committed to cultivating an inclusive work environment based on open dialogue, active listening and ongoing definitive actions. From manual and powered wheelchairs to disposable medical supplies that serve unique medical and functional needs, we are improving the lives of people with disabilities by enabling them to actively participate in everyday life.
Starlink Production Technician - 2nd Shift Space Exploration Technologies CorpStarlink Production Technician - 2nd ShiftRedmond, WA$22–$26.50 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. This hands-on role involves building electrical and mechanical sub-assemblies, performing functional tests, and supporting prototype development in a fast-paced aerospace environment.
Starlink Production Technician - Entry Level Space Exploration Technologies CorpStarlink Production Technician - Entry LevelRedmond, WA$22–$26.50 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. This hands-on role involves building electrical and mechanical sub-assemblies, performing functional tests, and supporting prototype development in a fast-paced aerospace environment.
Starlink Production Technician Space Exploration Technologies CorpStarlink Production TechnicianRedmond, WA$22–$26.50 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. This hands-on role involves building electrical and mechanical sub-assemblies, performing functional tests, and supporting prototype development in a fast-paced aerospace environment.
System Maintenance Technicians Smarthost Design Technologies JobsSystem Maintenance TechniciansColumbia, WashingtonMaintain RF antenna systems across various frequencies and power levels, including components such as: Transmit combiners, receive multi-couplers, duplexers, pass and reject filters, diplexers, and precision-tuned filter assemblies. Identify and report any performance deviations or operational concerns to the Contracting Officer’s Representative (COR) for further assessment, corrective actions, or enhancements based on the impact on operational missions.
Engineering Technician II - FA & Reliability Sigma DesignEngineering Technician II - FA & ReliabilityRedmond, WA$29.54–$38.26 / hourThis role partners with engineers to investigate hardware failures, restore failed hardware, execute reliability testing, document results, and prepare repaired assets for continued engineering evaluation. The Engineering Technician II- Failure Analysis is responsible for supporting engineering activities through assembly, troubleshooting, repair, rework, testing, and validation of robotic and electromechanical systems.
Engineering Technician II - Cabling Sigma DesignEngineering Technician II - CablingRedmond, WA$29.54–$38.26 / hourPrimary Function: The Engineering Technician II - Cabling is responsible for maintaining and upgrading prototypes, products, tools, and assemblies in support of Sigma Design's engineering activities. Essential Job Functions- Responsibilities: Maintain and upgrade prototypes using mechanical assembly, point-to-point wiring, soldering, and harness assembly.
Engineering Technician II – Cabling Sigma DesignEngineering Technician II – CablingRedmond, WA$29.54–$38.26 / hourThe Engineering Technician II – Cabling is responsible for maintaining and upgrading prototypes, products, tools, and assemblies in support of Sigma Design’s engineering activities. Occasionally may be required to work in environmental conditions that emulate typical user environments in order to facilitate design testing and validation.
Engineering Technician II – FA & Reliability Sigma DesignEngineering Technician II – FA & ReliabilityRedmond, WA$29.54–$38.26 / hourThis role partners with engineers to investigate hardware failures, restore failed hardware, execute reliability testing, document results, and prepare repaired assets for continued engineering evaluation. The Engineering Technician II – Failure Analysis is responsible for supporting engineering activities through assembly, troubleshooting, repair, rework, testing, and validation of robotic and electromechanical systems.
Production Technician Axelon Services CorporationProduction TechnicianAuburn, WA$23 / hourExperience using various tools including manual/electric tools, drill press, press brake, fork truck, jib crane, template/fixtures, hand carts, tape measure, storage/packaging materials, and prescribed safety equipment. Perform assembly required for test preparation and final inspection using established power checking procedures and equipment to verify electrical/mechanical integrity of units assembled.
Entry Level - Laser Production Technician Starlink Space Exploration Technologies CorpEntry Level - Laser Production Technician StarlinkRedmond, WA$22–$26.50 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
Laser Production Technician Starlink Space Exploration Technologies CorpLaser Production Technician StarlinkRedmond, WA$22–$26.50 / hourITAR REQUIREMENTS: To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. You may also be eligible for long-term incentives, in the form of company stock or long-term cash awards, as well as potential discretionary bonuses and the ability to purchase additional stock at a discount through an Employee Stock Purchase Plan.
RF Calibration Technician Fortive CorporationRF Calibration TechnicianEverett, WA$26.31–$39.47 / hourAs a Calibration Technician on the ECAL Team, you will perform calibrations on new production instruments, recalibrate customer instruments, and maintain the calibration of all measurement and test equipment (M&TE) using internal and external calibration services. We're a force for progress, working alongside our customers and partners to solve challenges on a global scale, from workplace safety in the most demanding conditions to advanced technologies that help providers focus on exceptional patient care.
Integration Technician III, Amazon Leo AmazonIntegration Technician III, Amazon LeoKirkland, WAKey job responsibilities - Integration and test of the LEO satellite and various complex subassemblies in a cleanroom and ESD controlled environment - Rigging and critical lifts of bulky, sensitive hardware - Use precision calibrated tools - torque wrenches, multimeters, optical inspection devices, micrometers and calipers - Read and interpret engineering drawings and technical documentation - Perform work according to procedures, specifications, and test instructions - Run functional and environmental testing on units - Use computer software programs for conducting tests - Collaborate with manufacturing engineers to develop and document activities, including continuous improvement opportunities - Perform other related duties, as assigned, for the purpose of ensuring an efficient, safe and effective work environment Additional Requirements: - Willing to work 4 / 10s as assigned: Estimated shift time: Sun-Wed 5pm-3:30am - Willing to work overtime and weekends as needed. - Flexible working/commuting in between site locations Redmond, WA and Kirkland, WA - Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position - Able to lift-up to 25lbs.
Final Integration Technician II, Amazon Leo AmazonFinal Integration Technician II, Amazon LeoKirkland, WAShifts may vary, depending on program needs Able to stand for long periods of time and perform repetitive assembly operations Able to climb and down ladders, work in tight spaces, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position Able to lift at least 25 lbs. We are seeking talented mid-level integration technicians on Back half(Wed-Sun) 1st shift to execute development and production integration and test activities of the Leo satellite in final integration.
SSL Technician II , Amazon Leo AmazonSSL Technician II , Amazon LeoRedmond, WAunassisted Basic Qualifications - 1+ years in a high traceability manufacturing environment, or relevant trade school certification - 1+ years using hand tools and/or precision measuring instruments (i.e., Calipers, multi-meters, torque wrenches) - 1+ years working with test tools and test methods that adequately validate the system - Experience reading, interpreting and working from engineering documentation and/or drawings Preferred Qualifications - - Aircraft & Powerplant (A&P) certification/license - CFOT certification or equivalent experience - Airman or Avionic certification or equivalent experience - ASE certification or equivalent experience - Experience in fast-paced production environment with flight hardware - Experience working with FOD, ESD sensitive hardware and clean room requirements - Experience working with Electro-Mechanical Assembly, Final Integration, Fiber Optics/Optical and/or Harness Integration - Ability to rapidly change roles/responsibilities while working in a high-paced, challenging work environment - Expert knowledge and certification in rigging and lifting equipment. Key job responsibilities - Follow work instructions and safety procedures - Assemble and test with emphasis to detail, an assortment of LRUs, electrical-mechanical assemblies, avionics, or other complex aerospace builds - Participate in process improvements, maintain floor stock inventory - You will independently execute and prioritize work to meet company deliverables - Execute test procedures for component and system level testing maintenance - Champion safety requirements in all designated zones and work locations - Ensure lab equipment is maintained and calibrated - Supports some preventative maintenance activities on test equipment and data acquisition systems - Receive shipments and coordinate deliveries with recipients (Using pallet jacks, kit carts, etc) - Your work may include contributing to improving SOPs and safety procedures Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Final Integration Technician II (2nd Shift), Final Integration AmazonFinal Integration Technician II (2nd Shift), Final IntegrationKirkland, WAWe are seeking talented mid-level integration technicians on back half (Wed-Sat) 2nd shift to execute development and production integration and test activities of the Leo satellite in final integration. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
R&O Technician III/IV Insight GlobalR&O Technician III/IVLynnwood, WACurrent or prior IPC soldering certification - Proven ability to test and troubleshoot down to the component level - Experience in Avionics/Aviation/FAA/FDA and 400Hz AC Power - Experience with legacy equipment: Analog Flight, Embedded Systems/Circuit Boards/Data Systems - Experience with repairing and fixing power supplies and manual electronic testing Experience with ATE, O-Scope, DMM, HiPot, Thermal Chambers, Signal Generators, Spectrum Analyzers - Strong understanding of raw materials, production processes, quality control, costs, and techniques used to optimize manufacturing and distribution - Practical knowledge of engineering electronics, science, and technology, including the application of principles, techniques, procedures, and equipment in product design and production - Working knowledge of circuit boards, processors, chips, electronic equipment, and computer hardware and software, including relevant applications and programming In addition, this role provides technical support and guidance to customers and internal teams, supports continuous improvement initiatives, promotes safe work practices, and assists with training and mentoring less experienced technicians within the value stream.
Service Technician North West Handling SystemsService TechnicianRenton, WashingtonRemoves faulty components using assortment of hand tools, pneumatic tools, lift truck jacks and hoists. Inspects, adjusts, repairs and rebuilds brake systems, Read display for fault codes.
Sterile Processing Technician 2 (Weekends, 90%) University of WashingtonSterile Processing Technician 2 (Weekends, 90%)Seattle, WashingtonAs the region's only Level I Trauma center, Harborview Medical Center is well known for innovations and excellence in trauma care and its centers of emphasis: Trauma, Burn, Neurosciences, AIDS/STD CARER, and mentally and medically vulnerable populations. Assemble and set up patient equipment such as IV pumps, vacuum regulators (wall suction), chest pumps, hyper/hypothermia units; test and make minor repairs and adjustments to equipment.
Lift Truck Service Technician-Everett Resident North West Handling SystemsLift Truck Service Technician-Everett ResidentRenton, WashingtonRemoves faulty components using assortment of hand tools, pneumatic tools, lift truck jacks and hoists. Trouble shoots and/or diagnosis lift truck to determine fault/failure or extent of malfunction/damage.
Hospital Central Services Technician 2 University of WashingtonHospital Central Services Technician 2Seattle, WAPRIMARY JOB RESPONSIBILITIES** + Pick up and transport soiled instruments, case carts, basins, respiratory items, and patient equipment from all patient care areas to the decontamination area for reprocessing + Assemble and set up patient equipment such as IV pumps, vacuum regulators (wall suction), chest pumps, hyper/hypothermia units; test and make minor repairs and adjustments to equipment + Load and operate semi-automatic cart washer to clean case carts, utility carts, patient chairs, etc. **WORK SCHEDULE** + Full-time + Day, Evening, and Night Shifts Available **POSITION HIGHLIGHTS** Support Harborview's Surgical Services / Operating Rooms by decontaminating, processing, sterilizing, and assembling complex surgical instrument arrangements **DEPARTMENT DESCRIPTION** Harborview 's Central Processing Unit manages the entire workflow of sterile instruments in the medical center and our supported clinics.
Compactor/Baler Technician with hydraulic experience Blankenship EquipmentCompactor/Baler Technician with hydraulic experienceAuburn, WA$28–$32 / hourEmployees have the option of a Health Savings Account (HSA) program or a traditional Health Insurance program. Welding/Cutting/Fabrication -Confident SMAW – Stick welding- various.
DFR Maintenance Technician BRINCDFR Maintenance TechnicianSeattle, WAOur cutting-edge solutions are utilized by over 600 public safety agencies across America and the company has raised over $150M from investors, including Index Ventures, Motorola Solutions, Sam Altman, Dylan Field, Mike Volpe, Alexandr Wang and more. Today, we've expanded into creating and deploying 911 response networks, where drones are dispatched to 911 calls to provide real-time visual data, enhancing safety and enabling de-escalation-focused responses.
Integration Technician III - 1st Shift, Amazon Leo Amazon.com IncIntegration Technician III - 1st Shift, Amazon LeoKirkland, WAAmazon Leo will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
MFG Technician, Amazon Leo Amazon.com IncMFG Technician, Amazon LeoRedmond, WAIts mission is to deliver fast, reliable internet to customers and communities around the world, and we've designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
Space Simulation Technician , Amazon Leo Amazon.com IncSpace Simulation Technician , Amazon LeoRedmond, WAIts mission is to deliver fast, reliable internet to customers and communities around the world, and we've designed the system with the capacity, flexibility, and performance to serve a wide range of customers, from individual households to schools, hospitals, businesses, government agencies, and other organizations operating in locations without reliable connectivity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.
OISL MFG Technician, Amazon Leo Amazon.com IncOISL MFG Technician, Amazon LeoRedmond, WAAmazon Leo will help close the digital divide by delivering fast, affordable broadband to a wide range of customers, including consumers, businesses, government agencies, and other organizations operating in places without reliable connectivity. Export Control Requirement: Due to applicable export control laws and regulations, candidates must be a U.S. citizen or national, U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.